Call 0804605175580% Response Rate
Send E-mail

Steel Flat Bars

Offering you a complete choice of products which include x40crmov5-1 die alloy steel steel flat bar, h13 die alloy steel flat bar, 4cr5mosiv1 alloy steel flat bar, 2344 die alloy steel flat bar, 2344 hot work steel flat bar and skd6 die steel flat bar.
Get CALLBACK

X40CRMOV5-1 Die Alloy Steel Steel Flat Bar

X40CRMOV5-1 Die Alloy Steel Steel Flat Bar
 
Get Best Quote
Approx. Rs 140 / Kg
Get Latest Price

Product Details:
Minimum Order Quantity200 Kg
MaterialSS
ApplicationAutomobile Industry
ShapeRectangular
Thickness20 to 400 mm
Hardness after quenching HRC55
Soft annealing Degree C760 - 810
CoolingFurnace
Width40 to 700 mm
Thermal Conductivity Degree C20-700
Hardening Degree C1030-1060
Hardness HBmax 240

Chemical Composition - (Typical Analysis in %)

STANDARDS

X40CrMoV5

H13

DIN 2344

AISI H13

AFNOR Z40CDV5

JIS SKD61

 

C

Si

Mn

P

S

Cr

Mo

V

0.35-0.45

0.90-1.20

0.30-0.50

<0.03

<0.004

4.90-5.40

1.20-1.75

0.90-1.20


Ventura Alloy and Steels supplies and stocks H13 tool steel in flat, square and round bar. We provide steel in all sizes as your requirements. Consult our team who will assist you for any query related to H13 steel.


SAE AISI H13 steel equivalent with JIS SKD61, GB 4Cr5MoSiV1 and DIN 1.2344 Tool Steel. AISI H13 steel consists of chromium, molybdenum and vanadium and is known for its high hardenability and great toughness.


The molybdenum and vanadium act as strengthening agents while the chromium content helps the AISI H-13 tool steel to withstand softening when used at high temperatures. It also combines shock and abrasion resistance, has good red hardness, can resist rapid cooling and withstand premature heat checking.


H13 Tool Steel has high hot-wear resistance abilities along with great strength, heat conductivity and invulnerability to hot cracking. It has good resistance to abrasion at each low and high temperature. It displays high level of toughness and ductility. H13 has Uniform and high level of machinability and polish ability. It has high-temperature strength and resistance to thermal fatigue, glorious through-hardening properties and shows very limited distortion during hardening.

 

H3 ESR is the most purified material with the conventional VD route. The nature of material increase the strength, exceptionally increase the micro-cleanness level. H13 ESR is most refined, has greater homogeneity and an exceptionally fine structure, resulting in improved machinability, polishing & high temperature tensile strength. Exceptionally suggest the use of AISI-H13 ESR grade for Aluminum Pressure Die Casting and other part subjected to high working temperatures and high weight quality. H13 is completely ultrasonic examined with 100% positive outcomes according to NDT standards.

 

Steel Properties:

  • Great toughness

  • Thermal conductivity

  • High hot-wear resistance

  • Hot tensile strength

  • Insusceptible for hot cracking (Hot Crack resistant)

  • Can be water-cooled to a restricted degree

  • High Hardenability

Application:

This steel is especially used for ejector pins, tool holders and shrink work chucks. It is majorly widely utilized for manufacture of hot forging die & inserts, hot gripper dies, hot nut tools, hot header dies, brass forging and pressing dies, hot forging aluminum base dies, aluminum casting and extrusion dies, zinc die casting dies, extrusion mandrels, cores, die holder blocks, hot press dies, hot work punches, etc.

Yes! I am interested
Get CALLBACK

H13 Die Alloy Steel Flat Bar

H13 Die Alloy Steel Flat Bar
 
Get Best Quote
Approx. Rs 170 / Kilogram
Get Latest Price

Product Details:
Minimum Order Quantity200 Kilogram
ApplicationAutomobile Industry
MaterialAlloy Steel
ShapeRectangular
Hardening Degree C1030-1060
Hardness HBmax 240
Width40 to 700 mm
CoolingFurnace
Thermal Conductivity Degree C20-700
Thickness20 to 400 mm
Soft annealing Degree C760 - 810
Hardness after quenching HRC55

Chemical Composition - (Typical Analysis in %)

STANDARDS

X40CrMoV5

H13

DIN 2344

AISI H13

AFNOR Z40CDV5

JIS SKD61

 

C

Si

Mn

P

S

Cr

Mo

V

0.35-0.45

0.90-1.20

0.30-0.50

<0.03

<0.004

4.90-5.40

1.20-1.75

0.90-1.20


Ventura Alloy and Steels supplies and stocks H13 tool steel in flat, square and round bar. We provide steel in all sizes as your requirements. Consult our team who will assist you for any query related to H13 steel.


SAE AISI H13 steel equivalent with JIS SKD61, GB 4Cr5MoSiV1 and DIN 1.2344 Tool Steel. AISI H13 steel consists of chromium, molybdenum and vanadium and is known for its high hardenability and great toughness.


The molybdenum and vanadium act as strengthening agents while the chromium content helps the AISI H-13 tool steel to withstand softening when used at high temperatures. It also combines shock and abrasion resistance, has good red hardness, can resist rapid cooling and withstand premature heat checking.


H13 Tool Steel has high hot-wear resistance abilities along with great strength, heat conductivity and invulnerability to hot cracking. It has good resistance to abrasion at each low and high temperature. It displays high level of toughness and ductility. H13 has Uniform and high level of machinability and polish ability. It has high-temperature strength and resistance to thermal fatigue, glorious through-hardening properties and shows very limited distortion during hardening.

 

H3 ESR is the most purified material with the conventional VD route. The nature of material increase the strength, exceptionally increase the micro-cleanness level. H13 ESR is most refined, has greater homogeneity and an exceptionally fine structure, resulting in improved machinability, polishing & high temperature tensile strength. Exceptionally suggest the use of AISI-H13 ESR grade for Aluminum Pressure Die Casting and other part subjected to high working temperatures and high weight quality. H13 is completely ultrasonic examined with 100% positive outcomes according to NDT standards.

 

Steel Properties:

  • Great toughness

  • Thermal conductivity

  • High hot-wear resistance

  • Hot tensile strength

  • Insusceptible for hot cracking (Hot Crack resistant)

  • Can be water-cooled to a restricted degree

  • High Hardenability

Application:

This steel is especially used for ejector pins, tool holders and shrink work chucks. It is majorly widely utilized for manufacture of hot forging die & inserts, hot gripper dies, hot nut tools, hot header dies, brass forging and pressing dies, hot forging aluminum base dies, aluminum casting and extrusion dies, zinc die casting dies, extrusion mandrels, cores, die holder blocks, hot press dies, hot work punches, etc.

 

Yes! I am interested
Get CALLBACK

4CR5MOSIV1 Alloy Steel Flat Bar

4CR5MOSIV1 Alloy Steel Flat Bar
 
Get Best Quote
Approx. Rs 170 / Kg
Get Latest Price

Product Details:
Minimum Order Quantity200 Kg
ApplicationAutomobile Industry
ShapeRectangular
Unit Length3 m
TechniqueHot Rolled
Thickness20 to 400 mm
Width40 to 700 mm
Soft annealing Degree C760 - 810 Deg C
Thermal Conductivity Degree C20-700 Deg C
Hardness HBMax 240
Hardening Degree C1030-1060 Deg C
Hardness after quenching HRC55 HRC

Chemical Composition - (Typical Analysis in %)

STANDARDS

X40CrMoV5

H13

DIN 2344

AISI H13

AFNOR Z40CDV5

JIS SKD61

 

C

Si

Mn

P

S

Cr

Mo

V

0.35-0.45

0.90-1.20

0.30-0.50

<0.03

<0.004

4.90-5.40

1.20-1.75

0.90-1.20


Ventura Alloy and Steels supplies and stocks H13 tool steel in flat, square and round bar. We provide steel in all sizes as your requirements. Consult our team who will assist you for any query related to H13 steel.


SAE AISI H13 steel equivalent with JIS SKD61, GB 4Cr5MoSiV1 and DIN 1.2344 Tool Steel. AISI H13 steel consists of chromium, molybdenum and vanadium and is known for its high hardenability and great toughness.


The molybdenum and vanadium act as strengthening agents while the chromium content helps the AISI H-13 tool steel to withstand softening when used at high temperatures. It also combines shock and abrasion resistance, has good red hardness, can resist rapid cooling and withstand premature heat checking.


H13 Tool Steel has high hot-wear resistance abilities along with great strength, heat conductivity and invulnerability to hot cracking. It has good resistance to abrasion at each low and high temperature. It displays high level of toughness and ductility. H13 has Uniform and high level of machinability and polish ability. It has high-temperature strength and resistance to thermal fatigue, glorious through-hardening properties and shows very limited distortion during hardening.

 

H3 ESR is the most purified material with the conventional VD route. The nature of material increase the strength, exceptionally increase the micro-cleanness level. H13 ESR is most refined, has greater homogeneity and an exceptionally fine structure, resulting in improved machinability, polishing & high temperature tensile strength. Exceptionally suggest the use of AISI-H13 ESR grade for Aluminum Pressure Die Casting and other part subjected to high working temperatures and high weight quality. H13 is completely ultrasonic examined with 100% positive outcomes according to NDT standards.

 

Steel Properties:

  • Great toughness
  • Thermal conductivity

  • High hot-wear resistance

  • Hot tensile strength

  • Insusceptible for hot cracking (Hot Crack resistant)

  • Can be water-cooled to a restricted degree

  • High Hardenability

Application:

This steel is especially used for ejector pins, tool holders and shrink work chucks. It is majorly widely utilized for manufacture of hot forging die & inserts, hot gripper dies, hot nut tools, hot header dies, brass forging and pressing dies, hot forging aluminum base dies, aluminum casting and extrusion dies, zinc die casting dies, extrusion mandrels, cores, die holder blocks, hot press dies, hot work punches, etc.


Price Range:

  • Rs.150 to 230 per Kg
Yes! I am interested
Get CALLBACK

2344 Die Alloy Steel Flat Bar

2344 Die Alloy Steel Flat Bar
 
Get Best Quote
Approx. Rs 170 / Kg
Get Latest Price

Product Details:
Minimum Order Quantity200 Kg
ShapeRectangular
ApplicationAutomobile Industry
MaterialAlloy Steel
Hardening Degree C1030-1060
Thermal Conductivity Degree C20-700
Thickness20 to 400 mm
Soft annealing Degree C760 - 810
Width40 to 700 mm
Hardness after quenching HRC55
CoolingFurnace
Hardness HBmax 240

Chemical Composition - (Typical Analysis in %)

STANDARDS

X40CrMoV5

H13

DIN 2344

AISI H13

AFNOR Z40CDV5

JIS SKD61

 

C

Si

Mn

P

S

Cr

Mo

V

0.35-0.45

0.90-1.20

0.30-0.50

<0.03

<0.004

4.90-5.40

1.20-1.75

0.90-1.20


Ventura Alloy and Steels supplies and stocks H13 tool steel in flat, square and round bar. We provide steel in all sizes as your requirements. Consult our team who will assist you for any query related to H13 steel.


SAE AISI H13 steel equivalent with JIS SKD61, GB 4Cr5MoSiV1 and DIN 1.2344 Tool Steel. AISI H13 steel consists of chromium, molybdenum and vanadium and is known for its high hardenability and great toughness.


The molybdenum and vanadium act as strengthening agents while the chromium content helps the AISI H-13 tool steel to withstand softening when used at high temperatures. It also combines shock and abrasion resistance, has good red hardness, can resist rapid cooling and withstand premature heat checking.


H13 Tool Steel has high hot-wear resistance abilities along with great strength, heat conductivity and invulnerability to hot cracking. It has good resistance to abrasion at each low and high temperature. It displays high level of toughness and ductility. H13 has Uniform and high level of machinability and polish ability. It has high-temperature strength and resistance to thermal fatigue, glorious through-hardening properties and shows very limited distortion during hardening.

 

H3 ESR is the most purified material with the conventional VD route. The nature of material increase the strength, exceptionally increase the micro-cleanness level. H13 ESR is most refined, has greater homogeneity and an exceptionally fine structure, resulting in improved machinability, polishing & high temperature tensile strength. Exceptionally suggest the use of AISI-H13 ESR grade for Aluminum Pressure Die Casting and other part subjected to high working temperatures and high weight quality. H13 is completely ultrasonic examined with 100% positive outcomes according to NDT standards.

 

Steel Properties:

  • Great toughness

  • Thermal conductivity

  • High hot-wear resistance

  • Hot tensile strength

  • Insusceptible for hot cracking (Hot Crack resistant)

  • Can be water-cooled to a restricted degree

  • High Hardenability

Application:

This steel is especially used for ejector pins, tool holders and shrink work chucks. It is majorly widely utilized for manufacture of hot forging die & inserts, hot gripper dies, hot nut tools, hot header dies, brass forging and pressing dies, hot forging aluminum base dies, aluminum casting and extrusion dies, zinc die casting dies, extrusion mandrels, cores, die holder blocks, hot press dies, hot work punches, etc.

Yes! I am interested
Get CALLBACK

2344 Hot Work Steel Flat Bar

2344 Hot Work Steel Flat Bar
 
Get Best Quote
Approx. Rs 170 / Kg
Get Latest Price

Product Details:
Minimum Order Quantity200 Kg
ApplicationAutomobile Industry
TechniqueHot Rolled
ShapeRectangular
Hardening Degree C1030-1060 Deg C
CoolingFurnace
Hardness HBMax 240
Thermal Conductivity Degree C20-700 Deg C
Hardness after quenching HRC55 HRC
Thickness20 to 400 mm
Width40 to 700 mm

We are offering 2344 Hot Work Stainless Steel Flat Bar to our clients.

Chemical Composition - (Typical Analysis in %)

STANDARDS

X40CrMoV5

H13

DIN 2344

AISI H13

AFNOR Z40CDV5

JIS SKD61

 

C

Si

Mn

P

S

Cr

Mo

V

0.35-0.45

0.90-1.20

0.30-0.50

<0.03

<0.004

4.90-5.40

1.20-1.75

0.90-1.20


Ventura Alloy and Steels supplies and stocks H13 tool steel in flat, square and round bar. We provide steel in all sizes as your requirements. Consult our team who will assist you for any query related to H13 steel.


SAE AISI H13 steel equivalent with JIS SKD61, GB 4Cr5MoSiV1 and DIN 1.2344 Tool Steel. AISI H13 steel consists of chromium, molybdenum and vanadium and is known for its high hardenability and great toughness.


The molybdenum and vanadium act as strengthening agents while the chromium content helps the AISI H-13 tool steel to withstand softening when used at high temperatures. It also combines shock and abrasion resistance, has good red hardness, can resist rapid cooling and withstand premature heat checking.


H13 Tool Steel has high hot-wear resistance abilities along with great strength, heat conductivity and invulnerability to hot cracking. It has good resistance to abrasion at each low and high temperature. It displays high level of toughness and ductility. H13 has Uniform and high level of machinability and polish ability. It has high-temperature strength and resistance to thermal fatigue, glorious through-hardening properties and shows very limited distortion during hardening.

 

H3 ESR is the most purified material with the conventional VD route. Exceptionally suggest the use of AISI-H13 ESR grade for Aluminum Pressure Die Casting and other part subjected to high working temperatures and high weight quality. H13 is completely ultrasonic examined with 100% positive outcomes according to NDT standards.

 

Steel Properties:

  • Great toughness
  • Thermal conductivity
  • High hot-wear resistance
  • Hot tensile strength
  • Insusceptible for hot cracking (Hot Crack resistant)
  • Can be water-cooled to a restricted degree
  • High Hardenability


Application:

This steel is especially used for ejector pins, tool holders and shrink work chucks. It is majorly widely utilized for manufacture of hot forging die & inserts, hot gripper dies, hot nut tools, hot header dies, brass forging and pressing dies, hot forging aluminum base dies, aluminum casting and extrusion dies, zinc die casting dies, extrusion mandrels, cores, die holder blocks, hot press dies, hot work punches, etc.

Yes! I am interested
Get CALLBACK

SKD6 Die Steel Flat Bar

SKD6 Die Steel Flat Bar
 
Get Best Quote
Approx. Rs 145 / Kg
Get Latest Price

Product Details:
Minimum Order Quantity200 Kg
ApplicationAutomobile Industry
ShapeRectangular
TechniqueHot Rolled
Hardness HBmax 230
Hardness after quenching HRC54
Thickness20 to 400 mm
CoolingFurnace
Width40 to 700 mm
Hardening Degree C1000-1030

Chemical Composition - (Typical Analysis in %)

STANDARDS

X37CrMoV5

H11

DIN 2343

AISI H11

AFNOR Z38CDV5

JIS SKD6


C

Si

Mn

P

S

Cr

Mo

V

0.33-0.41

0.80-1.00

0.25-0.50

0.003 max

0.030max

4.80-5.50

1.10-1.50

0.30-0.50


USA

Europe

Germany

China

Japan

India

R. of Korea

Russia

AISI / SAE

En

DIN, WNr

GB

JIS

IS

KS

GOST

H11

X37CrMoV5-1

X38CrMoV5-1

4Cr5MoSiV

SKD6

XT35Cr5Mo1V3

STD 6

4Ch5MFS


Ventura Alloy and Steels Supplies and Stocks AISI H11 tool steel is a 5% chromium hot work tool steel that is represented by its excellent impact toughness. Chromium hot-work tool steels are designated as group H steels according to the AISI classification system, and specified in ASTM A681 standard. The most commonly used chromium hot-work steels are H11 tool steel, H12 tool steel, and H13 steel, within the series from H1 to H19.


If we compare between H11 and H13, H11 tool steel consists of less vanadium than the commonly used H13 hot work tool steel. This gives H11 steels the higher toughness, with some reduction in wear resistance and tamper resistance. H11 tool steel is a deep-hardening, air-hardening steel and H11 alloy steel could be deep hardened by heat treatment and air-quenching. That gives minimal size change during heat treatment. H11 how work steel also has super resistance to thermal fatigue cracking and superb resistance to gross cracking and thermal shock when water cooled in service.


H11 steel is inclusive of all hot work tool steel with excellent rigidity and durability along with great thermal conductivity and invulnerability to hot cracking and can be water cooled to a constrained degree. H11 is primarily used for apparatus holders , ejector pins and shrink fit chucks.


Stel Properties:

  • Contains 5% Chromium

  • Greater strength

  • High toughness

  • Best thermal physical phenomenon

  • Resistant to hot cracking

  • Gives fundamental necessities to long tool life in press forging, die-casting, extrusion processes etc.


Application:

This grade isn't utilized for typical applications in the area of hot-work steels, yet additionally useful for tool holders, bridge kind tools, ejector pins, liner holders, hot work punches, forging dies, and shrink work chucks.


Yes! I am interested
Get CALLBACK

X38CRMOV5-1 Die Steel Flat Bar

X38CRMOV5-1 Die Steel Flat Bar
 
Get Best Quote
Approx. Rs 145 / Kilogram
Get Latest Price

Product Details:
Minimum Order Quantity200 Kilogram
ApplicationAutomobile Industry
Hardening Degree C1000-1030
CoolingFurnace
ShapeRectangular
Thickness20 to 400 mm
Width40 to 700 mm
Hardness HBmax 230
Hardness after quenching HRC54
MaterialAlloy Steel

Chemical Composition - (Typical Analysis in %)

STANDARDS

X37CrMoV5

H11

DIN 2343

AISI H11

AFNOR Z38CDV5

JIS SKD6


C

Si

Mn

P

S

Cr

Mo

V

0.33-0.41

0.80-1.00

0.25-0.50

0.003 max

0.030max

4.80-5.50

1.10-1.50

0.30-0.50


USA

Europe

Germany

China

Japan

India

R. of Korea

Russia

AISI / SAE

En

DIN, WNr

GB

JIS

IS

KS

GOST

H11

X37CrMoV5-1

X38CrMoV5-1

4Cr5MoSiV

SKD6

XT35Cr5Mo1V3

STD 6

4Ch5MFS


Ventura Alloy and Steels Supplies and Stocks AISI H11 tool steel is a 5% chromium hot work tool steel that is represented by its excellent impact toughness. Chromium hot-work tool steels are designated as group H steels according to the AISI classification system, and specified in ASTM A681 standard. The most commonly used chromium hot-work steels are H11 tool steel, H12 tool steel, and H13 steel, within the series from H1 to H19.


If we compare between H11 and H13, H11 tool steel consists of less vanadium than the commonly used H13 hot work tool steel. This gives H11 steels the higher toughness, with some reduction in wear resistance and tamper resistance. H11 tool steel is a deep-hardening, air-hardening steel and H11 alloy steel could be deep hardened by heat treatment and air-quenching. That gives minimal size change during heat treatment. H11 how work steel also has super resistance to thermal fatigue cracking and superb resistance to gross cracking and thermal shock when water cooled in service.


H11 steel is inclusive of all hot work tool steel with excellent rigidity and durability along with great thermal conductivity and invulnerability to hot cracking and can be water cooled to a constrained degree. H11 is primarily used for apparatus holders , ejector pins and shrink fit chucks.


Steel Properties:

  • Contains 5% Chromium

  • Greater strength

  • High toughness

  • Best thermal physical phenomenon

  • Resistant to hot cracking

  • Gives fundamental necessities to long tool life in press forging, die-casting, extrusion processes etc.


Application:

This grade isn't utilized for typical applications in the area of hot-work steels, yet additionally useful for tool holders, bridge kind tools, ejector pins, liner holders, hot work punches, forging dies, and shrink work chucks.

 

Yes! I am interested
Get CALLBACK

X37CRMOV5-1 Die Steel Flat Bar

X37CRMOV5-1 Die Steel Flat Bar
 
Get Best Quote
Approx. Rs 145 / Kilogram
Get Latest Price

Product Details:
Minimum Order Quantity200 Kilogram
ShapeRectangular
Usage/ApplicationConstruction
TechniqueHot Rolled
Thickness20 to 400 mm
Hardness HBmax 230
Hardening Degree C1000-1030
CoolingFurnace
Width40 to 700 mm
Hardness after quenching HRC54

Chemical Composition - (Typical Analysis in %)

STANDARDS

X37CrMoV5

H11

DIN 2343

AISI H11

AFNOR Z38CDV5

JIS SKD6


C

Si

Mn

P

S

Cr

Mo

V

0.33-0.41

0.80-1.00

0.25-0.50

0.003 max

0.030max

4.80-5.50

1.10-1.50

0.30-0.50


USA

Europe

Germany

China

Japan

India

R. of Korea

Russia

AISI / SAE

En

DIN, WNr

GB

JIS

IS

KS

GOST

H11

X37CrMoV5-1

X38CrMoV5-1

4Cr5MoSiV

SKD6

XT35Cr5Mo1V3

STD 6

4Ch5MFS


Ventura Alloy and Steels Supplies and Stocks AISI H11 tool steel is a 5% chromium hot work tool steel that is represented by its excellent impact toughness. Chromium hot-work tool steels are designated as group H steels according to the AISI classification system, and specified in ASTM A681 standard. The most commonly used chromium hot-work steels are H11 tool steel, H12 tool steel, and H13 steel, within the series from H1 to H19.


If we compare between H11 and H13, H11 tool steel consists of less vanadium than the commonly used H13 hot work tool steel. This gives H11 steels the higher toughness, with some reduction in wear resistance and tamper resistance. H11 tool steel is a deep-hardening, air-hardening steel and H11 alloy steel could be deep hardened by heat treatment and air-quenching. That gives minimal size change during heat treatment. H11 how work steel also has super resistance to thermal fatigue cracking and superb resistance to gross cracking and thermal shock when water cooled in service.


H11 steel is inclusive of all hot work tool steel with excellent rigidity and durability along with great thermal conductivity and invulnerability to hot cracking and can be water cooled to a constrained degree. H11 is primarily used for apparatus holders , ejector pins and shrink fit chucks.


Steel Properties:

  • Contains 5% Chromium

  • Greater strength

  • High toughness

  • Best thermal physical phenomenon

  • Resistant to hot cracking

  • Gives fundamental necessities to long tool life in press forging, die-casting, extrusion processes etc.


Application:

This grade isn't utilized for typical applications in the area of hot-work steels, yet additionally useful for tool holders, bridge kind tools, ejector pins, liner holders, hot work punches, forging dies, and shrink work chucks.

Yes! I am interested
Get CALLBACK

56NiCRMOV7 Die Steel Flat Bar

56NiCRMOV7 Die Steel Flat Bar
 
Get Best Quote
Approx. Rs 150 / Kg
Get Latest Price

Product Details:
Minimum Order Quantity200 Kg
MaterialAlloy Steel
ApplicationAutomobile Industry
ShapeRectangular
Thickness125 to 1000 mm
Coefficient of thermal expansionat Degree C20-700
Hardness HBmax 240
Hardness after quenching HRC55-57
Hardening Degree C840-900
CoolingFurnace
Soft annealing Degree C650-710
Width130 to 1600 mm

Chemical Composition - (Typical Analysis in %)

STANDARDS

55NiCrMoV7

DB6

DIN 2714

AISI L6

AFNOR 55NCDVV7

JIS SKT4

 

C

Si

Mn

P

S

Cr

Ni

Mo

V

0.50-0.60

0.10-0.40

0.65-0.95

<0.015

<0.004

1.0-1.20

1.50-1.80

0.45-0.55

0.07-0.12

 

USA

Europe

Germany

China

Japan

India

R. of Korea

Russia

AISI / SAE

En

DIN, WNr

GB

JIS

IS

KS

GOST

A681 L6

55NiCrMoV7

56NiCrMoV7

5CrNiMo

SKT4

T55Ni7Cr4Mo5V1

STF4

4ChMNFS

 

Ventura Alloy and Steels Stocks and Supplies Die Block Steels DB6 / 2714 in India and abroad. DB6 Steel is an extreme pass on steel with high treating resistance and great through-solidifying properties. Its nickel substance has it uncommonly effect safe – a highly recommendable element for vast mallet & press bites the dust alike. This evaluation is generally supplied in toughened condition or extinguished and tempered to 1300 N/mm² & a working hardness of 370 to 410 HB (round) or 355 to 400 HB (square, level).

Utilized as standard steel for manufacturing passes on of different kinds, press bites the dust, expulsion kicks the bucket, retainer plates, heavily clad trim bites the dust, hot shear sharpened pieces of steels and instrument holder.


Process Route:

EAF+LF+VD+UPSET+FORGED+ANNEALED+ROUGH TURNED FOR ROUNDS/MILLED FOR FLATS+OIL QUENCHED AND DOUBLE TEMPERED+ROUGH TURNED FOR ROUNDS/MILLED FOR FLATS


Steel Properties:

The exceptional Hot Work Pre-solidified Steel has great toughness and high wear resistance. DB6 Steel is generally provided in hard, quenched, tempered and annealed condition in strengthened condition in exceptional cases. Normally it's working hardness is 360-430 BHN. This steel grade is the updated type of DIN 2713 for higher efficiency and performance.


Application:

Dies for Specially Drop and Close Die Forgings for Hammers & Mechanical Presses, Die Moulds, Shoe Blocks, Die Holder, Piston Rods, Bolster, Cranks, Cassettes, Plastic Moulds, Shearing Blades, Tools etc.

 

Yes! I am interested
Get CALLBACK

L6 Die Steel Flat Bar

L6 Die Steel Flat Bar
 
Get Best Quote
Approx. Rs 150 / Kg
Get Latest Price

Product Details:
Minimum Order Quantity200 Kg
Usage/ApplicationConstruction
ShapeRectangular
TechniqueHot Rolled
Thickness125 - 1000 mm
Width130 to 1600 mm
Hardness after quenching HRC55-57
Soft annealing Degree C650-710
CoolingFurnace
Coefficient of thermal expansionat Degree C20-700
Hardness HBmax 240
Hardening Degree C840-900

Chemical Composition - (Typical Analysis in %)

STANDARDS

55NiCrMoV7

DB6

DIN 2714

AISI L6

AFNOR 55NCDVV7

JIS SKT4


C

Si

Mn

P

S

Cr

Ni

Mo

V

0.50-0.60

0.10-0.40

0.65-0.95

<0.015

<0.004

1.0-1.20

1.50-1.80

0.45-0.55

0.07-0.12


USA

Europe

Germany

China

Japan

India

R. of Korea

Russia

AISI / SAE

En

DIN, WNr

GB

JIS

IS

KS

GOST

A681 L6

55NiCrMoV7

56NiCrMoV7

5CrNiMo

SKT4

T55Ni7Cr4Mo5V1

STF4

4ChMNFS


Ventura Alloy and Steels Stocks and Supplies Die Block Steels DB6 / 2714 in India and abroad. DB6 Steel is an extreme pass on steel with high treating resistance and great through-solidifying properties. Its nickel substance has it uncommonly effect safe – a highly recommendable element for vast mallet & press bites the dust alike. This evaluation is generally supplied in toughened condition or extinguished and tempered to 1300 N/mm² & a working hardness of 370 to 410 HB (round) or 355 to 400 HB (square, level).

Utilized as standard steel for manufacturing passes on of different kinds, press bites the dust, expulsion kicks the bucket, retainer plates, heavily clad trim bites the dust, hot shear sharpened pieces of steels and instrument holder.


Process Route:

EAF+LF+VD+UPSET+FORGED+ANNEALED+ROUGH TURNED FOR ROUNDS/MILLED FOR FLATS+OIL QUENCHED AND DOUBLE TEMPERED+ROUGH TURNED FOR ROUNDS/MILLED FOR FLATS


Steel Properties:

The exceptional Hot Work Pre-solidified Steel has great toughness and high wear resistance. DB6 Steel is generally provided in hard, quenched, tempered and annealed condition in strengthened condition in exceptional cases. Normally it's working hardness is 360-430 BHN. This steel grade is the updated type of DIN 2713 for higher efficiency and performance.


Application:

Dies for Specially Drop and Close Die Forgings for Hammers & Mechanical Presses, Die Moulds, Shoe Blocks, Die Holder, Piston Rods, Bolster, Cranks, Cassettes, Plastic Moulds, Shearing Blades, Tools etc.

 

Yes! I am interested
Get CALLBACK

SKD5 Die Block Steel Flat Bar

SKD5 Die Block Steel Flat Bar
 
Get Best Quote
Approx. Rs 350 / Kg
Get Latest Price

Product Details:
Minimum Order Quantity200 Kg
ApplicationExtrusion
ShapeRectangular
TechniqueHot Rolled
CoolingSlowly
Soft annealing Degree C780-810
Coefficient of thermal expansionat Degree C20-700
Hardness after quenching HRC53
QuenchingOil or Hot Bath,600-650 degree C
Thickness5 - 500 mm
Hardness HBMax 240
Hardening Degree C1000-1130

Chemical Composition - (Typical Analysis in %)

STANDARDS

X30WCrV-3

H21

DIN 2581

AISI H21

AFNOR 32CDV12-28

JIS SKD5


C

Si

Mn

P

S

Cr

W

V

0.26-0.36

0.15-0.25

0.20-0.40

0.003 max

0.030max

3.00-3.75

8.50-10.00

0.30-0.60


USA

France

Germany

China

Japan

England

Sweden

AISI / SAE

AFNOR

DIN, WNr

GB

JIS

BS

 

H21 / T20821

X30WCrV9

X30WCrV93 / 1.2581

3Cr2W8V

SKD5

BH21

2730


H21 Steel is a hot work tool steel for oil or air hardening to develop high hot quality, support of hardness, and warmth checking resistance.

This is mostly utilized as hot work devices, instruments for manufacture of hollows, screws, rivets, nuts and bolts. Die casting tools, forming dies, die inserts, hot shear blades.


Steel Properties

Hot work steel has great toughness and contains Tungsten, Chromium, Carbon, Vanadium and generally its working hardness is 40.0 to 55.0 HRC size and is accessible in round, level and square shapes.


Application:

The H21 tungsten hot-work tool steels are primarily utilized for hot-working dies and tooling. For example extrusion, die casting & hot-forming of parts.


Physical Properties:

Coefficient of Thermal Expansion at °C

10¯??? m / (m*K)

20-100

11.2

20-200

11.9

20-300

12.2

20-400

12.5

20-500

12.8

20-600

13.0

20-700

13.2


Thermal Conductivity at °C

W / (m*K)

100

27.0

400

29.8

675

29.1


Tempering°C after quenching

100

210

300

400

500

550

600

650

700

HRC

49

49

49

49

51

51

50

46

36


Price range: Rs.350 to 750 per kg
Yes! I am interested
Get CALLBACK

D3 Cold Work Steel Flat Bars

D3 Cold Work Steel Flat Bars
 
Get Best Quote
Approx. Rs 143 / Onwards
Get Latest Price

Product Details:
Minimum Order Quantity200 Onwards
Usage/ApplicationConstruction
TechniqueCold Rolled
Thickness60 - 1000 mm
CoolingFurnace
Coefficient of Thermal expansion at Degree C20-700 Deg C
Hardening Degree C940-980 Deg C
Thermal Conductivity at Degree C20-700 Deg C
Soft annealing Degree CApprox 670-720 Deg C

We are offering D3 Cold Work Steel Flat Bars to our clients.

STANDARDS

X210CrW12

HCHCR-D3

DIN 2080

AISI D3

AFNOR Z210W12-01

JIS SKD1

 


CHEMICAL COMPOSITION (Typical Analysis in %)

 

C

Si

Mn

P

S

Cr

2.00-2.35

0.10-0.60

0.20-0.60

0.030max

0.030max

11.00-13.00

 


Ventura Alloy and Steels Supplies and Stocks HCHCR-D3 Steel in India and abroad. D3 Steel have 12% ledeburitic chromium tool steel with great wear resistance. Basically it is used as cutting tools for sheets up to 4 mm thickness, blanking dies for paper and plastics, trimming dies, shear cutting edges and rotational shear edges for sheet thicknesses up to 2 mm.

STEEL PROPERTIES

D3 Steel contains properties of High Carbon 2% and High chromium 12 % tool steel with high wear resistance ability. Its supply condition is typically annealed to easy machining and its prescribed hardness is 57-58 HRC after making the dies and tools.

APPLICATION

HCHCR D3 is utilized in cold dies and tooling application which requires high degree (level) of accuracy in hardening and tempering. For example, dies drawing, forming cold rolls, blanking dies for paper and plastics, powder metal tooling and blanking & trimming dies, shear blades, ejector pins, cold die punches etc.

PHYSICAL PROPERTIES

 

Coefficient of Thermal Expansion at °C

10¯??? m / (m*K)

20-100

10.7

20-200

11.6

20-300

12.3

20-400

12.6

20-500

12.9

20-600

13.2

20-700

13.3

 

 

 

Thermal Conductivity at °C

W / (m*K)

20

16.6

350

20.5

700

24.3

 

 ROUND - 8 to 450 MM | SQUARE - 11 to 155 MM

SIZE RANGE

FLATS - THICKNESS : 6 TO 150 MM | WIDTH : 20 to 505 MM

Yes! I am interested
Explore More Products
X
Find UsAashish Shah (Chairman & Managing Director) Ventura Alloy And Steels Private Limited
Unit No.1201 & 1202, Ghanshyam Enclave P. Co-Op, Soc. Ltd., New Link Road, Kandivali West, Mumbai - 400067, Maharashtra, India
SEND SMS
SEND E-MAIL
Share Us: