Call 0804605175580% Response Rate
Send E-mail

Die Steel Blocks

Prominent & Leading Wholesale Trader from Mumbai, we offer die block steel, 55nicrmov7 hot rolled steel block, en24 alloy steel block, x21ocr12 cold work steel block, 1.2080 cold work steel block and 1.2714 hot rolled steel block.
Get CALLBACK

Die Block Steel

Die Block Steel
 
Get Best Quote
Approx. Rs 100 / Onwards
Get Latest Price

Product Details:
Minimum Order Quantity200 Onwards
Usage/ApplicationAny Industry
ShapeAs per requirement
Material GradeDB6
DiameterAs per requirement
MaterialDIN 2714
BrandVentura

We are manufacturer and supplier of DB6 Steel Die Block .


Chemical Composition - (Typical Analysis in %)

STANDARDS

55NiCrMoV7

DB6

DIN 2714

AISI L6

AFNOR 55NCDVV7

JIS SKT4

 

C

Si

Mn

P

S

Cr

Ni

Mo

V

0.50-0.60

0.10-0.40

0.65-0.95

<0.015

<0.004

1.0-1.20

1.50-1.80

0.45-0.55

0.07-0.12

 

USA

Europe

Germany

China

Japan

India

R. of Korea

Russia

AISI / SAE

En

DIN, WNr

GB

JIS

IS

KS

GOST

A681 L6

55NiCrMoV7

56NiCrMoV7

5CrNiMo

SKT4

T55Ni7Cr4Mo5V1

STF4

4ChMNFS

 

Ventura Alloy and Steels Stocks and Supplies Die Block Steels DB6 / 2714 in India and abroad. DB6 Steel is an extreme pass on steel with high treating resistance and great through-solidifying properties. Its nickel substance has it uncommonly effect safe – a highly recommendable element for vast mallet & press bites the dust alike. This evaluation is generally supplied in toughened condition or extinguished and tempered to 1300 N/mm² & a working hardness of 370 to 410 HB (round) or 355 to 400 HB (square, level).

Utilized as standard steel for manufacturing passes on of different kinds, press bites the dust, expulsion kicks the bucket, retainer plates, heavily clad trim bites the dust, hot shear sharpened pieces of steels and instrument holder.

Utilized as standard steel for manufacturing passes on of different kinds, press bites the dust, expulsion kicks the bucket, retainer plates, heavily clad trim bites the dust, hot shear sharpened pieces of steels and instrument holder.

 

Process Route:

Eaf+Lf+Vd+Upset+Forged+Annealed+Rough Turned For Rounds/Milled For Flats+Oil Quenched And Double Tempered+ Rough Turned For Rounds/Milled For Flats


Steel Properties:
The special Hot Work Pre-hardened Steel has great toughness and high wear resistance. DB6 Steel is generally supplied in hard, quenched, tempered and also in annealed condition in special cases. Usually it's working hardness is 360-430 BHN. This steel grade is the upgraded version of DIN 2713 for greater efficiency and performance.


Application:
Dies for Specially Drop and Close Die Forgings for Hammers & Mechanical Presses, Die Moulds, Shoe Blocks, Die Holder, Cassettes, Piston Rods, Cranks, Boaster, Shearing Blades, Tools, Plastic Moulds etc.



Additional Information:
  • Production Capacity: As per requirement
  • Delivery Time: As per availability
Yes! I am interested
Get CALLBACK

55NICRMOV7 Hot Rolled Steel Block

55NICRMOV7 Hot Rolled Steel Block
 
Get Best Quote
Approx. Rs 150 / Kilogram
Get Latest Price

Product Details:
Minimum Order Quantity200 Kilogram
ApplicationConstruction
ShapeRectangular
Hardness HBMax 240
Hardening Degree C840-900
CoolingFurnace
Width130 to 1600 mm
Hardness after quenching HRC55-57
Soft annealing Degree C650-710
Coefficient of thermal expansionat Degree C20-700
Thickness125 to 1000 mm

Chemical Composition - (Typical Analysis in %)

STANDARDS

55NiCrMoV7

DB6

DIN 2714

AISI L6

AFNOR 55NCDVV7

JIS SKT4

 

C

Si

Mn

P

S

Cr

Ni

Mo

V

0.50-0.60

0.10-0.40

0.65-0.95

<0.015

<0.004

1.0-1.20

1.50-1.80

0.45-0.55

0.07-0.12

 

USA

Europe

Germany

China

Japan

India

R. of Korea

Russia

AISI / SAE

En

DIN, WNr

GB

JIS

IS

KS

GOST

A681 L6

55NiCrMoV7

56NiCrMoV7

5CrNiMo

SKT4

T55Ni7Cr4Mo5V1

STF4

4ChMNFS

 

Ventura Alloy and Steels Stocks and Supplies Die Block Steels DB6 / 2714 in India and abroad. DB6 Steel is an extreme pass on steel with high treating resistance and great through-solidifying properties. Its nickel substance has it uncommonly effect safe – a highly recommendable element for vast mallet & press bites the dust alike. This evaluation is generally supplied in toughened condition or extinguished and tempered to 1300 N/mm² & a working hardness of 370 to 410 HB (round) or 355 to 400 HB (square, level).

Utilized as standard steel for manufacturing passes on of different kinds, press bites the dust, expulsion kicks the bucket, retainer plates, heavily clad trim bites the dust, hot shear sharpened pieces of steels and instrument holder.


Process Route:

EAF+LF+VD+UPSET+FORGED+ANNEALED+ROUGH TURNED FOR ROUNDS/MILLED FOR FLATS+OIL QUENCHED AND DOUBLE TEMPERED+ROUGH TURNED FOR ROUNDS/MILLED FOR FLATS


Steel Properties:

The exceptional Hot Work Pre-solidified Steel has great toughness and high wear resistance. DB6 Steel is generally provided in hard, quenched, tempered and annealed condition in strengthened condition in exceptional cases. Normally it's working hardness is 360-430 BHN. This steel grade is the updated type of DIN 2713 for higher efficiency and performance.


Application:

Dies for Specially Drop and Close Die Forgings for Hammers & Mechanical Presses, Die Moulds, Shoe Blocks, Die Holder, Piston Rods, Bolster, Cranks, Cassettes, Plastic Moulds, Shearing Blades, Tools etc.

 


Yes! I am interested
Get CALLBACK

55NICRMOV7 Hot Rolled Steel Block

55NICRMOV7 Hot Rolled Steel Block
 
Get Best Quote
Approx. Rs 150 / Kilogram
Get Latest Price

Product Details:
Minimum Order Quantity200 Kilogram
Thickness125 to 1000 mm
ApplicationAutomobile Industry
ShapeRectangular
CoolingFurnace
Soft annealing Degree C650-710 Deg C
Coefficient of thermal expansionat Degree C20-700 Deg C
Hardness HBMax 240
Hardening Degree C840-900 Deg C
Hardness after quenching HRC55-57 Deg C

Chemical Composition - (Typical Analysis in %)

STANDARDS

55NiCrMoV7

DB6

DIN 2714

AISI L6

AFNOR 55NCDVV7

JIS SKT4

 

C

Si

Mn

P

S

Cr

Ni

Mo

V

0.50-0.60

0.10-0.40

0.65-0.95

<0.015

<0.004

1.0-1.20

1.50-1.80

0.45-0.55

0.07-0.12

 

USA

Europe

Germany

China

Japan

India

R. of Korea

Russia

AISI / SAE

En

DIN, WNr

GB

JIS

IS

KS

GOST

A681 L6

55NiCrMoV7

56NiCrMoV7

5CrNiMo

SKT4

T55Ni7Cr4Mo5V1

STF4

4ChMNFS

 

Ventura Alloy and Steels Stocks and Supplies Die Block Steels DB6 / 2714 in India and abroad. DB6 Steel is an extreme pass on steel with high treating resistance and great through-solidifying properties. Its nickel substance has it uncommonly effect safe – a highly recommendable element for vast mallet & press bites the dust alike. This evaluation is generally supplied in toughened condition or extinguished and tempered to 1300 N/mm² & a working hardness of 370 to 410 HB (round) or 355 to 400 HB (square, level).

Utilized as standard steel for manufacturing passes on of different kinds, press bites the dust, expulsion kicks the bucket, retainer plates, heavily clad trim bites the dust, hot shear sharpened pieces of steels and instrument holder.


Stel Properties:

The exceptional Hot Work Pre-solidified Steel has great toughness and high wear resistance. DB6 Steel is generally provided in hard, quenched, tempered and annealed condition in strengthened condition in exceptional cases. Normally it's working hardness is 360-430 BHN. This steel grade is the updated type of DIN 2713 for higher efficiency and performance.


Application:

Dies for Specially Drop and Close Die Forgings for Hammers & Mechanical Presses, Die Moulds, Shoe Blocks, Die Holder, Piston Rods, Bolster, Cranks, Cassettes, Plastic Moulds, Shearing Blades, Tools etc.

Yes! I am interested
Get CALLBACK

EN24 Alloy Steel Block

EN24 Alloy Steel Block
 
Get Best Quote
Approx. Rs 70 / Kilogram
Get Latest Price

Product Details:
Minimum Order Quantity200 Kilogram
TechniqueCold Rolled
Thickness15 to 105 mm
GradeEN-24
ApplicationAutomobile Industry
ShapeRectangular
MaterialAlloy Steel
Width40 to 405 mm

As rolled and Spheroidized Annealed

Standard

Grade

C

Mn

P

S

Si

Ni

Cr

Mo

ASTM A29

4340

0.38-0.43

0.60-0.80

0.035 max

0.040 max

0.15-0.35

1.65-2.00

0.70-0.90

0.20-0.30

EN 10250

36CrNiMo4 / 1.6511

0.32-0.40

0.50-0.80

0.035 max

0.035 max

0.40 max

0.90-1.20

0.90-1.2

0.15-0.30

BS 970

EN24 / 817M40

0.36-0.44

0.45-0.70

0.035 max

0.040 max

0.10-0.40

1.30-1.70

1.00-1.40

0.20-0.35

JIS G4103

SNCM 439 / SNCM 8

0.36-0.43

0.60-0.90

0.035 max

0.030 max

0.15-0.35

1.60-2.00

0.60-1.00

0.15-0.30


EN24 steel is a medium carbon, low alloy steel known for its toughness and strength in generally large sections. EN24 is likewise one kind of nickel chromium molybdenum steels. It can be supplied hardened and tempered in the tensile range of 930-1080 Mpa as well as annealed condition. Pre hardened and tempered EN24 steels can be further surface hardened by flame or induction hardening and by nitriding. EN24 steel is high tensile alloy steel famous for its excellent wear resistance properties and in addition to where high strength properties are required. This Grade is used in components affiliated to shafts, gears, studs and bolts. Its hardness is within the range of 248~302 HB.


Steel Properties:

  • Standard high-speed steel grade
  • Contains well-balanced alloy composition
  • High toughness
  • Great cutting edge retention


Physical Properties:

Thermal Conductivity at °C

W / (m*K)

20

40.5

350

32.5

700

25.5


Heat Treatment:

Soft Annealing °C

650-700

Cooling

Slowly

Hardness HB

max. 280

Stress-relief Annealing °C

630-650

Cooling

Furnace


1st Pre-Heating °C

up to approx. 400 in an air-circulating furnace

2nd and 3rd

780 and 1000

Hardening °C

1190-1230

Quenching

Salt Bath, at least 520°C Oil, Air

Tempering °C

at least twice 530-560

Hardness after Temperature HRC

64-66

 

Yes! I am interested
Get CALLBACK

X21OCR12 Cold Work Steel Block

X21OCR12 Cold Work Steel Block
 
Get Best Quote
Approx. Rs 135 / Kilogram
Get Latest Price

Product Details:
Minimum Order Quantity200 Kilogram
Usage/ApplicationConstruction
Thickness20 - 150 mm
Soft annealing Degree C810-850 Deg C
CoolingFurnace
Hardness after quenching HRC64.5 HRC
Hardness HBMax 250
Width40 - 450 mm
Coefficient of Thermal expansion at Degree C20 - 700 Deg C

We are offering X21OCR12 Cold Work Stainless Steel Block to our clients.

Steel Properties:

  • D3 Steel
  • High Carbon - 2%
  • High Chromium - 12%
Yes! I am interested
Get CALLBACK

1.2080 Cold Work Steel Block

1.2080 Cold Work Steel Block
 
Get Best Quote
Approx. Rs 145 / Kg
Get Latest Price

Product Details:
Minimum Order Quantity200 Kg
Usage/ApplicationConstruction
Thickness20 - 150 mm
TechniqueCold Rolled
Hardness HBMax 230
QuenchingOil,Air (up to 30 mm thickness)
CoolingFurnace
Tempering Degree C after Quenching100-600 Deg C
Width50 - 155 mm
Soft annealing Degree C810-850 Deg C

We are offering 1.2080 Cold Work Steel Block to our clients.

Steel Properties:

  • High Carbon High Chromium contents.
  • High wear resistant and toughness due to Vanadium addition of 0.90%.
  • Supply condition is an Annealed which offer hardness to reach 57-59 HRC.
  • Machinable in annealed condition.
  • Better steel than D3 due to high alloy properties.


Application:

HCHCR D2 tool steel can be utilized for cold stamping or forming dies, cold forming rolls, slitters, shear blades, tools, tyre shredders, chipper knives, punches, trimming, cutting threading dies, stamping tools and more.


Physical Properties:

Coefficient of Thermal Expansion at °C

10-??? m / (m*K)

20-100

10.6

20-200

11.5

20-300

11.8

20-400

12.3


Thermal Conductivity at °C

W / (m*K)

20

16.7

350

20.5

700

24.2

 

Heat Treatment:

Soft Annealing °C

840-870

Cooling

Furnace

Hardness HB

max. 250

Stress-relief Annealing °C

approx. 660-710

Hardening °C

1000-1050

Quenching

Air, Oil, Salt Bath 500-550°C

Hardness after quenching HRC

63


Tempering°C after quenching

100

200

300

400

500

525

550

600

HRC

64

61.5

58.5

58.5

59

60

57

50

Yes! I am interested
Get CALLBACK

1.2714 Hot Rolled Steel Block

1.2714 Hot Rolled Steel Block
  • +8
 
Get Best Quote
Approx. Rs 150 / Kilogram
Get Latest Price
Product Brochure

Product Details:
Minimum Order Quantity200 Kilogram
Material GradeDB6
ShapeRectangular
Hardness after quenching HRC55-57
Coefficient of thermal expansionat Degree C20-700
Hardening Degree C840-900
CoolingFurnace
Soft annealing Degree C650-710
Hardness HBMax 240
Thickness125 to 1000 mm
Width130 to 1600 mm

We are offering 1.2714 Stainless Steel Block to our clients.

Chemical Composition - (Typical Analysis in %)

STANDARDS

55NiCrMoV7

DB6

DIN 2714

AISI L6

AFNOR 55NCDVV7

JIS SKT4

 

C

Si

Mn

P

S

Cr

Ni

Mo

V

0.50-0.60

0.10-0.40

0.65-0.95

<0.015

<0.004

1.0-1.20

1.50-1.80

0.45-0.55

0.07-0.12

 

USA

Europe

Germany

China

Japan

India

R. of Korea

Russia

AISI / SAE

En

DIN, WNr

GB

JIS

IS

KS

GOST

A681 L6

55NiCrMoV7

56NiCrMoV7

5CrNiMo

SKT4

T55Ni7Cr4Mo5V1

STF4

4ChMNFS

 

Ventura Alloy and Steels Stocks and Supplies Die Block Steels DB6 / 2714 in India and abroad. DB6 Steel is an extreme pass on steel with high treating resistance and great through-solidifying properties. Its nickel substance has it uncommonly effect safe – a highly recommendable element for vast mallet & press bites the dust alike. This evaluation is generally supplied in toughened condition or extinguished and tempered to 1300 N/mm² & a working hardness of 370 to 410 HB (round) or 355 to 400 HB (square, level).

Utilized as standard steel for manufacturing passes on of different kinds, press bites the dust, expulsion kicks the bucket, retainer plates, heavily clad trim bites the dust, hot shear sharpened pieces of steels and instrument holder.


Process Route:

EAF+LF+VD+UPSET+FORGED+ANNEALED+ROUGH TURNED FOR ROUNDS/MILLED FOR FLATS+OIL QUENCHED AND DOUBLE TEMPERED+ROUGH TURNED FOR ROUNDS/MILLED FOR FLATS


Steel Properties:

The exceptional Hot Work Pre-solidified Steel has great toughness and high wear resistance. DB6 Steel is generally provided in hard, quenched, tempered and annealed condition in strengthened condition in exceptional cases. Normally it's working hardness is 360-430 BHN. This steel grade is the updated type of DIN 2713 for higher efficiency and performance.


Application:

Dies for Specially Drop and Close Die Forgings for Hammers & Mechanical Presses, Die Moulds, Shoe Blocks, Die Holder, Piston Rods, Bolster, Cranks, Cassettes, Plastic Moulds, Shearing Blades, Tools etc.

Yes! I am interested
Get CALLBACK

Hot Work Tool Steel

Hot Work Tool Steel
 
Get Best Quote
Approx. Rs 140 / Kg
Get Latest Price

Product Details:
Minimum Order Quantity200 Kg
Usage/ApplicationAny Industry
LengthAs per requirement
MaterialSteel
Surface FinishingAs per requirement
HardnessAs per requirement
Surface ConditionAs per requirement
Surface TreatmentAs per requirement
ThicknessAs per requirement

We are a reputed manufacturer of Hot work tool steel based out from Mumbai. We deliver PAN GLOBE.

Additional Information:
  • Production Capacity: As per requirement
  • Delivery Time: 1 week
  • Packaging Details: Export worthy packaging
Yes! I am interested
Get CALLBACK

DB6 Tool Steel

DB6 Tool Steel
 
Get Best Quote
Approx. Rs 150 / Kilogram
Get Latest Price

Product Details:
Minimum Order Quantity200 Kilogram
ApplicationConstruction
MaterialAlloy Steel
ShapeRounds, Blocks
Hardening Degree C840-900
Hardness HBMax 240
Hardness after quenching HRC55-57
CoolingFurnace

We are manufacturer and supplier Of DB6 Tool Steel.


Chemical Composition - (Typical Analysis in %)

STANDARDS

55NiCrMoV7

DB6

DIN 2714

AISI L6

AFNOR 55NCDVV7

JIS SKT4

 

C

Si

Mn

P

S

Cr

Ni

Mo

V

0.50-0.60

0.10-0.40

0.65-0.95

<0.015

<0.004

1.0-1.20

1.50-1.80

0.45-0.55

0.07-0.12

 

USA

Europe

Germany

China

Japan

India

R. of Korea

Russia

AISI / SAE

En

DIN, WNr

GB

JIS

IS

KS

GOST

A681 L6

55NiCrMoV7

56NiCrMoV7

5CrNiMo

SKT4

T55Ni7Cr4Mo5V1

STF4

4ChMNFS

 

Ventura Alloy and Steels Stocks and Supplies Die Block Steels DB6 / 2714 in India and abroad. DB6 Steel is an extreme pass on steel with high treating resistance and great through-solidifying properties. Its nickel substance has it uncommonly effect safe – a highly recommendable element for vast mallet & press bites the dust alike. This evaluation is generally supplied in toughened condition or extinguished and tempered to 1300 N/mm² & a working hardness of 370 to 410 HB (round) or 355 to 400 HB (square, level).

Utilized as standard steel for manufacturing passes on of different kinds, press bites the dust, expulsion kicks the bucket, retainer plates, heavily clad trim bites the dust, hot shear sharpened pieces of steels and instrument holder.

Utilized as standard steel for manufacturing passes on of different kinds, press bites the dust, expulsion kicks the bucket, retainer plates, heavily clad trim bites the dust, hot shear sharpened pieces of steels and instrument holder.

 

Process Route:

Eaf+Lf+Vd+Upset+Forged+Annealed+Rough Turned For Rounds/Milled For Flats+Oil Quenched And Double Tempered+ Rough Turned For Rounds/Milled For Flats


Steel Properties:
The special Hot Work Pre-hardened Steel has great toughness and high wear resistance. DB6 Steel is generally supplied in hard, quenched, tempered and also in annealed condition in special cases. Usually it''s working hardness is 360-430 BHN. This steel grade is the upgraded version of DIN 2713 for greater efficiency and performance.


Application:
Dies for Specially Drop and Close Die Forgings for Hammers & Mechanical Presses, Die Moulds, Shoe Blocks, Die Holder, Cassettes, Piston Rods, Cranks, Boaster, Shearing Blades, Tools, Plastic Moulds etc.


Size Range:
ROUNDS - 60 to 1000 MM DIA

BLOCKS - Thickness - 125 to 1000 MM MAX | Width - 130 to 1600 MM MAX


PRICE RANGEL:
ROUNDS -
Rs.145 to 170 per Kg
BLOCKS - Rs.155 to 195 per Kg

Stocking Partners:
We keep the materials from Germany, Japan and China.

For PHYSICAL PROPERTIES & HEAT TREATMENT, refer our website http://www.venturasteels.com/

Yes! I am interested
Get CALLBACK

1.2714 Die Steel Block

1.2714 Die Steel Block
 
Get Best Quote
Approx. Rs 135 / Onwards
Get Latest Price

Product Details:
Minimum Order Quantity200 Onwards
ApplicationConstruction
ShapeRectangular
Coefficient of thermal expansionat Degree C20-700 Deg C
Width130 to 1600 mm
Hardness after quenching HRC55-57 HRC
Hardness HBMax 240
Hardening Degree C840-900 Deg C
CoolingFurnace
Soft annealing Degree C650-710 Deg C
Thickness125 to 1000 mm

We are offering 1.2714 Die Steel Block to our clients.

Chemical Composition - (Typical Analysis in %)

STANDARDS

55NiCrMoV7

DB6

DIN 2714

AISI L6

AFNOR 55NCDVV7

JIS SKT4

 

C

Si

Mn

P

S

Cr

Ni

Mo

V

0.50-0.60

0.10-0.40

0.65-0.95

<0.015

<0.004

1.0-1.20

1.50-1.80

0.45-0.55

0.07-0.12

 

USA

Europe

Germany

China

Japan

India

R. of Korea

Russia

AISI / SAE

En

DIN, WNr

GB

JIS

IS

KS

GOST

A681 L6

55NiCrMoV7

56NiCrMoV7

5CrNiMo

SKT4

T55Ni7Cr4Mo5V1

STF4

4ChMNFS

 

Ventura Alloy and Steels Stocks and Supplies Die Block Steels DB6 / 2714 in India and abroad. DB6 Steel is an extreme pass on steel with high treating resistance and great through-solidifying properties. Its nickel substance has it uncommonly effect safe – a highly recommendable element for vast mallet & press bites the dust alike. This evaluation is generally supplied in toughened condition or extinguished and tempered to 1300 N/mm² & a working hardness of 370 to 410 HB (round) or 355 to 400 HB (square, level).

Utilized as standard steel for manufacturing passes on of different kinds, press bites the dust, expulsion kicks the bucket, retainer plates, heavily clad trim bites the dust, hot shear sharpened pieces of steels and instrument holder.

 

Process Route:

Eaf+Lf+Vd+Upset+Forged+Annealed+Rough Turned For Rounds/Milled For Flats+Oil Quenched And Double Tempered+ Rough Turned For Rounds/Milled For Flats


Steel Properties:
The special Hot Work Pre-hardened Steel has great toughness and high wear resistance. DB6 Steel is generally supplied in hard, quenched, tempered and also in annealed condition in special cases. Usually it's working hardness is 360-430 BHN. This steel grade is the upgraded version of DIN 2713 for greater efficiency and performance.


Application:
Dies for Specially Drop and Close Die Forgings for Hammers & Mechanical Presses, Die Moulds, Shoe Blocks, Die Holder, Cassettes, Piston Rods, Cranks, Boaster, Shearing Blades, Tools, Plastic Moulds etc.


Yes! I am interested
Get CALLBACK

SKT4 Die Steel Block

SKT4 Die Steel Block
 
Get Best Quote
Approx. Rs 150 / Onwards
Get Latest Price

Product Details:
Minimum Order Quantity200 Onwards
Thickness125 - 1000 mm
Hardness HBMax 240
Hardness after quenching HRC55-57
Soft annealing Degree C650-710 Deg C
Coefficient of thermal expansionat Degree C20-700 Deg C
Hardening Degree C840-900 Deg C
ShapeRectangular
Width130 - 1600 mm
CoolingFurnace

We are offering SKT4 Die Steel Block to our clients.


Chemical Composition - (Typical Analysis in %)

STANDARDS

55NiCrMoV7

DB6

DIN 2714

AISI L6

AFNOR 55NCDVV7

JIS SKT4

 

C

Si

Mn

P

S

Cr

Ni

Mo

V

0.50-0.60

0.10-0.40

0.65-0.95

<0.015

<0.004

1.0-1.20

1.50-1.80

0.45-0.55

0.07-0.12

 

USA

Europe

Germany

China

Japan

India

R. of Korea

Russia

AISI / SAE

En

DIN, WNr

GB

JIS

IS

KS

GOST

A681 L6

55NiCrMoV7

56NiCrMoV7

5CrNiMo

SKT4

T55Ni7Cr4Mo5V1

STF4

4ChMNFS

 

Ventura Alloy and Steels Stocks and Supplies Die Block Steels DB6 / 2714 in India and abroad. DB6 Steel is an extreme pass on steel with high treating resistance and great through-solidifying properties. Its nickel substance has it uncommonly effect safe – a highly recommendable element for vast mallet & press bites the dust alike. This evaluation is generally supplied in toughened condition or extinguished and tempered to 1300 N/mm² & a working hardness of 370 to 410 HB (round) or 355 to 400 HB (square, level).

Utilized as standard steel for manufacturing passes on of different kinds, press bites the dust, expulsion kicks the bucket, retainer plates, heavily clad trim bites the dust, hot shear sharpened pieces of steels and instrument holder.

 

Process Route:

Eaf+Lf+Vd+Upset+Forged+Annealed+Rough Turned For Rounds/Milled For Flats+Oil Quenched And Double Tempered+ Rough Turned For Rounds/Milled For Flats


Steel Properties:
The special Hot Work Pre-hardened Steel has great toughness and high wear resistance. DB6 Steel is generally supplied in hard, quenched, tempered and also in annealed condition in special cases. Usually it's working hardness is 360-430 BHN. This steel grade is the upgraded version of DIN 2713 for greater efficiency and performance.


Application:
Dies for Specially Drop and Close Die Forgings for Hammers & Mechanical Presses, Die Moulds, Shoe Blocks, Die Holder, Cassettes, Piston Rods, Cranks, Boaster, Shearing Blades, Tools, Plastic Moulds etc.

Yes! I am interested
Get CALLBACK

4CR5MOSIV1 Die Block Steel

4CR5MOSIV1 Die Block Steel
 
Get Best Quote
Approx. Rs 170 / Kg
Get Latest Price

Product Details:
Minimum Order Quantity200 Kg
ApplicationAutomobile Industry
MaterialSpring Steel
Thickness20 to 400 mm
Hardness after quenching HRC55
Hardening Degree C1030-1060
CoolingFurnace
Thermal Conductivity Degree C20-700
Width40 to 700 mm
Soft annealing Degree C760 - 810
Hardness HBmax 240

Chemical Composition - (Typical Analysis in %)

STANDARDS

X40CrMoV5

H13

DIN 2344

AISI H13

AFNOR Z40CDV5

JIS SKD61

 

C

Si

Mn

P

S

Cr

Mo

V

0.35-0.45

0.90-1.20

0.30-0.50

<0.03

<0.004

4.90-5.40

1.20-1.75

0.90-1.20


Ventura Alloy and Steels supplies and stocks H13 tool steel in flat, square and round bar. We provide steel in all sizes as your requirements. Consult our team who will assist you for any query related to H13 steel.


SAE AISI H13 steel equivalent with JIS SKD61, GB 4Cr5MoSiV1 and DIN 1.2344 Tool Steel. AISI H13 steel consists of chromium, molybdenum and vanadium and is known for its high hardenability and great toughness.


The molybdenum and vanadium act as strengthening agents while the chromium content helps the AISI H-13 tool steel to withstand softening when used at high temperatures. It also combines shock and abrasion resistance, has good red hardness, can resist rapid cooling and withstand premature heat checking.


H13 Tool Steel has high hot-wear resistance abilities along with great strength, heat conductivity and invulnerability to hot cracking. It has good resistance to abrasion at each low and high temperature. It displays high level of toughness and ductility. H13 has Uniform and high level of machinability and polish ability. It has high-temperature strength and resistance to thermal fatigue, glorious through-hardening properties and shows very limited distortion during hardening.

 

H3 ESR is the most purified material with the conventional VD route. The nature of material increase the strength, exceptionally increase the micro-cleanness level. H13 ESR is most refined, has greater homogeneity and an exceptionally fine structure, resulting in improved machinability, polishing & high temperature tensile strength. Exceptionally suggest the use of AISI-H13 ESR grade for Aluminum Pressure Die Casting and other part subjected to high working temperatures and high weight quality. H13 is completely ultrasonic examined with 100% positive outcomes according to NDT standards.

 

Steel Properties:

  • Great toughness

  • Thermal conductivity

  • High hot-wear resistance

  • Hot tensile strength

  • Insusceptible for hot cracking (Hot Crack resistant)

  • Can be water-cooled to a restricted degree

  • High Hardenability

Application:

This steel is especially used for ejector pins, tool holders and shrink work chucks. It is majorly widely utilized for manufacture of hot forging die & inserts, hot gripper dies, hot nut tools, hot header dies, brass forging and pressing dies, hot forging aluminum base dies, aluminum casting and extrusion dies, zinc die casting dies, extrusion mandrels, cores, die holder blocks, hot press dies, hot work punches, etc.

 

Yes! I am interested
Get CALLBACK

2714 Tool Steel Block

2714 Tool Steel Block
 
Get Best Quote
Approx. Rs 135 / Kg
Get Latest Price

Product Details:
Minimum Order Quantity200 Kg
ApplicationConstruction
ShapeRctangular
Hardening Degree C840-900 Deg C
Hardness after quenching HRC55-57 HRC
CoolingFurnace
Thickness125 to 1000 mm
Width130 to 1600 mm
Hardness HBMax 240

We are offering 2714 Tool Steel Block to our clients.

Chemical Composition - (Typical Analysis in %)

STANDARDS

55NiCrMoV7

DB6

DIN 2714

AISI L6

AFNOR 55NCDVV7

JIS SKT4

 

C

Si

Mn

P

S

Cr

Ni

Mo

V

0.50-0.60

0.10-0.40

0.65-0.95

<0.015

<0.004

1.0-1.20

1.50-1.80

0.45-0.55

0.07-0.12

 

USA

Europe

Germany

China

Japan

India

R. of Korea

Russia

AISI / SAE

En

DIN, WNr

GB

JIS

IS

KS

GOST

A681 L6

55NiCrMoV7

56NiCrMoV7

5CrNiMo

SKT4

T55Ni7Cr4Mo5V1

STF4

4ChMNFS

 

Ventura Alloy and Steels Stocks and Supplies Die Block Steels DB6 / 2714 in India and abroad. DB6 Steel is an extreme pass on steel with high treating resistance and great through-solidifying properties. Its nickel substance has it uncommonly effect safe – a highly recommendable element for vast mallet & press bites the dust alike. This evaluation is generally supplied in toughened condition or extinguished and tempered to 1300 N/mm² & a working hardness of 370 to 410 HB (round) or 355 to 400 HB (square, level).


Utilized as standard steel for manufacturing passes on of different kinds, press bites the dust, expulsion kicks the bucket, retainer plates, heavily clad trim bites the dust, hot shear sharpened pieces of steels and instrument holder.


Process Route:

EAF+LF+VD+UPSET+FORGED+ANNEALED+ROUGH TURNED FOR ROUNDS/MILLED FOR FLATS+OIL QUENCHED AND DOUBLE TEMPERED+ROUGH TURNED FOR ROUNDS/MILLED FOR FLATS


Steel Properties:

The exceptional Hot Work Pre-solidified Steel has great toughness and high wear resistance. DB6 Steel is generally provided in hard, quenched, tempered and annealed condition in strengthened condition in exceptional cases. Normally it's working hardness is 360-430 BHN. This steel grade is the updated type of DIN 2713 for higher efficiency and performance.


Application:

Dies for Specially Drop and Close Die Forgings for Hammers & Mechanical Presses, Die Moulds, Shoe Blocks, Die Holder, Piston Rods, Bolster, Cranks, Cassettes, Plastic Moulds, Shearing Blades, Tools etc.

Yes! I am interested
Get CALLBACK

2343 Hot Die Steel Block

2343 Hot Die Steel Block
 
Get Best Quote
Approx. Rs 145 / Kg
Get Latest Price

Product Details:
Minimum Order Quantity200 Kg
ApplicationAutomobile Industry
ShapeRectangular
TechniqueHot Rolled
Thickness20 to 400 mm
Hardness after quenching HRC54
CoolingFurnace
Width40 to 700 mm
Hardening Degree C1000-1030
Hardness HBMax 230

We are offering 2343 Hot Die Steel Block to our clients.

Chemical Composition - (Typical Analysis in %)

STANDARDS

X37CrMoV5

H11

DIN 2343

AISI H11

AFNOR Z38CDV5

JIS SKD6

 

C

Si

Mn

P

S

Cr

Mo

V

0.33-0.41

0.80-1.00

0.25-0.50

0.003 max

0.030max

4.80-5.50

1.10-1.50

0.30-0.50

 

USA

Europe

Germany

China

Japan

India

R. of Korea

Russia

AISI / SAE

En

DIN, WNr

GB

JIS

IS

KS

GOST

H11

X37CrMoV5-1

X38CrMoV5-1

4Cr5MoSiV

SKD6

XT35Cr5Mo1V3

STD 6

4Ch5MFS

 

Ventura Alloy and Steels Supplies and Stocks AISI H11 tool steel is a 5% chromium hot work tool steel that is represented by its excellent impact toughness. Chromium hot-work tool steels are designated as group H steels according to the AISI classification system, and specified in ASTM A681 standard. The most commonly used chromium hot-work steels are H11 tool steel, H12 tool steel, and H13 steel, within the series from H1 to H19.


If we compare between H11 and H13, H11 tool steel consists of less vanadium than the commonly used H13 hot work tool steel. This gives H11 steels the higher toughness, with some reduction in wear resistance and tamper resistance. That gives minimal size change during heat treatment. H11 how work steel also has super resistance to thermal fatigue cracking and superb resistance to gross cracking and thermal shock when water cooled in service.


H11 steel is inclusive of all hot work tool steel with excellent rigidity and durability along with great thermal conductivity and invulnerability to hot cracking and can be water cooled to a constrained degree. H11 is primarily used for apparatus holders ,ejector pins and shrink fit chucks.


Steel Properties:

  • Contains 5% Chromium
  • Greater strength
  • High toughness
  • Best thermal physical phenomenon
  • Resistant to hot cracking
  • Gives fundamental necessities to long tool life in press forging, die-casting, extrusion proceses etc.


Application:

This grade isn't utilized for typical applications in the area of hot-work steels, yet additionally useful for tool holders, bridge kind tools, ejector pins, liner holders, hot work punches, forging dies, and shrink work chucks.

Yes! I am interested
Get CALLBACK

2343 Hot Work Steel Block

2343 Hot Work Steel Block
 
Get Best Quote
Approx. Rs 145 / Kg
Get Latest Price

Product Details:
Minimum Order Quantity200 Kg
Usage/ApplicationAutomobile Industry
ShapeRectangular
Thickness20 to 400 mm
CoolingFurnace
Hardening Degree C1000-1030
Hardness HBMax 230
Hardness after quenching HRC54
Width40 to 700 mm

We are offering 2343 Hot Work Steel Block to our clients.

Chemical Composition - (Typical Analysis in %)


STANDARDS

X37CrMoV5

H11

DIN 2343

AISI H11

AFNOR Z38CDV5

JIS SKD6


C

Si

Mn

P

S

Cr

Mo

V

0.33-0.41

0.80-1.00

0.25-0.50

0.003 max

0.030max

4.80-5.50

1.10-1.50

0.30-0.50


USA

Europe

Germany

China

Japan

India

R. of Korea

Russia

AISI / SAE

En

DIN, WNr

GB

JIS

IS

KS

GOST

H11

X37CrMoV5-1

X38CrMoV5-1

4Cr5MoSiV

SKD6

XT35Cr5Mo1V3

STD 6

4Ch5MFS


Ventura Alloy and Steels Supplies and Stocks AISI H11 tool steel is a 5% chromium hot work tool steel that is represented by its excellent impact toughness. Chromium hot-work tool steels are designated as group H steels according to the AISI classification system, and specified in ASTM A681 standard. The most commonly used chromium hot-work steels are H11 tool steel, H12 tool steel, and H13 steel, within the series from H1 to H19.


If we compare between H11 and H13, H11 tool steel consists of less vanadium than the commonly used H13 hot work tool steel. That gives minimal size change during heat treatment. H11 how work steel also has super resistance to thermal fatigue cracking and superb resistance to gross cracking and thermal shock when water cooled in service.


H11 steel is inclusive of all hot work tool steel with excellent rigidity and durability along with great thermal conductivity and invulnerability to hot cracking and can be water cooled to a constrained degree. H11 is primarily used for apparatus holders , ejector pins and shrink fit chucks.


Steel Properties:

  • Contains 5% Chromium
  • Greater strength
  • High toughness
  • Best thermal physical phenomenon
  • Resistant to hot cracking
  • Gives fundamental necessities to long tool life in press forging, die-casting, extrusion processes etc.


Application:

This grade isn't utilized for typical applications in the area of hot-work steels, yet additionally useful for tool holders, bridge kind tools, ejector pins, liner holders, hot work punches, forging dies, and shrink work chucks.


Yes! I am interested
Get CALLBACK

1.2344 with EFS Hot Work Steel Block

1.2344 with EFS Hot Work Steel Block
 
Get Best Quote
Approx. Rs 200 / Kg
Get Latest Price

Product Details:
Minimum Order Quantity200 Kg
Usage/ApplicationConstruction
ShapeRectangular
TechniqueHot Rolled
Thickness20 to 400 mm
Hardness after quenching HRC55 HRC
Soft annealing Degree C760 - 810 Deg C
Thermal Conductivity Degree C20-700 Deg C
Width40 to 700 mm
Coefficient of thermal expansionat Degree C20-700 Deg C
Hardness HBMax 240
CoolingFurnace

We are offering 1.2344 Hot Work Steel Block to our clients.

Chemical Composition - (Typical Analysis in %)

STANDARDS

X40CrMoV5

H13

DIN 2344

AISI H13

AFNOR Z40CDV5

JIS SKD61

 

C

Si

Mn

P

S

Cr

Mo

V

0.35-0.45

0.90-1.20

0.30-0.50

<0.03

<0.004

4.90-5.40

1.20-1.75

0.90-1.20


Ventura Alloy and Steels supplies and stocks H13 tool steel in flat, square and round bar. We provide steel in all sizes as your requirements. Consult our team who will assist you for any query related to H13 steel.


SAE AISI H13 steel equivalent with JIS SKD61, GB 4Cr5MoSiV1 and DIN 1.2344 Tool Steel. AISI H13 steel consists of chromium, molybdenum and vanadium and is known for its high hardenability and great toughness.


The molybdenum and vanadium act as strengthening agents while the chromium content helps the AISI H-13 tool steel to withstand softening when used at high temperatures.


H13 Tool Steel has high hot-wear resistance abilities along with great strength, heat conductivity and invulnerability to hot cracking. It has high-temperature strength and resistance to thermal fatigue, glorious through-hardening properties and shows very limited distortion during hardening.

 

H3 ESR is the most purified material with the conventional VD route. The nature of material increase the strength, exceptionally increase the micro-cleanness level. H13 ESR is most refined, has greater homogeneity and an exceptionally fine structure, resulting in improved machinability, polishing & high temperaturetensile strength. Exceptionally suggest the use of AISI-H13 ESR grade for Aluminum Pressure Die Casting and other part subjected to high working temperatures and high weight quality. H13 is completely ultrasonic examined with 100% positive outcomes according to NDT standards.

 

Steel Properties:

  • Great toughness
  • Thermal conductivity
  • High hot-wear resistance
  • Hot tensile strength
  • Insusceptible for hot cracking (Hot Crack resistant)
  • Can be water-cooled to a restricted degree
  • High Hardenability


Application:

This steel is especially used for ejector pins, tool holders and shrink work chucks. It is majorly widely utilized for manufacture of hot forging die & inserts, hot gripper dies, hot nut tools, hot header dies, brass forging and pressing dies, hot forging aluminum base dies, aluminum casting and extrusion dies, zinc die casting dies, extrusion mandrels, cores, die holder blocks, hot press dies, hot work punches, etc.

Yes! I am interested
Get CALLBACK

SKD5 Die Steel Block

SKD5 Die Steel Block
 
Get Best Quote
Approx. Rs 350 / Kg
Get Latest Price

Product Details:
Minimum Order Quantity200 Kg
ApplicationExtrusion
ShapeRectangular
Hardening Degree C1000-1130
CoolingSlowly
Soft annealing Degree C780-810
QuenchingOil or Hot Bath,600-650 degree C
Hardness after quenching HRC53
Coefficient of thermal expansionat Degree C20-700
Hardness HBMax 240

Chemical Composition - (Typical Analysis in %)

STANDARDS

X30WCrV-3

H21

DIN 2581

AISI H21

AFNOR 32CDV12-28

JIS SKD5


C

Si

Mn

P

S

Cr

W

V

0.26-0.36

0.15-0.25

0.20-0.40

0.003 max

0.030max

3.00-3.75

8.50-10.00

0.30-0.60


USA

France

Germany

China

Japan

England

Sweden

AISI / SAE

AFNOR

DIN, WNr

GB

JIS

BS

 

H21 / T20821

X30WCrV9

X30WCrV93 / 1.2581

3Cr2W8V

SKD5

BH21

2730


H21 Steel is a hot work tool steel for oil or air hardening to develop high hot quality, support of hardness, and warmth checking resistance.

This is mostly utilized as hot work devices, instruments for manufacture of hollows, screws, rivets, nuts and bolts. Die casting tools, forming dies, die inserts, hot shear blades.


Steel Properties:

Hot work steel has great toughness and contains Tungsten, Chromium, Carbon, Vanadium and generally its working hardness is 40.0 to 55.0 HRC size and is accessible in round, level and square shapes.


Application:

The H21 tungsten hot-work tool steels are primarily utilized for hot-working dies and tooling. For example extrusion, die casting & hot-forming of parts.


Physical Properties:

Coefficient of Thermal Expansion at °C

10¯??? m / (m*K)

20-100

11.2

20-200

11.9

20-300

12.2

20-400

12.5

20-500

12.8

20-600

13.0

20-700

13.2


Thermal Conductivity at °C

W / (m*K)

100

27.0

400

29.8

675

29.1


Tempering°C after quenching

100

210

300

400

500

550

600

650

700

HRC

49

49

49

49

51

51

50

46

36


Price range: 350-750 per kg
Yes! I am interested
Get CALLBACK

2714 Hot Work Steel Block

2714 Hot Work Steel Block
 
Get Best Quote
Approx. Rs 150 / Kg
Get Latest Price

Product Details:
Minimum Order Quantity200 Kg
Usage/ApplicationConstruction
ShapeRectangular
Thickness60 to 1000 mm
Hardness HBMax 240
Hardening Degree C840-900 Deg C
Hardness after quenching HRC55-57 HRC
Soft annealing Degree C650-710 Deg C
CoolingFurnace

We are offering 2714 Hot Work Steel Block to our clients.

Chemical Composition - (Typical Analysis in %)

STANDARDS

55NiCrMoV7

DB6

DIN 2714

AISI L6

AFNOR 55NCDVV7

JIS SKT4

 

C

Si

Mn

P

S

Cr

Ni

Mo

V

0.50-0.60

0.10-0.40

0.65-0.95

<0.015

<0.004

1.0-1.20

1.50-1.80

0.45-0.55

0.07-0.12

 

USA

Europe

Germany

China

Japan

India

R. of Korea

Russia

AISI / SAE

En

DIN, WNr

GB

JIS

IS

KS

GOST

A681 L6

55NiCrMoV7

56NiCrMoV7

5CrNiMo

SKT4

T55Ni7Cr4Mo5V1

STF4

4ChMNFS

 

Ventura Alloy and Steels Stocks and Supplies Die Block Steels DB6 / 2714 in India and abroad. DB6 Steel is an extreme pass on steel with high treating resistance and great through-solidifying properties. Its nickel substance has it uncommonly effect safe – a highly recommendable element for vast mallet & press bites the dust alike. This evaluation is generally supplied in toughened condition or extinguished and tempered to 1300 N/mm² & a working hardness of 370 to 410 HB (round) or 355 to 400 HB (square, level).


Utilized as standard steel for manufacturing passes on of different kinds, press bites the dust, expulsion kicks the bucket, retainer plates, heavily clad trim bites the dust, hot shear sharpened pieces of steels and instrument holder.


Process Route:

EAF+LF+VD+UPSET+FORGED+ANNEALED+ROUGH TURNED FOR ROUNDS/MILLED FOR FLATS+OIL QUENCHED AND DOUBLE TEMPERED+ROUGH TURNED FOR ROUNDS/MILLED FOR FLATS


Steel Properties:

The exceptional Hot Work Pre-solidified Steel has great toughness and high wear resistance. DB6 Steel is generally provided in hard, quenched, tempered and annealed condition in strengthened condition in exceptional cases. Normally it's working hardness is 360-430 BHN. This steel grade is the updated type of DIN 2713 for higher efficiency and performance.


Application:

Dies for Specially Drop and Close Die Forgings for Hammers & Mechanical Presses, Die Moulds, Shoe Blocks, Die Holder, Piston Rods, Bolster, Cranks, Cassettes, Plastic Moulds, Shearing Blades, Tools etc.

 

Yes! I am interested
Get CALLBACK

1.2714 Die Steel Block

1.2714 Die Steel Block
 
Get Best Quote
Approx. Rs 135 / Onwards
Get Latest Price

Product Details:
Minimum Order Quantity200 Onwards
Usage/ApplicationAutomobile Industry
ShapeRectangular
Thickness125 to 1000 mm
Surface FinishingPolish
Soft annealing Degree C650-710 Deg C
Hardness HBMax 240
Hardening Degree C840-900 Deg C
CoolingFurnace
Coefficient of thermal expansionat Degree C20-700 Deg C
Hardness after quenching HRC55-57 HRC
Width130 to 1600 mm

We are offering 1.2714 Die Steel Block to our clients.

Chemical Composition - (Typical Analysis in %)

STANDARDS

55NiCrMoV7

DB6

DIN 2714

AISI L6

AFNOR 55NCDVV7

JIS SKT4

 

C

Si

Mn

P

S

Cr

Ni

Mo

V

0.50-0.60

0.10-0.40

0.65-0.95

<0.015

<0.004

1.0-1.20

1.50-1.80

0.45-0.55

0.07-0.12

 

USA

Europe

Germany

China

Japan

India

R. of Korea

Russia

AISI / SAE

En

DIN, WNr

GB

JIS

IS

KS

GOST

A681 L6

55NiCrMoV7

56NiCrMoV7

5CrNiMo

SKT4

T55Ni7Cr4Mo5V1

STF4

4ChMNFS

 

Ventura Alloy and Steels Stocks and Supplies Die Block Steels DB6 / 2714 in India and abroad. DB6 Steel is an extreme pass on steel with high treating resistance and great through-solidifying properties. Its nickel substance has it uncommonly effect safe – a highly recommendable element for vast mallet & press bites the dust alike. This evaluation is generally supplied in toughened condition or extinguished and tempered to 1300 N/mm² & a working hardness of 370 to 410 HB (round) or 355 to 400 HB (square, level).

Utilized as standard steel for manufacturing passes on of different kinds, press bites the dust, expulsion kicks the bucket, retainer plates, heavily clad trim bites the dust, hot shear sharpened pieces of steels and instrument holder.


Process Route:

EAF+LF+VD+UPSET+FORGED+ANNEALED+ROUGH TURNED FOR ROUNDS/MILLED FOR FLATS+OIL QUENCHED AND DOUBLE TEMPERED+ROUGH TURNED FOR ROUNDS/MILLED FOR FLATS


Steel Properties:

The exceptional Hot Work Pre-solidified Steel has great toughness and high wear resistance. DB6 Steel is generally provided in hard, quenched, tempered and annealed condition in strengthened condition in exceptional cases. Normally it's working hardness is 360-430 BHN. This steel grade is the updated type of DIN 2713 for higher efficiency and performance.


Application:

Dies for Specially Drop and Close Die Forgings for Hammers & Mechanical Presses, Die Moulds, Shoe Blocks, Die Holder, Piston Rods, Bolster, Cranks, Cassettes, Plastic Moulds, Shearing Blades, Tools etc.

 

Yes! I am interested
Get CALLBACK

2714 Die Block Steel Block

2714 Die Block Steel Block
 
Get Best Quote
Approx. Rs 140 / Onwards
Get Latest Price

Product Details:
Minimum Order Quantity200 Onwards
Usage/ApplicationAutomobile Industry
ShapeRectangular
Thickness125 to 1000 mm
Hardness HBMax 240
Hardening Degree C840-900 Deg C
Hardness after quenching HRC55-57 HRC
Tempering Degree C after quenching100-600 Deg C

We are offering 2714 Die Block Steel Block to our clients.

Chemical Composition - (Typical Analysis in %)

STANDARDS

55NiCrMoV7

DB6

DIN 2714

AISI L6

AFNOR 55NCDVV7

JIS SKT4


C

Si

Mn

P

S

Cr

Ni

Mo

V

0.50-0.60

0.10-0.40

0.65-0.95

<0.015

<0.004

1.0-1.20

1.50-1.80

0.45-0.55

0.07-0.12

 

USA

Europe

Germany

China

Japan

India

R. of Korea

Russia

AISI / SAE

En

DIN, WNr

GB

JIS

IS

KS

GOST

A681 L6

55NiCrMoV7

56NiCrMoV7

5CrNiMo

SKT4

T55Ni7Cr4Mo5V1

STF4

4ChMNFS

 

Ventura Alloy and Steels Stocks and Supplies Die Block Steels DB6 / 2714 in India and abroad. DB6 Steel is an extreme pass on steel with high treating resistance and great through-solidifying properties. Its nickel substance has it uncommonly effect safe – a highly recommendable element for vast mallet & press bites the dust alike. This evaluation is generally supplied in toughened condition or extinguished and tempered to 1300 N/mm² & a working hardness of 370 to 410 HB (round) or 355 to 400 HB (square, level).

Utilized as standard steel for manufacturing passes on of different kinds, press bites the dust, expulsion kicks the bucket, retainer plates, heavily clad trim bites the dust, hot shear sharpened pieces of steels and instrument holder.

 

Process Route:

Eaf+Lf+Vd+Upset+Forged+Annealed+Rough Turned For Rounds/Milled For Flats+Oil Quenched And Double Tempered+ Rough Turned For Rounds/Milled For Flats


Steel Properties:
The special Hot Work Pre-hardened Steel has great toughness and high wear resistance. DB6 Steel is generally supplied in hard, quenched, tempered and also in annealed condition in special cases. Usually it's working hardness is 360-430 BHN. This steel grade is the upgraded version of DIN 2713 for greater efficiency and performance.


Application:
Dies for Specially Drop and Close Die Forgings for Hammers & Mechanical Presses, Die Moulds, Shoe Blocks, Die Holder, Cassettes, Piston Rods, Cranks, Boaster, Shearing Blades, Tools, Plastic Moulds etc.


Yes! I am interested
Get CALLBACK

55NICRMOV7 Die Steel Block

55NICRMOV7 Die Steel Block
 
Get Best Quote
Approx. Rs 150 / Onwards
Get Latest Price

Product Details:
Minimum Order Quantity200 Onwards
ApplicationAutomobile Industry
ShapeRectangular
Width130 to 1600 mm
Coefficient of thermal expansionat Degree C20-700
Hardness HBMax 240
Hardening Degree C840-900
Hardness after quenching HRC55-57
CoolingFurnace
Soft annealing Degree C650-710
MaterialSS
Thickness125 to 1000 mm

We are offering 55NICRMOV7 Die Steel Block to our clients.

Chemical Composition - (Typical Analysis in %)

STANDARDS

55NiCrMoV7

DB6

DIN 2714

AISI L6

AFNOR 55NCDVV7

JIS SKT4

 

C

Si

Mn

P

S

Cr

Ni

Mo

V

0.50-0.60

0.10-0.40

0.65-0.95

<0.015

<0.004

1.0-1.20

1.50-1.80

0.45-0.55

0.07-0.12

 

USA

Europe

Germany

China

Japan

India

R. of Korea

Russia

AISI / SAE

En

DIN, WNr

GB

JIS

IS

KS

GOST

A681 L6

55NiCrMoV7

56NiCrMoV7

5CrNiMo

SKT4

T55Ni7Cr4Mo5V1

STF4

4ChMNFS

 

Ventura Alloy and Steels Stocks and Supplies Die Block Steels DB6 / 2714 in India and abroad. DB6 Steel is an extreme pass on steel with high treating resistance and great through-solidifying properties. Its nickel substance has it uncommonly effect safe – a highly recommendable element for vast mallet & press bites the dust alike. This evaluation is generally supplied in toughened condition or extinguished and tempered to 1300 N/mm² & a working hardness of 370 to 410 HB (round) or 355 to 400 HB (square, level).

Utilized as standard steel for manufacturing passes on of different kinds, press bites the dust, expulsion kicks the bucket, retainer plates, heavily clad trim bites the dust, hot shear sharpened pieces of steels and instrument holder.

 

Process Route:

Eaf+Lf+Vd+Upset+Forged+Annealed+Rough Turned For Rounds/Milled For Flats+Oil Quenched And Double Tempered+ Rough Turned For Rounds/Milled For Flats


Steel Properties:
The special Hot Work Pre-hardened Steel has great toughness and high wear resistance. DB6 Steel is generally supplied in hard, quenched, tempered and also in annealed condition in special cases. Usually it's working hardness is 360-430 BHN. This steel grade is the upgraded version of DIN 2713 for greater efficiency and performance.


Application:
Dies for Specially Drop and Close Die Forgings for Hammers & Mechanical Presses, Die Moulds, Shoe Blocks, Die Holder, Cassettes, Piston Rods, Cranks, Boaster, Shearing Blades, Tools, Plastic Moulds etc.

 

Yes! I am interested
Get CALLBACK

H12 Die Steel Block

H12 Die Steel Block
 
Get Best Quote
Approx. Rs 350 / Kg
Get Latest Price

Product Details:
Minimum Order Quantity200 Kg
ShapeRectangular
Usage/ApplicationAutomobile Industry
Thickness80 - 1000 mm
QuenchingOil or Hot Bath 500-550 Degree C
MaterialAlloy Steel
Soft annealing Degree C820
Coefficient of thermal expansionat Degree C20-500
Hardness HBMax 240
Hardening Degree C1030-1130
Hardness after quenching HRC57
CoolingFurnace

Chemical Composition - (Typical Analysis in %)

STANDARDS

X37CrMoW5-1

H12

DIN 2606

AISI H12

AFNOR 32CDV12-28

JIS SKD62


C

Si

Mn

P

S

Cr

W

Mo

V

0.30-0.40

0.80-1.25

0.20-0.60

0.003 max

0.030max

4.75-5.50

1.00-1.70

1.25-1.75

0.20-0.50


USA

Germany

Japan

British

AISI / SAE

DIN, WNr

JIS G4404

BS 4659

H12 / T20812

1.2605 / X35CrWMoV5

SKD62

BH12


H12 Hot Work Die Steel could be a five-hitter Cr, general hot work steel that is characterized by wonderful effect strength. It contains less vanadium than the broadly utilized H13 hot work tool steel, and furthermore the tungsten content gives higher temper resistance. It has smart resistance to thermal fatigue cracking (heat checking) and excellent resistance to gross cracking and thermal shock once water cooled in commission. TLS H12 hot work tool steel is normally prescribed for warm tooling applications wherever most resistance from cracking is required. Such applications grasp die casting, hot punches, hot shear cutting edges, shaping dies, extrusion tooling and hot gripper dies.


Steel Properties:

  • Magnificent Resistance to Wear

  • High Strength at Elevated Temperature

  • Homogenizing with High Toughness

  • Additional Fine Structure without Grain-Boundary Carbide


Physical Properties:

Coefficient of Thermal Expansion at °C

10¯??? m / (m*K)

20-100

11.7

20-250

12.4

20-500

12.9

 

Tempering°C after quenching

100

210

300

400

500

600

700

800

900

HRC

55

54

54.3

54.8


51

48

41

34


Price range: 350-750 per kg
Yes! I am interested
Get CALLBACK

SKD62 Die Steel Block

SKD62 Die Steel Block
 
Get Best Quote
Approx. Rs 350 / Kg
Get Latest Price

Product Details:
Minimum Order Quantity200 Kg
ShapeRectangular
Hardness HBMax 240
Hardening Degree C1030-1130
Hardness after quenching HRC57
CoolingFurnace
Soft annealing Degree C820
Coefficient of thermal expansionat Degree C20-500
QuenchingOil or Hot Bath 500-550 Degree C

Chemical Composition - (Typical Analysis in %)

STANDARDS

X37CrMoW5-1

H12

DIN 2606

AISI H12

AFNOR 32CDV12-28

JIS SKD62


C

Si

Mn

P

S

Cr

W

Mo

V

0.30-0.40

0.80-1.25

0.20-0.60

0.003 max

0.030max

4.75-5.50

1.00-1.70

1.25-1.75

0.20-0.50


USA

Germany

Japan

British

AISI / SAE

DIN, WNr

JIS G4404

BS 4659

H12 / T20812

1.2605 / X35CrWMoV5

SKD62

BH12


H12 Hot Work Die Steel could be a five-hitter Cr, general hot work steel that is characterized by wonderful effect strength. It contains less vanadium than the broadly utilized H13 hot work tool steel, and furthermore the tungsten content gives higher temper resistance. It has smart resistance to thermal fatigue cracking (heat checking) and excellent resistance to gross cracking and thermal shock once water cooled in commission. TLS H12 hot work tool steel is normally prescribed for warm tooling applications wherever most resistance from cracking is required. Such applications grasp die casting, hot punches, hot shear cutting edges, shaping dies, extrusion tooling and hot gripper dies.


Steel Properties:

  • Magnificent Resistance to Wear

  • High Strength at Elevated Temperature

  • Homogenizing with High Toughness

  • Additional Fine Structure without Grain-Boundary Carbide


Physical Properties:

Coefficient of Thermal Expansion at °C

10¯??? m / (m*K)

20-100

11.7

20-250

12.4

20-500

12.9

 

Tempering°C after quenching

100

210

300

400

500

600

700

800

900

HRC

55

54

54.3

54.8


51

48

41

34


Price range: 350-750 per kg
Yes! I am interested
Get CALLBACK

1.2344 Die Alloy Steel Block

1.2344 Die Alloy Steel Block
 
Get Best Quote
Approx. Rs 170 / Kg
Get Latest Price

Product Details:
Minimum Order Quantity200 Kg
ApplicationAutomobile Industry
MaterialAlloy Steel
Thickness20 to 400 mm
Hardness after quenching HRC55
Hardening Degree C1030-1060
CoolingFurnace
Soft annealing Degree C760 - 810
Thermal Conductivity Degree C20-700
Width40 to 700 mm
Hardness HBMax 240

We are offering 1.2344 Die Stainless Steel Block to our clients.

Chemical Composition - (Typical Analysis in %)

STANDARDS

X40CrMoV5

H13

DIN 2344

AISI H13

AFNOR Z40CDV5

JIS SKD61

 

C

Si

Mn

P

S

Cr

Mo

V

0.35-0.45

0.90-1.20

0.30-0.50

<0.03

<0.004

4.90-5.40

1.20-1.75

0.90-1.20


Ventura Alloy and Steels supplies and stocks H13 tool steel in flat, square and round bar. We provide steel in all sizes as your requirements. Consult our team who will assist you for any query related to H13 steel.


SAE AISI H13 steel equivalent with JIS SKD61, GB 4Cr5MoSiV1 and DIN 1.2344 Tool Steel. AISI H13 steel consists of chromium, molybdenum and vanadium and is known for its high hardenability and great toughness.


The molybdenum and vanadium act as strengthening agents while the chromium content helps the AISI H-13 tool steel to withstand softening when used at high temperatures. It also combines shock and abrasion resistance, has good red hardness, can resist rapid cooling and withstand premature heat checking.


H13 Tool Steel has high hot-wear resistance abilities along with great strength, heat conductivity and invulnerability to hot cracking. It has high-temperature strength and resistance to thermal fatigue, glorious through-hardening properties and shows very limited distortion during hardening.

 

H3 ESR is the most purified material with the conventional VD route. The nature of material increase the strength, exceptionally increase the micro-cleanness level. H13 ESR is most refined, has greater homogeneity and an exceptionally fine structure, resulting in improved machinability, polishing & high temperaturetensile strength. Exceptionally suggest the use of AISI-H13 ESR grade for Aluminum Pressure Die Casting and other part subjected to high working temperatures and high weight quality. H13 is completely ultrasonic examined with 100% positive outcomes according to NDT standards.

 

Steel Properties:

  • Great toughness
  • Thermal conductivity
  • High hot-wear resistance
  • Hot tensile strength
  • Insusceptible for hot cracking (Hot Crack resistant)
  • High Hardenability

 


Application:

This steel is especially used for ejector pins, tool holders and shrink work chucks. It is majorly widely utilized for manufacture of hot forging die & inserts, hot gripper dies, hot nut tools, hot header dies, brass forging and pressing dies, hot forging aluminum base dies, aluminum casting and extrusion dies, zinc die casting dies, extrusion mandrels, cores, die holder blocks, hot press dies, hot work punches, etc.

 

 

Yes! I am interested
Get CALLBACK

H13 Hot Work Steel Block

H13 Hot Work Steel Block
 
Get Best Quote
Approx. Rs 140 / Kg
Get Latest Price

Product Details:
Minimum Order Quantity200 Kg
Usage/ApplicationConstruction
ShapeRectangular
Thickness20 to 400 mm
CoolingFurnace
Hardness HBmax 240
Coefficient of thermal expansionat Degree C20-700 Deg C
Soft annealing Degree C760 - 810 Deg C
Hardness after quenching HRC55 HRC
Diameter40 to 700 mm
Thermal Conductivity Degree C20-700 Deg C
Hardening Degree C1030-1060 Deg C

We are offering H13 Hot Work Stainless Steel Blockto our clients.

Chemical Composition - (Typical Analysis in %)

STANDARDS

X40CrMoV5

H13

DIN 2344

AISI H13

AFNOR Z40CDV5

JIS SKD61

 

C

Si

Mn

P

S

Cr

Mo

V

0.35-0.45

0.90-1.20

0.30-0.50

<0.03

<0.004

4.90-5.40

1.20-1.75

0.90-1.20


Ventura Alloy and Steels supplies and stocks H13 tool steel in flat, square and round bar. We provide steel in all sizes as your requirements. Consult our team who will assist you for any query related to H13 steel.


SAE AISI H13 steel equivalent with JIS SKD61, GB 4Cr5MoSiV1 and DIN 1.2344 Tool Steel. AISI H13 steel consists of chromium, molybdenum and vanadium and is known for its high hardenability and great toughness.


It also combines shock and abrasion resistance, has good red hardness, can resist rapid cooling and withstand premature heat checking.


H13 Tool Steel has high hot-wear resistance abilities along with great strength, heat conductivity and invulnerability to hot cracking. It has good resistance to abrasion at each low and high temperature. It displays high level of toughness and ductility. H13 has Uniform and high level of machinability and polish ability. It has high-temperature strength and resistance to thermal fatigue, glorious through-hardening properties and shows very limited distortion during hardening.

 

H3 ESR is the most purified material with the conventional VD route. The nature of material increase the strength, exceptionally increase the micro-cleanness level. H13 ESR is most refined, has greater homogeneity and an exceptionally fine structure, resulting in improved machinability, polishing & high-temperature tensile strength. H13 is completely ultrasonic examined with 100% positive outcomes according to NDT standards.

 

Steel Properties:

  • Great toughness
  • Thermal conductivity
  • High hot-wear resistance
  • Hot tensile strength
  • Insusceptible for hot cracking (Hot Crack resistant)
  • Can be water-cooled to a restricted degree
  • High Hardenability


Application:

This steel is especially used for ejector pins, tool holders and shrink work chucks. It is majorly widely utilized for manufacture of hot forging die & inserts, hot gripper dies, hot nut tools, hot header dies, brass forging and pressing dies, hot forging aluminum base dies, aluminum casting and extrusion dies, zinc die casting dies, extrusion mandrels, cores, die holder blocks, hot press dies, hot work punches, etc.

 

Yes! I am interested
Get CALLBACK

1.2714 Hot Work Steel Block

1.2714 Hot Work Steel Block
 
Get Best Quote
Approx. Rs 150 / Kilogram
Get Latest Price

Product Details:
Minimum Order Quantity200 Kilogram
Usage/ApplicationConstruction
ShapeRectangular
TechniqueHot Rolled
Thickness125 to 1000 mm
Hardening Degree C840-900 Deg C
Width130 to 1600 mm
Soft annealing Degree C650-710 Deg C
Hardness HBMax 240
Hardness after quenching HRC55-57 HRC
Coefficient of thermal expansion at Degree C20-600 Deg C
CoolingFurnace
Thermal Conductivity at Degree C20-700 Deg C

We are offering 1.2714 Hot Work Stainless Steel Block to our clients.

Chemical Composition - (Typical Analysis in %)

STANDARDS

55NiCrMoV7

DB6

DIN 2714

AISI L6

AFNOR 55NCDVV7

JIS SKT4

 

C

Si

Mn

P

S

Cr

Ni

Mo

V

0.50-0.60

0.10-0.40

0.65-0.95

<0.015

<0.004

1.0-1.20

1.50-1.80

0.45-0.55

0.07-0.12

 

USA

Europe

Germany

China

Japan

India

R. of Korea

Russia

AISI / SAE

En

DIN, WNr

GB

JIS

IS

KS

GOST

A681 L6

55NiCrMoV7

56NiCrMoV7

5CrNiMo

SKT4

T55Ni7Cr4Mo5V1

STF4

4ChMNFS

 

Ventura Alloy and Steels Stocks and Supplies Die Block Steels DB6 / 2714 in India and abroad. DB6 Steel is an extreme pass on steel with high treating resistance and great through-solidifying properties. Its nickel substance has it uncommonly effect safe – a highly recommendable element for vast mallet & press bites the dust alike. This evaluation is generally supplied in toughened condition or extinguished and tempered to 1300 N/mm² & a working hardness of 370 to 410 HB (round) or 355 to 400 HB (square, level).


Utilized as standard steel for manufacturing passes on of different kinds, press bites the dust, expulsion kicks the bucket, retainer plates, heavily clad trim bites the dust, hot shear sharpened pieces of steels and instrument holder.


Process Route:

EAF+LF+VD+UPSET+FORGED+ANNEALED+ROUGH TURNED FOR ROUNDS/MILLED FOR FLATS+OIL QUENCHED AND DOUBLE TEMPERED+ROUGH TURNED FOR ROUNDS/MILLED FOR FLATS


Steel Properties:

The exceptional Hot Work Pre-solidified Steel has great toughness and high wear resistance. DB6 Steel is generally provided in hard, quenched, tempered and annealed condition in strengthened condition in exceptional cases. Normally it's working hardness is 360-430 BHN. This steel grade is the updated type of DIN 2713 for higher efficiency and performance.


Application:

Dies for Specially Drop and Close Die Forgings for Hammers & Mechanical Presses, Die Moulds, Shoe Blocks, Die Holder, Piston Rods, Bolster, Cranks, Cassettes, Plastic Moulds, Shearing Blades, Tools etc.

 

Yes! I am interested
Get CALLBACK

56NICRMOV7 Hot Work Steel Block

56NICRMOV7 Hot Work Steel Block
 
Get Best Quote
Approx. Rs 135 / Onwards
Get Latest Price

Product Details:
Minimum Order Quantity200 Onwards
Usage/ApplicationConstruction
ShapeRectangular
Thickness125 - 1000 mm
Coefficient of thermal expansionat Degree C20-700 Deg C
Hardening Degree C840-900 Deg C
CoolingFurnace
Thermal Conductivity Degree C20-700 Deg C
Soft annealing Degree C650-710 Deg C
Width130 to 1600 mm
Tempering Degree C100-600 Deg C
Hardness HBMax 240
Hardness after quenching HRC55-57 HRC

We are offering 56NICRMOV7 Hot Work Steel Block to our clients.

Chemical Composition - (Typical Analysis in %)

STANDARDS

55NiCrMoV7

DB6

DIN 2714

AISI L6

AFNOR 55NCDVV7

JIS SKT4

 

C

Si

Mn

P

S

Cr

Ni

Mo

V

0.50-0.60

0.10-0.40

0.65-0.95

<0.015

<0.004

1.0-1.20

1.50-1.80

0.45-0.55

0.07-0.12

 

USA

Europe

Germany

China

Japan

India

R. of Korea

Russia

AISI / SAE

En

DIN, WNr

GB

JIS

IS

KS

GOST

A681 L6

55NiCrMoV7

56NiCrMoV7

5CrNiMo

SKT4

T55Ni7Cr4Mo5V1

STF4

4ChMNFS

 

Ventura Alloy and Steels Stocks and Supplies Die Block Steels DB6 / 2714 in India and abroad. DB6 Steel is an extreme pass on steel with high treating resistance and great through-solidifying properties. Its nickel substance has it uncommonly effect safe – a highly recommendable element for vast mallet & press bites the dust alike. This evaluation is generally supplied in toughened condition or extinguished and tempered to 1300 N/mm² & a working hardness of 370 to 410 HB (round) or 355 to 400 HB (square, level).


Utilized as standard steel for manufacturing passes on of different kinds, press bites the dust, expulsion kicks the bucket, retainer plates, heavily clad trim bites the dust, hot shear sharpened pieces of steels and instrument holder.

 

Process Route:

Eaf+Lf+Vd+Upset+Forged+Annealed+Rough Turned For Rounds/Milled For Flats+Oil Quenched And Double Tempered+ Rough Turned For Rounds/Milled For Flats


Steel Properties:
The special Hot Work Pre-hardened Steel has great toughness and high wear resistance. DB6 Steel is generally supplied in hard, quenched, tempered and also in annealed condition in special cases. Usually it's working hardness is 360-430 BHN. This steel grade is the upgraded version of DIN 2713 for greater efficiency and performance.


Application:
Dies for Specially Drop and Close Die Forgings for Hammers & Mechanical Presses, Die Moulds, Shoe Blocks, Die Holder, Cassettes, Piston Rods, Cranks, Boaster, Shearing Blades, Tools, Plastic Moulds etc.


Yes! I am interested
Get CALLBACK

H13 Alloy Steel Block

H13 Alloy Steel Block
 
Get Best Quote
Approx. Rs 140 / Kilogram
Get Latest Price

Product Details:
Minimum Order Quantity200 Kilogram
ApplicationAutomobile Industry
ShapeRectangular
CoolingFurnace
Hardness after quenching HRC55
Thickness20 to 400 mm
Hardness HBmax 240
Thermal Conductivity Degree C20-700
Soft annealing Degree C760 - 810
Hardening Degree C1030-1060
Width40 to 700 mm

Chemical Composition - (Typical Analysis in %)

STANDARDS

X40CrMoV5

H13

DIN 2344

AISI H13

AFNOR Z40CDV5

JIS SKD61

 

C

Si

Mn

P

S

Cr

Mo

V

0.35-0.45

0.90-1.20

0.30-0.50

<0.03

<0.004

4.90-5.40

1.20-1.75

0.90-1.20


Ventura Alloy and Steels supplies and stocks H13 tool steel in flat, square and round bar. We provide steel in all sizes as your requirements. Consult our team who will assist you for any query related to H13 steel.


SAE AISI H13 steel equivalent with JIS SKD61, GB 4Cr5MoSiV1 and DIN 1.2344 Tool Steel. AISI H13 steel consists of chromium, molybdenum and vanadium and is known for its high hardenability and great toughness.


The molybdenum and vanadium act as strengthening agents while the chromium content helps the AISI H-13 tool steel to withstand softening when used at high temperatures. It also combines shock and abrasion resistance, has good red hardness, can resist rapid cooling and withstand premature heat checking.


H13 Tool Steel has high hot-wear resistance abilities along with great strength, heat conductivity and invulnerability to hot cracking. It has good resistance to abrasion at each low and high temperature. It displays high level of toughness and ductility. H13 has Uniform and high level of machinability and polish ability. It has high-temperature strength and resistance to thermal fatigue, glorious through-hardening properties and shows very limited distortion during hardening.

 

H3 ESR is the most purified material with the conventional VD route. The nature of material increase the strength, exceptionally increase the micro-cleanness level. H13 ESR is most refined, has greater homogeneity and an exceptionally fine structure, resulting in improved machinability, polishing & high temperature tensile strength. Exceptionally suggest the use of AISI-H13 ESR grade for Aluminum Pressure Die Casting and other part subjected to high working temperatures and high weight quality. H13 is completely ultrasonic examined with 100% positive outcomes according to NDT standards.

 

Steel Properties:

  • Great toughness

  • Thermal conductivity

  • High hot-wear resistance

  • Hot tensile strength

  • Insusceptible for hot cracking (Hot Crack resistant)

  • Can be water-cooled to a restricted degree

  • High Hardenability

Application:

This steel is especially used for ejector pins, tool holders and shrink work chucks. It is majorly widely utilized for manufacture of hot forging die & inserts, hot gripper dies, hot nut tools, hot header dies, brass forging and pressing dies, hot forging aluminum base dies, aluminum casting and extrusion dies, zinc die casting dies, extrusion mandrels, cores, die holder blocks, hot press dies, hot work punches, etc.

Yes! I am interested
Get CALLBACK

55NICRMOV7 Hot Work Steel Block

55NICRMOV7 Hot Work Steel Block
 
Get Best Quote
Approx. Rs 150 / Kg
Get Latest Price

Product Details:
Minimum Order Quantity200 Kg
Usage/ApplicationConstruction
ShapeRectangular
Thickness125 - 1000 mm
Width130 to 1600 mm
Coefficient of thermal expansion at Degree C200-600 Deg C
Thermal Conductivity Degree C20-700 Deg C
Soft annealing Degree C650-710 Deg C
Hardening Degree C840-900 Deg C
Hardness after quenching HRC55-57 HRC
Hardness HBMax 240
CoolingFurnace

We are offering 55NICRMOV7 Hot Work Steel Block to our clients.

Chemical Composition - (Typical Analysis in %)

STANDARDS

55NiCrMoV7

DB6

DIN 2714

AISI L6

AFNOR 55NCDVV7

JIS SKT4

 

C

Si

Mn

P

S

Cr

Ni

Mo

V

0.50-0.60

0.10-0.40

0.65-0.95

<0.015

<0.004

1.0-1.20

1.50-1.80

0.45-0.55

0.07-0.12

 

USA

Europe

Germany

China

Japan

India

R. of Korea

Russia

AISI / SAE

En

DIN, WNr

GB

JIS

IS

KS

GOST

A681 L6

55NiCrMoV7

56NiCrMoV7

5CrNiMo

SKT4

T55Ni7Cr4Mo5V1

STF4

4ChMNFS

 

Ventura Alloy and Steels Stocks and Supplies Die Block Steels DB6 / 2714 in India and abroad. DB6 Steel is an extreme pass on steel with high treating resistance and great through-solidifying properties. Its nickel substance has it uncommonly effect safe – a highly recommendable element for vast mallet & press bites the dust alike. This evaluation is generally supplied in toughened condition or extinguished and tempered to 1300 N/mm² & a working hardness of 370 to 410 HB (round) or 355 to 400 HB (square, level).

Utilized as standard steel for manufacturing passes on of different kinds, press bites the dust, expulsion kicks the bucket, retainer plates, heavily clad trim bites the dust, hot shear sharpened pieces of steels and instrument holder.

 

Process Route:

Eaf+Lf+Vd+Upset+Forged+Annealed+Rough Turned For Rounds/Milled For Flats+Oil Quenched And Double Tempered+ Rough Turned For Rounds/Milled For Flats


Steel Properties:
The special Hot Work Pre-hardened Steel has great toughness and high wear resistance. DB6 Steel is generally supplied in hard, quenched, tempered and also in annealed condition in special cases. Usually it's working hardness is 360-430 BHN. This steel grade is the upgraded version of DIN 2713 for greater efficiency and performance.


Application:
Dies for Specially Drop and Close Die Forgings for Hammers & Mechanical Presses, Die Moulds, Shoe Blocks, Die Holder, Cassettes, Piston Rods, Cranks, Boaster, Shearing Blades, Tools, Plastic Moulds etc.


Yes! I am interested
Explore More Products
X
Find UsAashish Shah (Chairman & Managing Director) Ventura Alloy And Steels Private Limited
Unit No.1201 & 1202, Ghanshyam Enclave P. Co-Op, Soc. Ltd., New Link Road, Kandivali West, Mumbai - 400067, Maharashtra, India
SEND SMS
SEND E-MAIL
Share Us: