Send SMS
Send E-mail

New Items

Get CALLBACK

2344 Die Block Steel

2344 Die Block Steel
 
Get Best Quote
Approx. Rs 170 / KilogramGet Latest Price

Product Details:
Minimum Order Quantity200 Kilogram
ApplicationAutomobile Industry
Hardness HBmax 240
Hardening Degree C1030-1060
Hardness after quenching HRC55
CoolingFurnace
Soft annealing Degree C760 - 810
ShapeRounds, Flats
Thermal Conductivity Degree C20-700

Chemical Composition - (Typical Analysis in %)

STANDARDSX40CrMoV5H13DIN 2344AISI H13AFNOR Z40CDV5JIS SKD61
 
CSiMnPSCrMoV
0.35-0.450.90-1.200.30-0.50<0.03<0.0044.90-5.401.20-1.750.90-1.20

Ventura Alloy and Steels supplies and stocks H13 tool steel in flat, square and round bar. We provide steel in all sizes as your requirements. Consult our team who will assist you for any query related to H13 steel.
SAE AISI H13 steel equivalent with JIS SKD61, GB 4Cr5MoSiV1 and DIN 1.2344 Tool Steel. AISI H13 steel consists of chromium, molybdenum and vanadium and is known for its high hardenability and great toughness.
The molybdenum and vanadium act as strengthening agents while the chromium content helps the AISI H-13 tool steel to withstand softening when used at high temperatures. It also combines shock and abrasion resistance, has good red hardness, can resist rapid cooling and withstand premature heat checking.
H13 Tool Steel has high hot-wear resistance abilities along with great strength, heat conductivity and invulnerability to hot cracking. It has good resistance to abrasion at each low and high temperature. It displays high level of toughness and ductility. H13 has Uniform and high level of machinability and polish ability. It has high-temperature strength and resistance to thermal fatigue, glorious through-hardening properties and shows very limited distortion during hardening. H3 ESR is the most purified material with the conventional VD route. The nature of material increase the strength, exceptionally increase the micro-cleanness level. H13 ESR is most refined, has greater homogeneity and an exceptionally fine structure, resulting in improved machinability, polishing & high temperature tensile strength. Exceptionally suggest the use of AISI-H13 ESR grade for Aluminum Pressure Die Casting and other part subjected to high working temperatures and high weight quality. H13 is completely ultrasonic examined with 100% positive outcomes according to NDT standards. STEEL PROPERTIES
  • Great toughness
  • Thermal conductivity
  • High hot-wear resistance
  • Hot tensile strength
  • Insusceptible for hot cracking (Hot Crack resistant)
  • Can be water-cooled to a restricted degree
  • High Hardenability

APPLICATIONThis steel is especially used for ejector pins, tool holders and shrink work chucks. It is majorly widely utilized for manufacture of hot forging die & inserts, hot gripper dies, hot nut tools, hot header dies, brass forging and pressing dies, hot forging aluminum base dies, aluminum casting and extrusion dies, zinc die casting dies, extrusion mandrels, cores, die holder blocks, hot press dies, hot work punches, etc.

SIZE RANGEROUNDS - 10 to 500 MM DIAFLATS - Thickness - 20 to 400 MM MAX | Width - 40 to 700 MM MAX

PRICE RANGE - Rs.150 to 230 per Kg
STOCKING PARTNERS
We keep the materials from Germany and China.
Yes! I am interested
Get CALLBACK

2344 Tool Steel

2344 Tool Steel
 
Get Best Quote
Approx. Rs 170 / KilogramGet Latest Price

Product Details:
Minimum Order Quantity200 Kilogram
ShapeRounds, Flats
ApplicationAutomobile Industry
Hardness HBmax 240
Hardening Degree C1030-1060
Soft annealing Degree C760 - 810
CoolingFurnace
Thermal Conductivity Degree C20-700

Chemical Composition - (Typical Analysis in %)

STANDARDSX40CrMoV5H13DIN 2344AISI H13AFNOR Z40CDV5JIS SKD61
 
CSiMnPSCrMoV
0.35-0.450.90-1.200.30-0.50<0.03<0.0044.90-5.401.20-1.750.90-1.20

Ventura Alloy and Steels supplies and stocks H13 tool steel in flat, square and round bar. We provide steel in all sizes as your requirements. Consult our team who will assist you for any query related to H13 steel.
SAE AISI H13 steel equivalent with JIS SKD61, GB 4Cr5MoSiV1 and DIN 1.2344 Tool Steel. AISI H13 steel consists of chromium, molybdenum and vanadium and is known for its high hardenability and great toughness.
The molybdenum and vanadium act as strengthening agents while the chromium content helps the AISI H-13 tool steel to withstand softening when used at high temperatures. It also combines shock and abrasion resistance, has good red hardness, can resist rapid cooling and withstand premature heat checking.
H13 Tool Steel has high hot-wear resistance abilities along with great strength, heat conductivity and invulnerability to hot cracking. It has good resistance to abrasion at each low and high temperature. It displays high level of toughness and ductility. H13 has Uniform and high level of machinability and polish ability. It has high-temperature strength and resistance to thermal fatigue, glorious through-hardening properties and shows very limited distortion during hardening. H3 ESR is the most purified material with the conventional VD route. The nature of material increase the strength, exceptionally increase the micro-cleanness level. H13 ESR is most refined, has greater homogeneity and an exceptionally fine structure, resulting in improved machinability, polishing & high temperature tensile strength. Exceptionally suggest the use of AISI-H13 ESR grade for Aluminum Pressure Die Casting and other part subjected to high working temperatures and high weight quality. H13 is completely ultrasonic examined with 100% positive outcomes according to NDT standards. STEEL PROPERTIES
  • Great toughness
  • Thermal conductivity
  • High hot-wear resistance
  • Hot tensile strength
  • Insusceptible for hot cracking (Hot Crack resistant)
  • Can be water-cooled to a restricted degree
  • High Hardenability

APPLICATIONThis steel is especially used for ejector pins, tool holders and shrink work chucks. It is majorly widely utilized for manufacture of hot forging die & inserts, hot gripper dies, hot nut tools, hot header dies, brass forging and pressing dies, hot forging aluminum base dies, aluminum casting and extrusion dies, zinc die casting dies, extrusion mandrels, cores, die holder blocks, hot press dies, hot work punches, etc.

SIZE RANGEROUNDS - 10 to 500 MM DIAFLATS - Thickness - 20 to 400 MM MAX | Width - 40 to 700 MM MAX

PRICE RANGE - Rs.150 to 230 per Kg
STOCKING PARTNERS
We keep the materials from Germany and China.
Yes! I am interested
Get CALLBACK

4Cr5MoSiV1 Die Block Steel

4Cr5MoSiV1 Die Block Steel
 
Get Best Quote
Approx. Rs 170 / KilogramGet Latest Price

Product Details:
Minimum Order Quantity200 Kilogram
ApplicationAutomobile Industry
Hardness HBmax 240
Hardening Degree C1030-1060
Hardness after quenching HRC55
CoolingFurnace
Soft annealing Degree C760 - 810
ShapeRounds, Flats
Thermal Conductivity Degree C20-700

Chemical Composition - (Typical Analysis in %)

STANDARDSX40CrMoV5H13DIN 2344AISI H13AFNOR Z40CDV5JIS SKD61
 
CSiMnPSCrMoV
0.35-0.450.90-1.200.30-0.50<0.03<0.0044.90-5.401.20-1.750.90-1.20

Ventura Alloy and Steels supplies and stocks H13 tool steel in flat, square and round bar. We provide steel in all sizes as your requirements. Consult our team who will assist you for any query related to H13 steel.
SAE AISI H13 steel equivalent with JIS SKD61, GB 4Cr5MoSiV1 and DIN 1.2344 Tool Steel. AISI H13 steel consists of chromium, molybdenum and vanadium and is known for its high hardenability and great toughness.
The molybdenum and vanadium act as strengthening agents while the chromium content helps the AISI H-13 tool steel to withstand softening when used at high temperatures. It also combines shock and abrasion resistance, has good red hardness, can resist rapid cooling and withstand premature heat checking.
H13 Tool Steel has high hot-wear resistance abilities along with great strength, heat conductivity and invulnerability to hot cracking. It has good resistance to abrasion at each low and high temperature. It displays high level of toughness and ductility. H13 has Uniform and high level of machinability and polish ability. It has high-temperature strength and resistance to thermal fatigue, glorious through-hardening properties and shows very limited distortion during hardening. H3 ESR is the most purified material with the conventional VD route. The nature of material increase the strength, exceptionally increase the micro-cleanness level. H13 ESR is most refined, has greater homogeneity and an exceptionally fine structure, resulting in improved machinability, polishing & high temperature tensile strength. Exceptionally suggest the use of AISI-H13 ESR grade for Aluminum Pressure Die Casting and other part subjected to high working temperatures and high weight quality. H13 is completely ultrasonic examined with 100% positive outcomes according to NDT standards. STEEL PROPERTIES
  • Great toughness
  • Thermal conductivity
  • High hot-wear resistance
  • Hot tensile strength
  • Insusceptible for hot cracking (Hot Crack resistant)
  • Can be water-cooled to a restricted degree
  • High Hardenability

APPLICATIONThis steel is especially used for ejector pins, tool holders and shrink work chucks. It is majorly widely utilized for manufacture of hot forging die & inserts, hot gripper dies, hot nut tools, hot header dies, brass forging and pressing dies, hot forging aluminum base dies, aluminum casting and extrusion dies, zinc die casting dies, extrusion mandrels, cores, die holder blocks, hot press dies, hot work punches, etc.

SIZE RANGEROUNDS - 10 to 500 MM DIAFLATS - Thickness - 20 to 400 MM MAX | Width - 40 to 700 MM MAX

PRICE RANGE - Rs.150 to 230 per Kg
STOCKING PARTNERS
We keep the materials from Germany and China.
Yes! I am interested
Get CALLBACK

4Cr5MoSiV1 Die Steel

4Cr5MoSiV1 Die Steel
 
Get Best Quote
Approx. Rs 170 / KilogramGet Latest Price

Product Details:
Minimum Order Quantity200 Kilogram
ApplicationAutomobile Industry
ShapeRound, Flat
Hardness HBmax 240
Hardening Degree C1030-1060
Hardness after quenching HRC55
CoolingFurnace
Soft annealing Degree C760 - 810
Thermal Conductivity Degree C20-700

Chemical Composition - (Typical Analysis in %)

STANDARDSX40CrMoV5H13DIN 2344AISI H13AFNOR Z40CDV5JIS SKD61
 
CSiMnPSCrMoV
0.35-0.450.90-1.200.30-0.50<0.03<0.0044.90-5.401.20-1.750.90-1.20

Ventura Alloy and Steels supplies and stocks H13 tool steel in flat, square and round bar. We provide steel in all sizes as your requirements. Consult our team who will assist you for any query related to H13 steel.
SAE AISI H13 steel equivalent with JIS SKD61, GB 4Cr5MoSiV1 and DIN 1.2344 Tool Steel. AISI H13 steel consists of chromium, molybdenum and vanadium and is known for its high hardenability and great toughness.
The molybdenum and vanadium act as strengthening agents while the chromium content helps the AISI H-13 tool steel to withstand softening when used at high temperatures. It also combines shock and abrasion resistance, has good red hardness, can resist rapid cooling and withstand premature heat checking.
H13 Tool Steel has high hot-wear resistance abilities along with great strength, heat conductivity and invulnerability to hot cracking. It has good resistance to abrasion at each low and high temperature. It displays high level of toughness and ductility. H13 has Uniform and high level of machinability and polish ability. It has high-temperature strength and resistance to thermal fatigue, glorious through-hardening properties and shows very limited distortion during hardening. H3 ESR is the most purified material with the conventional VD route. The nature of material increase the strength, exceptionally increase the micro-cleanness level. H13 ESR is most refined, has greater homogeneity and an exceptionally fine structure, resulting in improved machinability, polishing & high temperature tensile strength. Exceptionally suggest the use of AISI-H13 ESR grade for Aluminum Pressure Die Casting and other part subjected to high working temperatures and high weight quality. H13 is completely ultrasonic examined with 100% positive outcomes according to NDT standards. STEEL PROPERTIES
  • Great toughness
  • Thermal conductivity
  • High hot-wear resistance
  • Hot tensile strength
  • Insusceptible for hot cracking (Hot Crack resistant)
  • Can be water-cooled to a restricted degree
  • High Hardenability

APPLICATIONThis steel is especially used for ejector pins, tool holders and shrink work chucks. It is majorly widely utilized for manufacture of hot forging die & inserts, hot gripper dies, hot nut tools, hot header dies, brass forging and pressing dies, hot forging aluminum base dies, aluminum casting and extrusion dies, zinc die casting dies, extrusion mandrels, cores, die holder blocks, hot press dies, hot work punches, etc.

SIZE RANGEROUNDS - 10 to 500 MM DIAFLATS - Thickness - 20 to 400 MM MAX | Width - 40 to 700 MM MAX

PRICE RANGE - Rs.150 to 230 per Kg
STOCKING PARTNERS
We keep the materials from Germany and China.
Yes! I am interested
Get CALLBACK

55NiCrMoV7 Die Steel

55NiCrMoV7 Die Steel
 
Get Best Quote
Approx. Rs 150 / KilogramGet Latest Price

Product Details:
Minimum Order Quantity200 Kilogram
ShapeRounds, Blocks
ApplicationAutomobile Industry
Hardness HBmax 240
Hardening Degree C840-900
Hardness after quenching HRC55-57
CoolingFurnace
Soft annealing Degree C650-710
Coefficient of thermal expansionat Degree C20-700

Chemical Composition - (Typical Analysis in %)

STANDARDS55NiCrMoV7DB6DIN 2714AISI L6AFNOR 55NCDVV7JIS SKT4
 
CSiMnPSCrNiMoV
0.50-0.600.10-0.400.65-0.95<0.015<0.0041.0-1.201.50-1.800.45-0.550.07-0.12
 
USAEuropeGermanyChinaJapanIndiaR. of KoreaRussia
AISI / SAEEnDIN, WNrGBJISISKSGOST
A681 L655NiCrMoV756NiCrMoV75CrNiMoSKT4T55Ni7Cr4Mo5V1STF44ChMNFS
 Ventura Alloy and Steels Stocks and Supplies Die Block Steels DB6 / 2714 in India and abroad. DB6 Steel is an extreme pass on steel with high treating resistance and great through-solidifying properties. Its nickel substance has it uncommonly effect safe – a highly recommendable element for vast mallet & press bites the dust alike. This evaluation is generally supplied in toughened condition or extinguished and tempered to 1300 N/mm² & a working hardness of 370 to 410 HB (round) or 355 to 400 HB (square, level).

Utilized as standard steel for manufacturing passes on of different kinds, press bites the dust, expulsion kicks the bucket, retainer plates, heavily clad trim bites the dust, hot shear sharpened pieces of steels and instrument holder.
PROCESS ROUTEEAF+LF+VD+UPSET+FORGED+ANNEALED+ROUGH TURNED FOR ROUNDS/MILLED FOR FLATS+OIL QUENCHED AND DOUBLE TEMPERED+ROUGH TURNED FOR ROUNDS/MILLED FOR FLATS
STEEL PROPERTIESThe exceptional Hot Work Pre-solidified Steel has great toughness and high wear resistance. DB6 Steel is generally provided in hard, quenched, tempered and annealed condition in strengthened condition in exceptional cases. Normally it's working hardness is 360-430 BHN. This steel grade is the updated type of DIN 2713 for higher efficiency and performance.
APPLICATIONDies for Specially Drop and Close Die Forgings for Hammers & Mechanical Presses, Die Moulds, Shoe Blocks, Die Holder, Piston Rods, Bolster, Cranks, Cassettes, Plastic Moulds, Shearing Blades, Tools etc.
SIZE RANGEROUNDS - 60 to 1000 MM DIABLOCKS - Thickness - 125 to 1000 MM MAX | Width - 130 to 1600 MM MAX

PRICE RANGE
ROUNDS - Rs.145 to 170 per Kg
BLOCKS - Rs.155 to 195 per Kg

STOCKING PARTNERS
We keep the materials from Germany, Japan and China.
Yes! I am interested
Get CALLBACK

55NiCrMoV7 Tool Steel

55NiCrMoV7 Tool Steel
 
Get Best Quote
Approx. Rs 150 / KilogramGet Latest Price

Product Details:
Minimum Order Quantity200 Kilogram
ApplicationConstruction
ShapeRounds, Blocks
Hardness HBmax 240
Hardening Degree C840-900
Hardness after quenching HRC55-57
CoolingFurnace
Soft annealing Degree C650-710
Coefficient of thermal expansionat Degree C20-700

Chemical Composition - (Typical Analysis in %)

STANDARDS55NiCrMoV7DB6DIN 2714AISI L6AFNOR 55NCDVV7JIS SKT4
 
CSiMnPSCrNiMoV
0.50-0.600.10-0.400.65-0.95<0.015<0.0041.0-1.201.50-1.800.45-0.550.07-0.12
 
USAEuropeGermanyChinaJapanIndiaR. of KoreaRussia
AISI / SAEEnDIN, WNrGBJISISKSGOST
A681 L655NiCrMoV756NiCrMoV75CrNiMoSKT4T55Ni7Cr4Mo5V1STF44ChMNFS
 Ventura Alloy and Steels Stocks and Supplies Die Block Steels DB6 / 2714 in India and abroad. DB6 Steel is an extreme pass on steel with high treating resistance and great through-solidifying properties. Its nickel substance has it uncommonly effect safe – a highly recommendable element for vast mallet & press bites the dust alike. This evaluation is generally supplied in toughened condition or extinguished and tempered to 1300 N/mm² & a working hardness of 370 to 410 HB (round) or 355 to 400 HB (square, level).

Utilized as standard steel for manufacturing passes on of different kinds, press bites the dust, expulsion kicks the bucket, retainer plates, heavily clad trim bites the dust, hot shear sharpened pieces of steels and instrument holder.
PROCESS ROUTEEAF+LF+VD+UPSET+FORGED+ANNEALED+ROUGH TURNED FOR ROUNDS/MILLED FOR FLATS+OIL QUENCHED AND DOUBLE TEMPERED+ROUGH TURNED FOR ROUNDS/MILLED FOR FLATS
STEEL PROPERTIESThe exceptional Hot Work Pre-solidified Steel has great toughness and high wear resistance. DB6 Steel is generally provided in hard, quenched, tempered and annealed condition in strengthened condition in exceptional cases. Normally it's working hardness is 360-430 BHN. This steel grade is the updated type of DIN 2713 for higher efficiency and performance.
APPLICATIONDies for Specially Drop and Close Die Forgings for Hammers & Mechanical Presses, Die Moulds, Shoe Blocks, Die Holder, Piston Rods, Bolster, Cranks, Cassettes, Plastic Moulds, Shearing Blades, Tools etc.
SIZE RANGEROUNDS - 60 to 1000 MM DIABLOCKS - Thickness - 125 to 1000 MM MAX | Width - 130 to 1600 MM MAX

PRICE RANGE
ROUNDS - Rs.145 to 170 per Kg
BLOCKS - Rs.155 to 195 per Kg

STOCKING PARTNERS
We keep the materials from Germany, Japan and China.
Yes! I am interested
Get CALLBACK

H11 Hot Die Steel

H11 Hot Die Steel
 
Get Best Quote
Approx. Rs 145 / KilogramGet Latest Price

Product Details:
Minimum Order Quantity200 Kilogram
ShapeRounds, Flats
ApplicationAutomobile Industry
Hardness HBMax 230
Hardening Degree C1000-1030
Hardness after quenching HRC54
CoolingFurnace

We are offering H11 Hot Die Steel to our clients.

Chemical Composition - (Typical Analysis in %)
STANDARDSX37CrMoV5H11DIN 2343AISI H11AFNOR Z38CDV5JIS SKD6

CSiMnPSCrMoV
0.33-0.410.80-1.000.25-0.500.003 max0.030max4.80-5.501.10-1.500.30-0.50

USAEuropeGermanyChinaJapanIndiaR. of KoreaRussia
AISI / SAEEnDIN, WNrGBJISISKSGOST
H11X37CrMoV5-1X38CrMoV5-14Cr5MoSiVSKD6XT35Cr5Mo1V3STD 64Ch5MFS

Ventura Alloy and Steels Supplies and Stocks AISI H11 tool steel is a 5% chromium hot work tool steel that is represented by its excellent impact toughness. Chromium hot-work tool steels are designated as group H steels according to the AISI classification system, and specified in ASTM A681 standard. The most commonly used chromium hot-work steels are H11 tool steel, H12 tool steel, and H13 steel, within the series from H1 to H19.
If we compare between H11 and H13, H11 tool steel consists of less vanadium than the commonly used H13 hot work tool steel. This gives H11 steels the higher toughness, with some reduction in wear resistance and tamper resistance. H11 how work steel also has super resistance to thermal fatigue cracking and superb resistance to gross cracking and thermal shock when water cooled in service.
H11 steel is inclusive of all hot work tool steel with excellent rigidity and durability along with great thermal conductivity and invulnerability to hot cracking and can be water cooled to a constrained degree. H11 is primarily used for apparatus holders , ejector pins and shrink fit chucks.Steel Properties:·         Contains 5% Chromium·         Greater strength·         High toughness·         Best thermal physical phenomenon·         Resistant to hot cracking·         Gives fundamental necessities to long tool life in press forging, die-casting, extrusion processes etc.
Application:
This grade isn't utilized for typical applications in the area of hot-work steels, yet additionally useful for tool holders, bridge kind tools, ejector pins, liner holders, hot work punches, forging dies, and shrink work chucks.
Size Range:
Rounds- 71 to 300 MM DIAFlats- Thickness - 20 to 400 MM MAX | Width - 40 to 700 MM MAX
Price Range:
Rs.130-180 per Kg 
Stocking Partners:

We keep the materials from China.
Yes! I am interested
Get CALLBACK

H13 Die Block Steel

H13 Die Block Steel
 
Get Best Quote
Approx. Rs 170 / KilogramGet Latest Price

Product Details:
Minimum Order Quantity200 Kilogram
ApplicationAutomobile Industry
ShapeRounds, Flats
Hardness HBmax 240
Hardening Degree C1030-1060
Hardness after quenching HRC55
CoolingFurnace
Soft annealing Degree C760 - 810
Thermal Conductivity Degree C20-700

Chemical Composition - (Typical Analysis in %)

STANDARDSX40CrMoV5H13DIN 2344AISI H13AFNOR Z40CDV5JIS SKD61
 
CSiMnPSCrMoV
0.35-0.450.90-1.200.30-0.50<0.03<0.0044.90-5.401.20-1.750.90-1.20

Ventura Alloy and Steels supplies and stocks H13 tool steel in flat, square and round bar. We provide steel in all sizes as your requirements. Consult our team who will assist you for any query related to H13 steel.
SAE AISI H13 steel equivalent with JIS SKD61, GB 4Cr5MoSiV1 and DIN 1.2344 Tool Steel. AISI H13 steel consists of chromium, molybdenum and vanadium and is known for its high hardenability and great toughness.
The molybdenum and vanadium act as strengthening agents while the chromium content helps the AISI H-13 tool steel to withstand softening when used at high temperatures. It also combines shock and abrasion resistance, has good red hardness, can resist rapid cooling and withstand premature heat checking.
H13 Tool Steel has high hot-wear resistance abilities along with great strength, heat conductivity and invulnerability to hot cracking. It has good resistance to abrasion at each low and high temperature. It displays high level of toughness and ductility. H13 has Uniform and high level of machinability and polish ability. It has high-temperature strength and resistance to thermal fatigue, glorious through-hardening properties and shows very limited distortion during hardening. H3 ESR is the most purified material with the conventional VD route. The nature of material increase the strength, exceptionally increase the micro-cleanness level. H13 ESR is most refined, has greater homogeneity and an exceptionally fine structure, resulting in improved machinability, polishing & high temperature tensile strength. Exceptionally suggest the use of AISI-H13 ESR grade for Aluminum Pressure Die Casting and other part subjected to high working temperatures and high weight quality. H13 is completely ultrasonic examined with 100% positive outcomes according to NDT standards. STEEL PROPERTIES
  • Great toughness
  • Thermal conductivity
  • High hot-wear resistance
  • Hot tensile strength
  • Insusceptible for hot cracking (Hot Crack resistant)
  • Can be water-cooled to a restricted degree
  • High Hardenability

APPLICATIONThis steel is especially used for ejector pins, tool holders and shrink work chucks. It is majorly widely utilized for manufacture of hot forging die & inserts, hot gripper dies, hot nut tools, hot header dies, brass forging and pressing dies, hot forging aluminum base dies, aluminum casting and extrusion dies, zinc die casting dies, extrusion mandrels, cores, die holder blocks, hot press dies, hot work punches, etc.

SIZE RANGEROUNDS - 10 to 500 MM DIAFLATS - Thickness - 20 to 400 MM MAX | Width - 40 to 700 MM MAX

PRICE RANGE - Rs.150 to 230 per Kg
STOCKING PARTNERS
We keep the materials from Germany and China.
Yes! I am interested
Get CALLBACK

H13 Die Steel

H13 Die Steel
 
Get Best Quote
Approx. Rs 170 / KilogramGet Latest Price

Product Details:
Minimum Order Quantity200 Kilogram
ApplicationAutomobile Industry
ShapeRound, Flat
Hardness HBmax 240
Hardening Degree C1030-1060
Hardness after quenching HRC55
CoolingFurnace
Soft annealing Degree C760 - 810
Thermal Conductivity Degree C20-700

Chemical Composition - (Typical Analysis in %)

STANDARDSX40CrMoV5H13DIN 2344AISI H13AFNOR Z40CDV5JIS SKD61
 
CSiMnPSCrMoV
0.35-0.450.90-1.200.30-0.50<0.03<0.0044.90-5.401.20-1.750.90-1.20

Ventura Alloy and Steels supplies and stocks H13 tool steel in flat, square and round bar. We provide steel in all sizes as your requirements. Consult our team who will assist you for any query related to H13 steel.
SAE AISI H13 steel equivalent with JIS SKD61, GB 4Cr5MoSiV1 and DIN 1.2344 Tool Steel. AISI H13 steel consists of chromium, molybdenum and vanadium and is known for its high hardenability and great toughness.
The molybdenum and vanadium act as strengthening agents while the chromium content helps the AISI H-13 tool steel to withstand softening when used at high temperatures. It also combines shock and abrasion resistance, has good red hardness, can resist rapid cooling and withstand premature heat checking.
H13 Tool Steel has high hot-wear resistance abilities along with great strength, heat conductivity and invulnerability to hot cracking. It has good resistance to abrasion at each low and high temperature. It displays high level of toughness and ductility. H13 has Uniform and high level of machinability and polish ability. It has high-temperature strength and resistance to thermal fatigue, glorious through-hardening properties and shows very limited distortion during hardening. H3 ESR is the most purified material with the conventional VD route. The nature of material increase the strength, exceptionally increase the micro-cleanness level. H13 ESR is most refined, has greater homogeneity and an exceptionally fine structure, resulting in improved machinability, polishing & high temperature tensile strength. Exceptionally suggest the use of AISI-H13 ESR grade for Aluminum Pressure Die Casting and other part subjected to high working temperatures and high weight quality. H13 is completely ultrasonic examined with 100% positive outcomes according to NDT standards. STEEL PROPERTIES
  • Great toughness
  • Thermal conductivity
  • High hot-wear resistance
  • Hot tensile strength
  • Insusceptible for hot cracking (Hot Crack resistant)
  • Can be water-cooled to a restricted degree
  • High Hardenability

APPLICATIONThis steel is especially used for ejector pins, tool holders and shrink work chucks. It is majorly widely utilized for manufacture of hot forging die & inserts, hot gripper dies, hot nut tools, hot header dies, brass forging and pressing dies, hot forging aluminum base dies, aluminum casting and extrusion dies, zinc die casting dies, extrusion mandrels, cores, die holder blocks, hot press dies, hot work punches, etc.

SIZE RANGEROUNDS - 10 to 500 MM DIAFLATS - Thickness - 20 to 400 MM MAX | Width - 40 to 700 MM MAX

PRICE RANGE - Rs.150 to 230 per Kg
STOCKING PARTNERS
We keep the materials from Germany and China.
Yes! I am interested
Get CALLBACK

H13 Tool Steel

H13 Tool Steel
 
Get Best Quote
Approx. Rs 170 / KilogramGet Latest Price

Product Details:
Minimum Order Quantity200 Kilogram
ShapeRounds, Flats
ApplicationAutomobile Industry
Hardness HBmax 240
Thermal Conductivity Degree C20-700
Soft annealing Degree C760 - 810
CoolingFurnace
Hardening Degree C1030-1060
Hardness after quenching HRC55

Chemical Composition - (Typical Analysis in %)

STANDARDSX40CrMoV5H13DIN 2344AISI H13AFNOR Z40CDV5JIS SKD61
 
CSiMnPSCrMoV
0.35-0.450.90-1.200.30-0.50<0.03<0.0044.90-5.401.20-1.750.90-1.20

Ventura Alloy and Steels supplies and stocks H13 tool steel in flat, square and round bar. We provide steel in all sizes as your requirements. Consult our team who will assist you for any query related to H13 steel.
SAE AISI H13 steel equivalent with JIS SKD61, GB 4Cr5MoSiV1 and DIN 1.2344 Tool Steel. AISI H13 steel consists of chromium, molybdenum and vanadium and is known for its high hardenability and great toughness.
The molybdenum and vanadium act as strengthening agents while the chromium content helps the AISI H-13 tool steel to withstand softening when used at high temperatures. It also combines shock and abrasion resistance, has good red hardness, can resist rapid cooling and withstand premature heat checking.
H13 Tool Steel has high hot-wear resistance abilities along with great strength, heat conductivity and invulnerability to hot cracking. It has good resistance to abrasion at each low and high temperature. It displays high level of toughness and ductility. H13 has Uniform and high level of machinability and polish ability. It has high-temperature strength and resistance to thermal fatigue, glorious through-hardening properties and shows very limited distortion during hardening. H3 ESR is the most purified material with the conventional VD route. The nature of material increase the strength, exceptionally increase the micro-cleanness level. H13 ESR is most refined, has greater homogeneity and an exceptionally fine structure, resulting in improved machinability, polishing & high temperature tensile strength. Exceptionally suggest the use of AISI-H13 ESR grade for Aluminum Pressure Die Casting and other part subjected to high working temperatures and high weight quality. H13 is completely ultrasonic examined with 100% positive outcomes according to NDT standards. STEEL PROPERTIES
  • Great toughness
  • Thermal conductivity
  • High hot-wear resistance
  • Hot tensile strength
  • Insusceptible for hot cracking (Hot Crack resistant)
  • Can be water-cooled to a restricted degree
  • High Hardenability

APPLICATIONThis steel is especially used for ejector pins, tool holders and shrink work chucks. It is majorly widely utilized for manufacture of hot forging die & inserts, hot gripper dies, hot nut tools, hot header dies, brass forging and pressing dies, hot forging aluminum base dies, aluminum casting and extrusion dies, zinc die casting dies, extrusion mandrels, cores, die holder blocks, hot press dies, hot work punches, etc.

SIZE RANGEROUNDS - 10 to 500 MM DIAFLATS - Thickness - 20 to 400 MM MAX | Width - 40 to 700 MM MAX

PRICE RANGE - Rs.150 to 230 per Kg
STOCKING PARTNERS
We keep the materials from Germany and China.
Yes! I am interested
Get CALLBACK

SKD6 Die Block Steel

SKD6 Die Block Steel
 
Get Best Quote
Approx. Rs 145 / KilogramGet Latest Price

Product Details:
Minimum Order Quantity200 Kilogram
ApplicationAutomobile Industry
Hardness HBmax 230
Hardening Degree C1000-1030
Hardness after quenching HRC54
CoolingFurnace
ShapeRounds, Flats

Chemical Composition - (Typical Analysis in %)
STANDARDSX37CrMoV5H11DIN 2343AISI H11AFNOR Z38CDV5JIS SKD6

CSiMnPSCrMoV
0.33-0.410.80-1.000.25-0.500.003 max0.030max4.80-5.501.10-1.500.30-0.50

USAEuropeGermanyChinaJapanIndiaR. of KoreaRussia
AISI / SAEEnDIN, WNrGBJISISKSGOST
H11X37CrMoV5-1X38CrMoV5-14Cr5MoSiVSKD6XT35Cr5Mo1V3STD 64Ch5MFS

Ventura Alloy and Steels Supplies and Stocks AISI H11 tool steel is a 5% chromium hot work tool steel that is represented by its excellent impact toughness. Chromium hot-work tool steels are designated as group H steels according to the AISI classification system, and specified in ASTM A681 standard. The most commonly used chromium hot-work steels are H11 tool steel, H12 tool steel, and H13 steel, within the series from H1 to H19.
If we compare between H11 and H13, H11 tool steel consists of less vanadium than the commonly used H13 hot work tool steel. This gives H11 steels the higher toughness, with some reduction in wear resistance and tamper resistance. H11 tool steel is a deep-hardening, air-hardening steel and H11 alloy steel could be deep hardened by heat treatment and air-quenching. That gives minimal size change during heat treatment. H11 how work steel also has super resistance to thermal fatigue cracking and superb resistance to gross cracking and thermal shock when water cooled in service.
H11 steel is inclusive of all hot work tool steel with excellent rigidity and durability along with great thermal conductivity and invulnerability to hot cracking and can be water cooled to a constrained degree. H11 is primarily used for apparatus holders , ejector pins and shrink fit chucks.
STEEL PROPERTIES
  • Contains 5% Chromium
  • Greater strength
  • High toughness
  • Best thermal physical phenomenon
  • Resistant to hot cracking
  • Gives fundamental necessities to long tool life in press forging, die-casting, extrusion processes etc.

APPLICATION
This grade isn't utilized for typical applications in the area of hot-work steels, yet additionally useful for tool holders, bridge kind tools, ejector pins, liner holders, hot work punches, forging dies, and shrink work chucks.
SIZE RANGE
ROUNDS - 71 to 300 MM DIAFLATS - Thickness - 20 to 400 MM MAX | Width - 40 to 700 MM MAX
PRICE RANGE -
 Rs.130-180 per Kg
STOCKING PARTNERS

We keep the materials from China.
Yes! I am interested
Get CALLBACK

SKD6 Die Steel

SKD6 Die Steel
 
Get Best Quote
Approx. Rs 145 / KilogramGet Latest Price

Product Details:
Minimum Order Quantity200 Kilogram
ApplicationAutomobile Industry
ShapeRound, Flat
Hardness HBmax 230
Hardening Degree C1000-1030
Hardness after quenching HRC54
CoolingFurnace

Chemical Composition - (Typical Analysis in %)
STANDARDSX37CrMoV5H11DIN 2343AISI H11AFNOR Z38CDV5JIS SKD6

CSiMnPSCrMoV
0.33-0.410.80-1.000.25-0.500.003 max0.030max4.80-5.501.10-1.500.30-0.50

USAEuropeGermanyChinaJapanIndiaR. of KoreaRussia
AISI / SAEEnDIN, WNrGBJISISKSGOST
H11X37CrMoV5-1X38CrMoV5-14Cr5MoSiVSKD6XT35Cr5Mo1V3STD 64Ch5MFS

Ventura Alloy and Steels Supplies and Stocks AISI H11 tool steel is a 5% chromium hot work tool steel that is represented by its excellent impact toughness. Chromium hot-work tool steels are designated as group H steels according to the AISI classification system, and specified in ASTM A681 standard. The most commonly used chromium hot-work steels are H11 tool steel, H12 tool steel, and H13 steel, within the series from H1 to H19.
If we compare between H11 and H13, H11 tool steel consists of less vanadium than the commonly used H13 hot work tool steel. This gives H11 steels the higher toughness, with some reduction in wear resistance and tamper resistance. H11 tool steel is a deep-hardening, air-hardening steel and H11 alloy steel could be deep hardened by heat treatment and air-quenching. That gives minimal size change during heat treatment. H11 how work steel also has super resistance to thermal fatigue cracking and superb resistance to gross cracking and thermal shock when water cooled in service.
H11 steel is inclusive of all hot work tool steel with excellent rigidity and durability along with great thermal conductivity and invulnerability to hot cracking and can be water cooled to a constrained degree. H11 is primarily used for apparatus holders , ejector pins and shrink fit chucks.
STEEL PROPERTIES
  • Contains 5% Chromium
  • Greater strength
  • High toughness
  • Best thermal physical phenomenon
  • Resistant to hot cracking
  • Gives fundamental necessities to long tool life in press forging, die-casting, extrusion processes etc.

APPLICATION
This grade isn't utilized for typical applications in the area of hot-work steels, yet additionally useful for tool holders, bridge kind tools, ejector pins, liner holders, hot work punches, forging dies, and shrink work chucks.
SIZE RANGE
ROUNDS - 71 to 300 MM DIAFLATS - Thickness - 20 to 400 MM MAX | Width - 40 to 700 MM MAX
PRICE RANGE -
 Rs.130-180 per Kg
STOCKING PARTNERS

We keep the materials from China.
Yes! I am interested
Get CALLBACK

SKD61 Die Block Steel

SKD61 Die Block Steel
 
Get Best Quote
Approx. Rs 170 / KilogramGet Latest Price

Product Details:
Minimum Order Quantity200 Kilogram
ShapeRounds, Flats
Hardness HBmax 240
Hardening Degree C1030-1060
Hardness after quenching HRC55
CoolingFurnace
Soft annealing Degree C760 - 810
Thermal Conductivity Degree C20-700

Chemical Composition - (Typical Analysis in %)

STANDARDSX40CrMoV5H13DIN 2344AISI H13AFNOR Z40CDV5JIS SKD61
 
CSiMnPSCrMoV
0.35-0.450.90-1.200.30-0.50<0.03<0.0044.90-5.401.20-1.750.90-1.20

Ventura Alloy and Steels supplies and stocks H13 tool steel in flat, square and round bar. We provide steel in all sizes as your requirements. Consult our team who will assist you for any query related to H13 steel.
SAE AISI H13 steel equivalent with JIS SKD61, GB 4Cr5MoSiV1 and DIN 1.2344 Tool Steel. AISI H13 steel consists of chromium, molybdenum and vanadium and is known for its high hardenability and great toughness.
The molybdenum and vanadium act as strengthening agents while the chromium content helps the AISI H-13 tool steel to withstand softening when used at high temperatures. It also combines shock and abrasion resistance, has good red hardness, can resist rapid cooling and withstand premature heat checking.
H13 Tool Steel has high hot-wear resistance abilities along with great strength, heat conductivity and invulnerability to hot cracking. It has good resistance to abrasion at each low and high temperature. It displays high level of toughness and ductility. H13 has Uniform and high level of machinability and polish ability. It has high-temperature strength and resistance to thermal fatigue, glorious through-hardening properties and shows very limited distortion during hardening. H3 ESR is the most purified material with the conventional VD route. The nature of material increase the strength, exceptionally increase the micro-cleanness level. H13 ESR is most refined, has greater homogeneity and an exceptionally fine structure, resulting in improved machinability, polishing & high temperature tensile strength. Exceptionally suggest the use of AISI-H13 ESR grade for Aluminum Pressure Die Casting and other part subjected to high working temperatures and high weight quality. H13 is completely ultrasonic examined with 100% positive outcomes according to NDT standards. STEEL PROPERTIES
  • Great toughness
  • Thermal conductivity
  • High hot-wear resistance
  • Hot tensile strength
  • Insusceptible for hot cracking (Hot Crack resistant)
  • Can be water-cooled to a restricted degree
  • High Hardenability

APPLICATIONThis steel is especially used for ejector pins, tool holders and shrink work chucks. It is majorly widely utilized for manufacture of hot forging die & inserts, hot gripper dies, hot nut tools, hot header dies, brass forging and pressing dies, hot forging aluminum base dies, aluminum casting and extrusion dies, zinc die casting dies, extrusion mandrels, cores, die holder blocks, hot press dies, hot work punches, etc.

SIZE RANGEROUNDS - 10 to 500 MM DIAFLATS - Thickness - 20 to 400 MM MAX | Width - 40 to 700 MM MAX

PRICE RANGE - Rs.150 to 230 per Kg
STOCKING PARTNERS
We keep the materials from Germany and China.
Yes! I am interested
Get CALLBACK

SKD61 Tool Steel

SKD61 Tool Steel
 
Get Best Quote
Approx. Rs 170 / KilogramGet Latest Price

Product Details:
Minimum Order Quantity200 Kilogram
ShapeRounds, Flats
Hardness HBmax 240
Hardening Degree C1030-1060
Hardness after quenching HRC55
CoolingFurnace
Soft annealing Degree C760 - 810
Thermal Conductivity Degree C20-700

Chemical Composition - (Typical Analysis in %)

STANDARDSX40CrMoV5H13DIN 2344AISI H13AFNOR Z40CDV5JIS SKD61
 
CSiMnPSCrMoV
0.35-0.450.90-1.200.30-0.50<0.03<0.0044.90-5.401.20-1.750.90-1.20

Ventura Alloy and Steels supplies and stocks H13 tool steel in flat, square and round bar. We provide steel in all sizes as your requirements. Consult our team who will assist you for any query related to H13 steel.
SAE AISI H13 steel equivalent with JIS SKD61, GB 4Cr5MoSiV1 and DIN 1.2344 Tool Steel. AISI H13 steel consists of chromium, molybdenum and vanadium and is known for its high hardenability and great toughness.
The molybdenum and vanadium act as strengthening agents while the chromium content helps the AISI H-13 tool steel to withstand softening when used at high temperatures. It also combines shock and abrasion resistance, has good red hardness, can resist rapid cooling and withstand premature heat checking.
H13 Tool Steel has high hot-wear resistance abilities along with great strength, heat conductivity and invulnerability to hot cracking. It has good resistance to abrasion at each low and high temperature. It displays high level of toughness and ductility. H13 has Uniform and high level of machinability and polish ability. It has high-temperature strength and resistance to thermal fatigue, glorious through-hardening properties and shows very limited distortion during hardening. H3 ESR is the most purified material with the conventional VD route. The nature of material increase the strength, exceptionally increase the micro-cleanness level. H13 ESR is most refined, has greater homogeneity and an exceptionally fine structure, resulting in improved machinability, polishing & high temperature tensile strength. Exceptionally suggest the use of AISI-H13 ESR grade for Aluminum Pressure Die Casting and other part subjected to high working temperatures and high weight quality. H13 is completely ultrasonic examined with 100% positive outcomes according to NDT standards. STEEL PROPERTIES
  • Great toughness
  • Thermal conductivity
  • High hot-wear resistance
  • Hot tensile strength
  • Insusceptible for hot cracking (Hot Crack resistant)
  • Can be water-cooled to a restricted degree
  • High Hardenability

APPLICATIONThis steel is especially used for ejector pins, tool holders and shrink work chucks. It is majorly widely utilized for manufacture of hot forging die & inserts, hot gripper dies, hot nut tools, hot header dies, brass forging and pressing dies, hot forging aluminum base dies, aluminum casting and extrusion dies, zinc die casting dies, extrusion mandrels, cores, die holder blocks, hot press dies, hot work punches, etc.

SIZE RANGEROUNDS - 10 to 500 MM DIAFLATS - Thickness - 20 to 400 MM MAX | Width - 40 to 700 MM MAX

PRICE RANGE - Rs.150 to 230 per Kg
STOCKING PARTNERS
We keep the materials from Germany and China.
Yes! I am interested
Get CALLBACK

SKT4 Die Steel

SKT4 Die Steel
 
Get Best Quote
Approx. Rs 150 / KilogramGet Latest Price

Product Details:
Minimum Order Quantity200 Kilogram
ShapeRounds, Blocks
ApplicationConstruction
Hardness HBmax 240
Hardening Degree C840-900
Hardness after quenching HRC55-57
CoolingFurnace
Soft annealing Degree C650-710
Coefficient of thermal expansionat Degree C20-700

Chemical Composition - (Typical Analysis in %)

STANDARDS55NiCrMoV7DB6DIN 2714AISI L6AFNOR 55NCDVV7JIS SKT4
 
CSiMnPSCrNiMoV
0.50-0.600.10-0.400.65-0.95<0.015<0.0041.0-1.201.50-1.800.45-0.550.07-0.12
 
USAEuropeGermanyChinaJapanIndiaR. of KoreaRussia
AISI / SAEEnDIN, WNrGBJISISKSGOST
A681 L655NiCrMoV756NiCrMoV75CrNiMoSKT4T55Ni7Cr4Mo5V1STF44ChMNFS
 Ventura Alloy and Steels Stocks and Supplies Die Block Steels DB6 / 2714 in India and abroad. DB6 Steel is an extreme pass on steel with high treating resistance and great through-solidifying properties. Its nickel substance has it uncommonly effect safe – a highly recommendable element for vast mallet & press bites the dust alike. This evaluation is generally supplied in toughened condition or extinguished and tempered to 1300 N/mm² & a working hardness of 370 to 410 HB (round) or 355 to 400 HB (square, level).

Utilized as standard steel for manufacturing passes on of different kinds, press bites the dust, expulsion kicks the bucket, retainer plates, heavily clad trim bites the dust, hot shear sharpened pieces of steels and instrument holder.
PROCESS ROUTEEAF+LF+VD+UPSET+FORGED+ANNEALED+ROUGH TURNED FOR ROUNDS/MILLED FOR FLATS+OIL QUENCHED AND DOUBLE TEMPERED+ROUGH TURNED FOR ROUNDS/MILLED FOR FLATS
STEEL PROPERTIESThe exceptional Hot Work Pre-solidified Steel has great toughness and high wear resistance. DB6 Steel is generally provided in hard, quenched, tempered and annealed condition in strengthened condition in exceptional cases. Normally it's working hardness is 360-430 BHN. This steel grade is the updated type of DIN 2713 for higher efficiency and performance.
APPLICATIONDies for Specially Drop and Close Die Forgings for Hammers & Mechanical Presses, Die Moulds, Shoe Blocks, Die Holder, Piston Rods, Bolster, Cranks, Cassettes, Plastic Moulds, Shearing Blades, Tools etc.
SIZE RANGEROUNDS - 60 to 1000 MM DIABLOCKS - Thickness - 125 to 1000 MM MAX | Width - 130 to 1600 MM MAX

PRICE RANGE
ROUNDS - Rs.145 to 170 per Kg
BLOCKS - Rs.155 to 195 per Kg

STOCKING PARTNERS
We keep the materials from Germany, Japan and China.
Yes! I am interested
Get CALLBACK

SKT4 Tool Steel

SKT4 Tool Steel
 
Get Best Quote
Approx. Rs 150 / KilogramGet Latest Price

Product Details:
Minimum Order Quantity200 Kilogram
ShapeRounds, Blocks
ApplicationConstruction
Hardness HBmax 240
Hardening Degree C840-900
Hardness after quenching HRC55-57
CoolingFurnace
Soft annealing Degree C650-710
Coefficient of thermal expansionat Degree C20-700

Chemical Composition - (Typical Analysis in %)

STANDARDS55NiCrMoV7DB6DIN 2714AISI L6AFNOR 55NCDVV7JIS SKT4
 
CSiMnPSCrNiMoV
0.50-0.600.10-0.400.65-0.95<0.015<0.0041.0-1.201.50-1.800.45-0.550.07-0.12
 
USAEuropeGermanyChinaJapanIndiaR. of KoreaRussia
AISI / SAEEnDIN, WNrGBJISISKSGOST
A681 L655NiCrMoV756NiCrMoV75CrNiMoSKT4T55Ni7Cr4Mo5V1STF44ChMNFS
 Ventura Alloy and Steels Stocks and Supplies Die Block Steels DB6 / 2714 in India and abroad. DB6 Steel is an extreme pass on steel with high treating resistance and great through-solidifying properties. Its nickel substance has it uncommonly effect safe – a highly recommendable element for vast mallet & press bites the dust alike. This evaluation is generally supplied in toughened condition or extinguished and tempered to 1300 N/mm² & a working hardness of 370 to 410 HB (round) or 355 to 400 HB (square, level).

Utilized as standard steel for manufacturing passes on of different kinds, press bites the dust, expulsion kicks the bucket, retainer plates, heavily clad trim bites the dust, hot shear sharpened pieces of steels and instrument holder.
PROCESS ROUTEEAF+LF+VD+UPSET+FORGED+ANNEALED+ROUGH TURNED FOR ROUNDS/MILLED FOR FLATS+OIL QUENCHED AND DOUBLE TEMPERED+ROUGH TURNED FOR ROUNDS/MILLED FOR FLATS
STEEL PROPERTIESThe exceptional Hot Work Pre-solidified Steel has great toughness and high wear resistance. DB6 Steel is generally provided in hard, quenched, tempered and annealed condition in strengthened condition in exceptional cases. Normally it's working hardness is 360-430 BHN. This steel grade is the updated type of DIN 2713 for higher efficiency and performance.
APPLICATIONDies for Specially Drop and Close Die Forgings for Hammers & Mechanical Presses, Die Moulds, Shoe Blocks, Die Holder, Piston Rods, Bolster, Cranks, Cassettes, Plastic Moulds, Shearing Blades, Tools etc.
SIZE RANGEROUNDS - 60 to 1000 MM DIABLOCKS - Thickness - 125 to 1000 MM MAX | Width - 130 to 1600 MM MAX

PRICE RANGE
ROUNDS - Rs.145 to 170 per Kg
BLOCKS - Rs.155 to 195 per Kg

STOCKING PARTNERS
We keep the materials from Germany, Japan and China.
Yes! I am interested
Get CALLBACK

X37CrMoV5-1 Die Block Steel

X37CrMoV5-1 Die Block Steel
 
Get Best Quote
Approx. Rs 145 / KilogramGet Latest Price

Product Details:
Minimum Order Quantity200 Kilogram
ApplicationAutomobile Industry
Hardness HBmax 230
Hardening Degree C1000-1030
Hardness after quenching HRC54
CoolingFurnace
ShapeRounds, Flats

Chemical Composition - (Typical Analysis in %)
STANDARDSX37CrMoV5H11DIN 2343AISI H11AFNOR Z38CDV5JIS SKD6

CSiMnPSCrMoV
0.33-0.410.80-1.000.25-0.500.003 max0.030max4.80-5.501.10-1.500.30-0.50

USAEuropeGermanyChinaJapanIndiaR. of KoreaRussia
AISI / SAEEnDIN, WNrGBJISISKSGOST
H11X37CrMoV5-1X38CrMoV5-14Cr5MoSiVSKD6XT35Cr5Mo1V3STD 64Ch5MFS

Ventura Alloy and Steels Supplies and Stocks AISI H11 tool steel is a 5% chromium hot work tool steel that is represented by its excellent impact toughness. Chromium hot-work tool steels are designated as group H steels according to the AISI classification system, and specified in ASTM A681 standard. The most commonly used chromium hot-work steels are H11 tool steel, H12 tool steel, and H13 steel, within the series from H1 to H19.
If we compare between H11 and H13, H11 tool steel consists of less vanadium than the commonly used H13 hot work tool steel. This gives H11 steels the higher toughness, with some reduction in wear resistance and tamper resistance. H11 tool steel is a deep-hardening, air-hardening steel and H11 alloy steel could be deep hardened by heat treatment and air-quenching. That gives minimal size change during heat treatment. H11 how work steel also has super resistance to thermal fatigue cracking and superb resistance to gross cracking and thermal shock when water cooled in service.
H11 steel is inclusive of all hot work tool steel with excellent rigidity and durability along with great thermal conductivity and invulnerability to hot cracking and can be water cooled to a constrained degree. H11 is primarily used for apparatus holders , ejector pins and shrink fit chucks.
STEEL PROPERTIES
  • Contains 5% Chromium
  • Greater strength
  • High toughness
  • Best thermal physical phenomenon
  • Resistant to hot cracking
  • Gives fundamental necessities to long tool life in press forging, die-casting, extrusion processes etc.

APPLICATION
This grade isn't utilized for typical applications in the area of hot-work steels, yet additionally useful for tool holders, bridge kind tools, ejector pins, liner holders, hot work punches, forging dies, and shrink work chucks.
SIZE RANGE
ROUNDS - 71 to 300 MM DIAFLATS - Thickness - 20 to 400 MM MAX | Width - 40 to 700 MM MAX
PRICE RANGE -
 Rs.130-180 per Kg
STOCKING PARTNERS

We keep the materials from China.
Yes! I am interested
Get CALLBACK

X37CrMoV5-1 Die Steel

X37CrMoV5-1 Die Steel
 
Get Best Quote
Approx. Rs 145 / KilogramGet Latest Price

Product Details:
Minimum Order Quantity200 Kilogram
ShapeRound, Flat
ApplicationAutomobile Industry
Hardness HBmax 230
Hardening Degree C1000-1030
Hardness after quenching HRC54
CoolingFurnace

Chemical Composition - (Typical Analysis in %)
STANDARDSX37CrMoV5H11DIN 2343AISI H11AFNOR Z38CDV5JIS SKD6

CSiMnPSCrMoV
0.33-0.410.80-1.000.25-0.500.003 max0.030max4.80-5.501.10-1.500.30-0.50

USAEuropeGermanyChinaJapanIndiaR. of KoreaRussia
AISI / SAEEnDIN, WNrGBJISISKSGOST
H11X37CrMoV5-1X38CrMoV5-14Cr5MoSiVSKD6XT35Cr5Mo1V3STD 64Ch5MFS

Ventura Alloy and Steels Supplies and Stocks AISI H11 tool steel is a 5% chromium hot work tool steel that is represented by its excellent impact toughness. Chromium hot-work tool steels are designated as group H steels according to the AISI classification system, and specified in ASTM A681 standard. The most commonly used chromium hot-work steels are H11 tool steel, H12 tool steel, and H13 steel, within the series from H1 to H19.
If we compare between H11 and H13, H11 tool steel consists of less vanadium than the commonly used H13 hot work tool steel. This gives H11 steels the higher toughness, with some reduction in wear resistance and tamper resistance. H11 tool steel is a deep-hardening, air-hardening steel and H11 alloy steel could be deep hardened by heat treatment and air-quenching. That gives minimal size change during heat treatment. H11 how work steel also has super resistance to thermal fatigue cracking and superb resistance to gross cracking and thermal shock when water cooled in service.
H11 steel is inclusive of all hot work tool steel with excellent rigidity and durability along with great thermal conductivity and invulnerability to hot cracking and can be water cooled to a constrained degree. H11 is primarily used for apparatus holders , ejector pins and shrink fit chucks.
STEEL PROPERTIES
  • Contains 5% Chromium
  • Greater strength
  • High toughness
  • Best thermal physical phenomenon
  • Resistant to hot cracking
  • Gives fundamental necessities to long tool life in press forging, die-casting, extrusion processes etc.

APPLICATION
This grade isn't utilized for typical applications in the area of hot-work steels, yet additionally useful for tool holders, bridge kind tools, ejector pins, liner holders, hot work punches, forging dies, and shrink work chucks.
SIZE RANGE
ROUNDS - 71 to 300 MM DIAFLATS - Thickness - 20 to 400 MM MAX | Width - 40 to 700 MM MAX
PRICE RANGE -
 Rs.130-180 per Kg
STOCKING PARTNERS

We keep the materials from China.
Yes! I am interested
Get CALLBACK

X38CrMoV5-1 Die Block Steel

X38CrMoV5-1 Die Block Steel
 
Get Best Quote
Approx. Rs 145 / KilogramGet Latest Price

Product Details:
Minimum Order Quantity200 Kilogram
ApplicationAutomobile Industry
Hardness HBmax 230
Hardening Degree C1000-1030
Hardness after quenching HRC54
CoolingFurnace
ShapeRounds, Flats

Chemical Composition - (Typical Analysis in %)
STANDARDSX37CrMoV5H11DIN 2343AISI H11AFNOR Z38CDV5JIS SKD6

CSiMnPSCrMoV
0.33-0.410.80-1.000.25-0.500.003 max0.030max4.80-5.501.10-1.500.30-0.50

USAEuropeGermanyChinaJapanIndiaR. of KoreaRussia
AISI / SAEEnDIN, WNrGBJISISKSGOST
H11X37CrMoV5-1X38CrMoV5-14Cr5MoSiVSKD6XT35Cr5Mo1V3STD 64Ch5MFS

Ventura Alloy and Steels Supplies and Stocks AISI H11 tool steel is a 5% chromium hot work tool steel that is represented by its excellent impact toughness. Chromium hot-work tool steels are designated as group H steels according to the AISI classification system, and specified in ASTM A681 standard. The most commonly used chromium hot-work steels are H11 tool steel, H12 tool steel, and H13 steel, within the series from H1 to H19.
If we compare between H11 and H13, H11 tool steel consists of less vanadium than the commonly used H13 hot work tool steel. This gives H11 steels the higher toughness, with some reduction in wear resistance and tamper resistance. H11 tool steel is a deep-hardening, air-hardening steel and H11 alloy steel could be deep hardened by heat treatment and air-quenching. That gives minimal size change during heat treatment. H11 how work steel also has super resistance to thermal fatigue cracking and superb resistance to gross cracking and thermal shock when water cooled in service.
H11 steel is inclusive of all hot work tool steel with excellent rigidity and durability along with great thermal conductivity and invulnerability to hot cracking and can be water cooled to a constrained degree. H11 is primarily used for apparatus holders , ejector pins and shrink fit chucks.
STEEL PROPERTIES
  • Contains 5% Chromium
  • Greater strength
  • High toughness
  • Best thermal physical phenomenon
  • Resistant to hot cracking
  • Gives fundamental necessities to long tool life in press forging, die-casting, extrusion processes etc.

APPLICATION
This grade isn't utilized for typical applications in the area of hot-work steels, yet additionally useful for tool holders, bridge kind tools, ejector pins, liner holders, hot work punches, forging dies, and shrink work chucks.
SIZE RANGE
ROUNDS - 71 to 300 MM DIAFLATS - Thickness - 20 to 400 MM MAX | Width - 40 to 700 MM MAX
PRICE RANGE -
 Rs.130-180 per Kg
STOCKING PARTNERS

We keep the materials from China.
Yes! I am interested
Get CALLBACK

X38CrMoV5-1 Die Steel

X38CrMoV5-1 Die Steel
 
Get Best Quote
Approx. Rs 145 / KilogramGet Latest Price

Product Details:
Minimum Order Quantity200 Kilogram
ApplicationAutomobile Industry
ShapeRound, Flat
Hardness HBmax 230
Hardening Degree C1000-1030
Hardness after quenching HRC54
CoolingFurnace

Chemical Composition - (Typical Analysis in %)
STANDARDSX37CrMoV5H11DIN 2343AISI H11AFNOR Z38CDV5JIS SKD6

CSiMnPSCrMoV
0.33-0.410.80-1.000.25-0.500.003 max0.030max4.80-5.501.10-1.500.30-0.50

USAEuropeGermanyChinaJapanIndiaR. of KoreaRussia
AISI / SAEEnDIN, WNrGBJISISKSGOST
H11X37CrMoV5-1X38CrMoV5-14Cr5MoSiVSKD6XT35Cr5Mo1V3STD 64Ch5MFS

Ventura Alloy and Steels Supplies and Stocks AISI H11 tool steel is a 5% chromium hot work tool steel that is represented by its excellent impact toughness. Chromium hot-work tool steels are designated as group H steels according to the AISI classification system, and specified in ASTM A681 standard. The most commonly used chromium hot-work steels are H11 tool steel, H12 tool steel, and H13 steel, within the series from H1 to H19.
If we compare between H11 and H13, H11 tool steel consists of less vanadium than the commonly used H13 hot work tool steel. This gives H11 steels the higher toughness, with some reduction in wear resistance and tamper resistance. H11 tool steel is a deep-hardening, air-hardening steel and H11 alloy steel could be deep hardened by heat treatment and air-quenching. That gives minimal size change during heat treatment. H11 how work steel also has super resistance to thermal fatigue cracking and superb resistance to gross cracking and thermal shock when water cooled in service.
H11 steel is inclusive of all hot work tool steel with excellent rigidity and durability along with great thermal conductivity and invulnerability to hot cracking and can be water cooled to a constrained degree. H11 is primarily used for apparatus holders , ejector pins and shrink fit chucks.
STEEL PROPERTIES
  • Contains 5% Chromium
  • Greater strength
  • High toughness
  • Best thermal physical phenomenon
  • Resistant to hot cracking
  • Gives fundamental necessities to long tool life in press forging, die-casting, extrusion processes etc.

APPLICATION
This grade isn't utilized for typical applications in the area of hot-work steels, yet additionally useful for tool holders, bridge kind tools, ejector pins, liner holders, hot work punches, forging dies, and shrink work chucks.
SIZE RANGE
ROUNDS - 71 to 300 MM DIAFLATS - Thickness - 20 to 400 MM MAX | Width - 40 to 700 MM MAX
PRICE RANGE -
 Rs.130-180 per Kg
STOCKING PARTNERS

We keep the materials from China.
Yes! I am interested
Get CALLBACK

X40CrMoV5-1 Die Block Steel

X40CrMoV5-1 Die Block Steel
 
Get Best Quote
Approx. Rs 170 / KilogramGet Latest Price

Product Details:
Minimum Order Quantity200 Kilogram
ApplicationAutomobile Industry
ShapeRounds, Flats
Hardness HBmax 240
Hardening Degree C1030-1060
Hardness after quenching HRC55
CoolingFurnace
Soft annealing Degree C760 - 810
Thermal Conductivity Degree C20-700

Chemical Composition - (Typical Analysis in %)

STANDARDSX40CrMoV5H13DIN 2344AISI H13AFNOR Z40CDV5JIS SKD61
 
CSiMnPSCrMoV
0.35-0.450.90-1.200.30-0.50<0.03<0.0044.90-5.401.20-1.750.90-1.20

Ventura Alloy and Steels supplies and stocks H13 tool steel in flat, square and round bar. We provide steel in all sizes as your requirements. Consult our team who will assist you for any query related to H13 steel.
SAE AISI H13 steel equivalent with JIS SKD61, GB 4Cr5MoSiV1 and DIN 1.2344 Tool Steel. AISI H13 steel consists of chromium, molybdenum and vanadium and is known for its high hardenability and great toughness.
The molybdenum and vanadium act as strengthening agents while the chromium content helps the AISI H-13 tool steel to withstand softening when used at high temperatures. It also combines shock and abrasion resistance, has good red hardness, can resist rapid cooling and withstand premature heat checking.
H13 Tool Steel has high hot-wear resistance abilities along with great strength, heat conductivity and invulnerability to hot cracking. It has good resistance to abrasion at each low and high temperature. It displays high level of toughness and ductility. H13 has Uniform and high level of machinability and polish ability. It has high-temperature strength and resistance to thermal fatigue, glorious through-hardening properties and shows very limited distortion during hardening. H3 ESR is the most purified material with the conventional VD route. The nature of material increase the strength, exceptionally increase the micro-cleanness level. H13 ESR is most refined, has greater homogeneity and an exceptionally fine structure, resulting in improved machinability, polishing & high temperature tensile strength. Exceptionally suggest the use of AISI-H13 ESR grade for Aluminum Pressure Die Casting and other part subjected to high working temperatures and high weight quality. H13 is completely ultrasonic examined with 100% positive outcomes according to NDT standards. STEEL PROPERTIES
  • Great toughness
  • Thermal conductivity
  • High hot-wear resistance
  • Hot tensile strength
  • Insusceptible for hot cracking (Hot Crack resistant)
  • Can be water-cooled to a restricted degree
  • High Hardenability

APPLICATIONThis steel is especially used for ejector pins, tool holders and shrink work chucks. It is majorly widely utilized for manufacture of hot forging die & inserts, hot gripper dies, hot nut tools, hot header dies, brass forging and pressing dies, hot forging aluminum base dies, aluminum casting and extrusion dies, zinc die casting dies, extrusion mandrels, cores, die holder blocks, hot press dies, hot work punches, etc.

SIZE RANGEROUNDS - 10 to 500 MM DIAFLATS - Thickness - 20 to 400 MM MAX | Width - 40 to 700 MM MAX

PRICE RANGE - Rs.150 to 230 per Kg
STOCKING PARTNERS
We keep the materials from Germany and China.
Yes! I am interested
Get CALLBACK

X40CrMoV5-1 Hot Work Tool Steel

X40CrMoV5-1 Hot Work Tool Steel
 
Get Best Quote
Approx. Rs 170 / KilogramGet Latest Price

Product Details:
Minimum Order Quantity200 Kilogram
ApplicationAutomobile Industry
ShapeRounds, Flats
Hardness HBmax 240
Hardening Degree C1030-1060
Hardness after quenching HRC55
CoolingFurnace
Soft annealing Degree C760 - 810
Thermal Conductivity Degree C20-700

Chemical Composition - (Typical Analysis in %)

STANDARDSX40CrMoV5H13DIN 2344AISI H13AFNOR Z40CDV5JIS SKD61
 
CSiMnPSCrMoV
0.35-0.450.90-1.200.30-0.50<0.03<0.0044.90-5.401.20-1.750.90-1.20

Ventura Alloy and Steels supplies and stocks H13 tool steel in flat, square and round bar. We provide steel in all sizes as your requirements. Consult our team who will assist you for any query related to H13 steel.
SAE AISI H13 steel equivalent with JIS SKD61, GB 4Cr5MoSiV1 and DIN 1.2344 Tool Steel. AISI H13 steel consists of chromium, molybdenum and vanadium and is known for its high hardenability and great toughness.
The molybdenum and vanadium act as strengthening agents while the chromium content helps the AISI H-13 tool steel to withstand softening when used at high temperatures. It also combines shock and abrasion resistance, has good red hardness, can resist rapid cooling and withstand premature heat checking.
H13 Tool Steel has high hot-wear resistance abilities along with great strength, heat conductivity and invulnerability to hot cracking. It has good resistance to abrasion at each low and high temperature. It displays high level of toughness and ductility. H13 has Uniform and high level of machinability and polish ability. It has high-temperature strength and resistance to thermal fatigue, glorious through-hardening properties and shows very limited distortion during hardening. H3 ESR is the most purified material with the conventional VD route. The nature of material increase the strength, exceptionally increase the micro-cleanness level. H13 ESR is most refined, has greater homogeneity and an exceptionally fine structure, resulting in improved machinability, polishing & high temperature tensile strength. Exceptionally suggest the use of AISI-H13 ESR grade for Aluminum Pressure Die Casting and other part subjected to high working temperatures and high weight quality. H13 is completely ultrasonic examined with 100% positive outcomes according to NDT standards. STEEL PROPERTIES
  • Great toughness
  • Thermal conductivity
  • High hot-wear resistance
  • Hot tensile strength
  • Insusceptible for hot cracking (Hot Crack resistant)
  • Can be water-cooled to a restricted degree
  • High Hardenability

APPLICATIONThis steel is especially used for ejector pins, tool holders and shrink work chucks. It is majorly widely utilized for manufacture of hot forging die & inserts, hot gripper dies, hot nut tools, hot header dies, brass forging and pressing dies, hot forging aluminum base dies, aluminum casting and extrusion dies, zinc die casting dies, extrusion mandrels, cores, die holder blocks, hot press dies, hot work punches, etc.

SIZE RANGEROUNDS - 10 to 500 MM DIAFLATS - Thickness - 20 to 400 MM MAX | Width - 40 to 700 MM MAX

PRICE RANGE - Rs.150 to 230 per Kg
STOCKING PARTNERS
We keep the materials from Germany and China.
Yes! I am interested
Get CALLBACK

EN24 Alloy Steel Bar

EN24 Alloy Steel Bar
 
Ask For Price
Product Price:  Get Latest Price

Product Details:
Minimum Order Quantity200 Kilogram
ShapeRound
MaterialSS
Surface TreatmentPolished
ApplicationIndustrial
Thickness6 to 450 MM

As rolled and Spheroidized Annealed
StandardGradeCMnPSSiNiCrMo
ASTM A2943400.38-0.430.60-0.800.035 max0.040 max0.15-0.351.65-2.000.70-0.900.20-0.30
EN 1025036CrNiMo4 / 1.65110.32-0.400.50-0.800.035 max0.035 max0.40 max0.90-1.200.90-1.20.15-0.30
BS 970EN24 / 817M400.36-0.440.45-0.700.035 max0.040 max0.10-0.401.30-1.701.00-1.400.20-0.35
JIS G4103SNCM 439 / SNCM 80.36-0.430.60-0.900.035 max0.030 max0.15-0.351.60-2.000.60-1.000.15-0.30
EN24 steel is a medium carbon, low alloy steel known for its toughness and strength in generally large sections. EN24 is likewise one kind of nickel chromium molybdenum steels. It can be supplied hardened and tempered in the tensile range of 930-1080 Mpa as well as annealed condition. Pre hardened and tempered EN24 steels can be further surface hardened by flame or induction hardening and by nitriding. EN24 steel is high tensile alloy steel famous for its excellent wear resistance properties and in addition to where high strength properties are required. This Grade is used in components affiliated to shafts, gears, studs and bolts. Its hardness is within the range of 248~302 HB.STEEL PROPERTIES
  • Standard high-speed steel grade
  • Contains well-balanced alloy composition
  • High toughness
  • Great cutting edge retention
PHYSICAL PROPERTIES
Thermal Conductivity at °CW / (m*K)
2040.5
35032.5
70025.5
HEAT TREATMENT
Soft Annealing °C650-700
CoolingSlowly
Hardness HBmax. 280
Stress-relief Annealing °C630-650
CoolingFurnace

1st Pre-Heating °Cup to approx. 400 in an air-circulating furnace
2nd and 3rd780 and 1000
Hardening °C1190-1230
QuenchingSalt Bath, at least 520°C Oil, Air
Tempering °Cat least twice 530-560
Hardness after Temperature HRC64-66
SIZE RANGE
ROUNDS - 6 to 450 MM DIA.
SQUARES - 32 to 155 MM
FLATS - THICKNESS -15 to 105 MM | WIDTH -40 to 405 MM
Yes! I am interested
Get CALLBACK

40NiCrMo84 Alloy Steel

40NiCrMo84 Alloy Steel
 
Ask For Price
Product Price:  Get Latest Price

Product Details:
Minimum Order Quantity200 Kilogram
ApplicationIndustrial
Diameter6 to 450 MM DIA.
Surface TreatmentPolished
ShapeRound

As rolled and Spheroidized Annealed
StandardGradeCMnPSSiNiCrMo
ASTM A2943400.38-0.430.60-0.800.035 max0.040 max0.15-0.351.65-2.000.70-0.900.20-0.30
EN 1025036CrNiMo4 / 1.65110.32-0.400.50-0.800.035 max0.035 max0.40 max0.90-1.200.90-1.20.15-0.30
BS 970EN24 / 817M400.36-0.440.45-0.700.035 max0.040 max0.10-0.401.30-1.701.00-1.400.20-0.35
JIS G4103SNCM 439 / SNCM 80.36-0.430.60-0.900.035 max0.030 max0.15-0.351.60-2.000.60-1.000.15-0.30
EN24 steel is a medium carbon, low alloy steel known for its toughness and strength in generally large sections. EN24 is likewise one kind of nickel chromium molybdenum steels. It can be supplied hardened and tempered in the tensile range of 930-1080 Mpa as well as annealed condition. Pre hardened and tempered EN24 steels can be further surface hardened by flame or induction hardening and by nitriding. EN24 steel is high tensile alloy steel famous for its excellent wear resistance properties and in addition to where high strength properties are required. This Grade is used in components affiliated to shafts, gears, studs and bolts. Its hardness is within the range of 248~302 HB.STEEL PROPERTIES
  • Standard high-speed steel grade
  • Contains well-balanced alloy composition
  • High toughness
  • Great cutting edge retention
PHYSICAL PROPERTIES
Thermal Conductivity at °CW / (m*K)
2040.5
35032.5
70025.5
HEAT TREATMENT
Soft Annealing °C650-700
CoolingSlowly
Hardness HBmax. 280
Stress-relief Annealing °C630-650
CoolingFurnace
1st Pre-Heating °Cup to approx. 400 in an air-circulating furnace
2nd and 3rd780 and 1000
Hardening °C1190-1230
QuenchingSalt Bath, at least 520°C Oil, Air
Tempering °Cat least twice 530-560
Hardness after Temperature HRC64-66
SIZE RANGE
ROUNDS - 6 to 450 MM DIA.
SQUARES - 32 to 155 MM
FLATS - THICKNESS -15 to 105 MM | WIDTH -40 to 405 MM
Yes! I am interested
Get CALLBACK

EN24 Steel Round Bars

EN24 Steel Round Bars
 
Ask For Price
Product Price:  Get Latest Price

Product Details:
Minimum Order Quantity200 Kilogram
ShapeRound
Size6 to 450 MM DIA
Surface TreatmentPolished
ApplicationIndustrial

As rolled and Spheroidized Annealed
StandardGradeCMnPSSiNiCrMo
ASTM A2943400.38-0.430.60-0.800.035 max0.040 max0.15-0.351.65-2.000.70-0.900.20-0.30
EN 1025036CrNiMo4 / 1.65110.32-0.400.50-0.800.035 max0.035 max0.40 max0.90-1.200.90-1.20.15-0.30
BS 970EN24 / 817M400.36-0.440.45-0.700.035 max0.040 max0.10-0.401.30-1.701.00-1.400.20-0.35
JIS G4103SNCM 439 / SNCM 80.36-0.430.60-0.900.035 max0.030 max0.15-0.351.60-2.000.60-1.000.15-0.30
EN24 steel is a medium carbon, low alloy steel known for its toughness and strength in generally large sections. EN24 is likewise one kind of nickel chromium molybdenum steels. It can be supplied hardened and tempered in the tensile range of 930-1080 Mpa as well as annealed condition. Pre hardened and tempered EN24 steels can be further surface hardened by flame or induction hardening and by nitriding. EN24 steel is high tensile alloy steel famous for its excellent wear resistance properties and in addition to where high strength properties are required. This Grade is used in components affiliated to shafts, gears, studs and bolts. Its hardness is within the range of 248~302 HB.STEEL PROPERTIES
  • Standard high-speed steel grade
  • Contains well-balanced alloy composition
  • High toughness
  • Great cutting edge retention
PHYSICAL PROPERTIES
Thermal Conductivity at °CW / (m*K)
2040.5
35032.5
70025.5
HEAT TREATMENT
Soft Annealing °C650-700
CoolingSlowly
Hardness HBmax. 280
Stress-relief Annealing °C630-650
CoolingFurnace

1st Pre-Heating °Cup to approx. 400 in an air-circulating furnace
2nd and 3rd780 and 1000
Hardening °C1190-1230
QuenchingSalt Bath, at least 520°C Oil, Air
Tempering °Cat least twice 530-560
Hardness after Temperature HRC64-66
SIZE RANGE
ROUNDS - 6 to 450 MM DIA.
SQUARES - 32 to 155 MM
FLATS - THICKNESS -15 to 105 MM | WIDTH -40 to 405 MM
Yes! I am interested
Get CALLBACK

1.2365 Die Block Steel

Product Price:  Get Latest Price

Product Details:
Minimum Order Quantity200 Kilogram
ApplicationHot press and Mandrels, Press die inserts and Forging die
Hardness HBmax 185
Hardening Degree C1040-1060
Hardness after quenching HRC52
CoolingFurnace
Soft annealing Degree C740 - 800
Coefficient of thermal expansionat Degree C20-700
QuenchingOil or Hot Bath 500-550 Degree C

Chemical Composition - (Typical Analysis in %)
STANDARDSX210CrW12H10DIN 2365AISI H10AFNOR 32CDV12-28

CSiMnPSCrMoV
0.28-0.350.10-0.4000000.20-0.400.003 max0.030max2.70-3.202.50-3.000.40-0.75

USAGermanyJapanBritish
AISI / SAEDIN, WNrJIS G4404BS 4659
H10 / T208101.2365 / 32CrMoV12-28SKD7BH10

Ventura Alloy and Steels Supplies & Stocks H10 Steel in India and abroad. H10 is an amazing high-temperature quality and treating resistance, thermal conductivity and low powerlessness to hot cracking. It can be water cooled to a restricted degree and also suitable for cold hobbing. Utilized for press and penetrating mandrels pass on supplements, massive metal die casting tools.
STEEL PROPERTIES
  • Hot Work Steel H10 is equivalent steel of DIN 2365
  • Great tempering resistance
  • Less susceptible for high hot cracking
  • Excellent thermal conductivity
  • High-temperature durability
  • Can be water-cooled to a constrained degree

APPLICATIONThis tool steel is used for hot press and mandrels, press die inserts and forging die, remarkable hot metal die casting tools, die-casting moulds for non-ferrous overwhelming metal pressure die-casting.
PHYSICAL PROPERTIES
Coefficient of Thermal Expansion at °C10¯¿¿¿ m / (m*K)
20-10011.7
20-20012.4
20-30012.7
20-40013.2
20-50013.5
20-60013.7
20-70013.8

Thermal Conductivity at °CW / (m*K)
2032.6
35034.4
70032.4

HEAT TREATMENT
Soft Annealing °C740-800
CoolingFurnace
Hardness HBmax. 185
Hardening °C1040-1060
QuenchingOil or Hot Bath 500-550°C
Hardness after quenching HRC52

Tempering°C after quenching100210300400500550600650700
HRC5150.550505351484134
 
Ask For Price
Yes! I am interested
Get CALLBACK

2365 Die Block Steel

Product Price:  Get Latest Price

Product Details:
Minimum Order Quantity200 Kilogram
ApplicationHot press and Mandrels, Press die inserts and Forging die
Hardness HBmax 185
Hardening Degree C1040-1060
Hardness after quenching HRC52
CoolingFurnace
Soft annealing Degree C740 - 800
Coefficient of thermal expansionat Degree C20-700
QuenchingOil or Hot Bath 500-550 Degree C

Chemical Composition - (Typical Analysis in %)
STANDARDSX210CrW12H10DIN 2365AISI H10AFNOR 32CDV12-28

CSiMnPSCrMoV
0.28-0.350.10-0.4000000.20-0.400.003 max0.030max2.70-3.202.50-3.000.40-0.75

USAGermanyJapanBritish
AISI / SAEDIN, WNrJIS G4404BS 4659
H10 / T208101.2365 / 32CrMoV12-28SKD7BH10

Ventura Alloy and Steels Supplies & Stocks H10 Steel in India and abroad. H10 is an amazing high-temperature quality and treating resistance, thermal conductivity and low powerlessness to hot cracking. It can be water cooled to a restricted degree and also suitable for cold hobbing. Utilized for press and penetrating mandrels pass on supplements, massive metal die casting tools.
STEEL PROPERTIES
  • Hot Work Steel H10 is equivalent steel of DIN 2365
  • Great tempering resistance
  • Less susceptible for high hot cracking
  • Excellent thermal conductivity
  • High-temperature durability
  • Can be water-cooled to a constrained degree

APPLICATIONThis tool steel is used for hot press and mandrels, press die inserts and forging die, remarkable hot metal die casting tools, die-casting moulds for non-ferrous overwhelming metal pressure die-casting.
PHYSICAL PROPERTIES
Coefficient of Thermal Expansion at °C10¯¿¿¿ m / (m*K)
20-10011.7
20-20012.4
20-30012.7
20-40013.2
20-50013.5
20-60013.7
20-70013.8

Thermal Conductivity at °CW / (m*K)
2032.6
35034.4
70032.4

HEAT TREATMENT
Soft Annealing °C740-800
CoolingFurnace
Hardness HBmax. 185
Hardening °C1040-1060
QuenchingOil or Hot Bath 500-550°C
Hardness after quenching HRC52

Tempering°C after quenching100210300400500550600650700
HRC5150.550505351484134
 
Ask For Price
Yes! I am interested
Get CALLBACK

H10 Die Block Steel

Product Price:  Get Latest Price

Product Details:
Minimum Order Quantity200 Kilogram
ApplicationHot press and Mandrels, Press die inserts and Forging die
Hardness HBmax 185
Hardening Degree C1040-1060
Hardness after quenching HRC52
CoolingFurnace
Soft annealing Degree C740 - 800
Coefficient of thermal expansionat Degree C20-700
QuenchingOil or Hot Bath 500-550 Degree C

Chemical Composition - (Typical Analysis in %)
STANDARDSX210CrW12H10DIN 2365AISI H10AFNOR 32CDV12-28

CSiMnPSCrMoV
0.28-0.350.10-0.4000000.20-0.400.003 max0.030max2.70-3.202.50-3.000.40-0.75

USAGermanyJapanBritish
AISI / SAEDIN, WNrJIS G4404BS 4659
H10 / T208101.2365 / 32CrMoV12-28SKD7BH10

Ventura Alloy and Steels Supplies & Stocks H10 Steel in India and abroad. H10 is an amazing high-temperature quality and treating resistance, thermal conductivity and low powerlessness to hot cracking. It can be water cooled to a restricted degree and also suitable for cold hobbing. Utilized for press and penetrating mandrels pass on supplements, massive metal die casting tools.
STEEL PROPERTIES
  • Hot Work Steel H10 is equivalent steel of DIN 2365
  • Great tempering resistance
  • Less susceptible for high hot cracking
  • Excellent thermal conductivity
  • High-temperature durability
  • Can be water-cooled to a constrained degree

APPLICATIONThis tool steel is used for hot press and mandrels, press die inserts and forging die, remarkable hot metal die casting tools, die-casting moulds for non-ferrous overwhelming metal pressure die-casting.
PHYSICAL PROPERTIES
Coefficient of Thermal Expansion at °C10¯¿¿¿ m / (m*K)
20-10011.7
20-20012.4
20-30012.7
20-40013.2
20-50013.5
20-60013.7
20-70013.8

Thermal Conductivity at °CW / (m*K)
2032.6
35034.4
70032.4

HEAT TREATMENT
Soft Annealing °C740-800
CoolingFurnace
Hardness HBmax. 185
Hardening °C1040-1060
QuenchingOil or Hot Bath 500-550°C
Hardness after quenching HRC52

Tempering°C after quenching100210300400500550600650700
HRC5150.550505351484134
 
Ask For Price
Yes! I am interested
Get CALLBACK

SKD7 Die Block Steel

Product Price:  Get Latest Price

Product Details:
Minimum Order Quantity200 Kilogram
ApplicationHot press and Mandrels, Press die inserts and Forging die
Hardness HBmax 185
Hardening Degree C1040-1060
Hardness after quenching HRC52
CoolingFurnace
Soft annealing Degree C740 - 800
Coefficient of thermal expansionat Degree C20-700
QuenchingOil or Hot Bath 500-550 Degree C

Chemical Composition - (Typical Analysis in %)
STANDARDSX210CrW12H10DIN 2365AISI H10AFNOR 32CDV12-28

CSiMnPSCrMoV
0.28-0.350.10-0.4000000.20-0.400.003 max0.030max2.70-3.202.50-3.000.40-0.75

USAGermanyJapanBritish
AISI / SAEDIN, WNrJIS G4404BS 4659
H10 / T208101.2365 / 32CrMoV12-28SKD7BH10

Ventura Alloy and Steels Supplies & Stocks H10 Steel in India and abroad. H10 is an amazing high-temperature quality and treating resistance, thermal conductivity and low powerlessness to hot cracking. It can be water cooled to a restricted degree and also suitable for cold hobbing. Utilized for press and penetrating mandrels pass on supplements, massive metal die casting tools.
STEEL PROPERTIES
  • Hot Work Steel H10 is equivalent steel of DIN 2365
  • Great tempering resistance
  • Less susceptible for high hot cracking
  • Excellent thermal conductivity
  • High-temperature durability
  • Can be water-cooled to a constrained degree

APPLICATIONThis tool steel is used for hot press and mandrels, press die inserts and forging die, remarkable hot metal die casting tools, die-casting moulds for non-ferrous overwhelming metal pressure die-casting.
PHYSICAL PROPERTIES
Coefficient of Thermal Expansion at °C10¯¿¿¿ m / (m*K)
20-10011.7
20-20012.4
20-30012.7
20-40013.2
20-50013.5
20-60013.7
20-70013.8

Thermal Conductivity at °CW / (m*K)
2032.6
35034.4
70032.4

HEAT TREATMENT
Soft Annealing °C740-800
CoolingFurnace
Hardness HBmax. 185
Hardening °C1040-1060
QuenchingOil or Hot Bath 500-550°C
Hardness after quenching HRC52

Tempering°C after quenching100210300400500550600650700
HRC5150.550505351484134
 
Ask For Price
Yes! I am interested
Explore More Products
X
Find Us Aashish Shah (Chairman & Managing Director) Unit No.1201 & 1202, Ghanshyam Enclave P. Co-Op, Soc. Ltd. New Link Road, Kandivali West, Mumbai - 400067, Maharashtra, India
SEND SMS
SEND E-MAIL
Share Us: