Hot Work Steel

Chemical Composition - (Typical Analysis in %)

H21 Steel is a hot work tool steel for oil or air hardening to develop high hot quality, support of hardness, and warmth checking resistance.

This is mostly utilized as hot work devices, instruments for manufacture of hollows, screws, rivets, nuts and bolts. Die casting tools, forming dies, die inserts, hot shear blades.

Steel Properties:

Hot work steel has great toughness and contains Tungsten, Chromium, Carbon, Vanadium and generally its working hardness is 40.0 to 55.0 HRC size and is accessible in round, level and square shapes.

Application:

The H21 tungsten hot-work tool steels are primarily utilized for hot-working dies and tooling. For example extrusion, die casting & hot-forming of parts.

Physical Properties:

• Production Capacity: As per requirement
• Delivery Time: As per availability

We are offering H13 Hot Die Stainless Steel Rods to our clients.

Chemical Composition - (Typical Analysis in %)

Ventura Alloy and Steels supplies and stocks H13 tool steel in flat, square and round bar. We provide steel in all sizes as your requirements. Consult our team who will assist you for any query related to H13 steel.

SAE AISI H13 steel equivalent with JIS SKD61, GB 4Cr5MoSiV1 and DIN 1.2344 Tool Steel. AISI H13 steel consists of chromium, molybdenum and vanadium and is known for its high hardenability and great toughness.

The molybdenum and vanadium act as strengthening agents while the chromium content helps the AISI H-13 tool steel to withstand softening when used at high temperatures. It also combines shock and abrasion resistance, has good red hardness, can resist rapid cooling and withstand premature heat checking.

H13 Tool Steel has high hot-wear resistance abilities along with great strength, heat conductivity and invulnerability to hot cracking. It has good resistance to abrasion at each low and high temperature. It displays high level of toughness and ductility. H13 has Uniform and high level of machinability and polish ability. It has high-temperature strength and resistance to thermal fatigue, glorious through-hardening properties and shows very limited distortion during hardening.

H3 ESR is the most purified material with the conventional VD route. The nature of material increase the strength, exceptionally increase the micro-cleanness level. H13 ESR is most refined, has greater homogeneity and an exceptionally fine structure, resulting in improved machinability, polishing & high temperature tensile strength. Exceptionally suggest the use of AISI-H13 ESR grade for Aluminum Pressure Die Casting and other part subjected to high working temperatures and high weight quality. H13 is completely ultrasonic examined with 100% positive outcomes according to NDT standards.

Steel Properties:

• Great toughness

• Thermal conductivity

• High hot-wear resistance

• Hot tensile strength

• Insusceptible for hot cracking (Hot Crack resistant)

• Can be water-cooled to a restricted degree

• High Hardenability

Application:

This steel is especially used for ejector pins, tool holders and shrink work chucks. It is majorly widely utilized for manufacture of hot forging die & inserts, hot gripper dies, hot nut tools, hot header dies, brass forging and pressing dies, hot forging aluminum base dies, aluminum casting and extrusion dies, zinc die casting dies, extrusion mandrels, cores, die holder blocks, hot press dies, hot work punches, etc.

• Production Capacity: As per requirement
• Delivery Time: As per availability

We are offering H11 Hot Die Steel Round Bars to our clients.

Chemical Composition - (Typical Analysis in %)

Ventura Alloy and Steels Supplies and Stocks AISI H11 tool steel is a 5% chromium hot work tool steel that is represented by its excellent impact toughness. Chromium hot-work tool steels are designated as group H steels according to the AISI classification system, and specified in ASTM A681 standard. The most commonly used chromium hot-work steels are H11 tool steel, H12 tool steel, and H13 steel, within the series from H1 to H19.

If we compare between H11 and H13, H11 tool steel consists of less vanadium than the commonly used H13 hot work tool steel. This gives H11 steels the higher toughness, with some reduction in wear resistance and tamper resistance. H11 how work steel also has super resistance to thermal fatigue cracking and superb resistance to gross cracking and thermal shock when water cooled in service.

H11 steel is inclusive of all hot work tool steel with excellent rigidity and durability along with great thermal conductivity and invulnerability to hot cracking and can be water cooled to a constrained degree. H11 is primarily used for apparatus holders , ejector pins and shrink fit chucks.

Steel Properties:

• Contains 5% Chromium
• Greater strength
• High toughness
• Best thermal physical phenomenon
• Resistant to hot cracking
• Gives fundamental necessities to long tool life in press forging, die-casting, extrusion processes etc.

Application:

This grade isn't utilized for typical applications in the area of hot-work steels, yet additionally useful for tool holders, bridge kind tools, ejector pins, liner holders, hot work punches, forging dies, and shrink work chucks.

We are offering H11 Hot Work  Steel Rods to our clients.

Chemical Composition - (Typical Analysis in %)

Ventura Alloy and Steels Supplies and Stocks AISI H11 tool steel is a 5% chromium hot work tool steel that is represented by its excellent impact toughness. Chromium hot-work tool steels are designated as group H steels according to the AISI classification system, and specified in ASTM A681 standard. The most commonly used chromium hot-work steels are H11 tool steel, H12 tool steel, and H13 steel, within the series from H1 to H19.

If we compare between H11 and H13, H11 tool steel consists of less vanadium than the commonly used H13 hot work tool steel. This gives H11 steels the higher toughness, with some reduction in wear resistance and tamper resistance. H11 how work steel also has super resistance to thermal fatigue cracking and superb resistance to gross cracking and thermal shock when water cooled in service.

H11 steel is inclusive of all hot work tool steel with excellent rigidity and durability along with great thermal conductivity and invulnerability to hot cracking and can be water cooled to a constrained degree. H11 is primarily used for apparatus holders, ejector pins and shrink fit chucks.

Steel Properties:

• Contains 5% Chromium
• Greater strength
• High toughness
• Best thermal physical phenomenon
• Resistant to hot cracking
• Gives fundamental necessities to long tool life in press forging, die-casting, extrusion processes etc.

Application:

This grade isn't utilized for typical applications in the area of hot-work steels, yet additionally useful for tool holders, bridge kind tools, ejector pins, liner holders, hot work punches, forging dies, and shrink work chucks.

We are offering H11 Die Steel Block to our clients.

Chemical Composition - (Typical Analysis in %)

Ventura Alloy and Steels Supplies and Stocks AISI H11 tool steel is a 5% chromium hot work tool steel that is represented by its excellent impact toughness. The most commonly used chromium hot-work steels are H11 tool steel, H12 tool steel, and H13 steel, within the series from H1 to H19.

If we compare between H11 and H13, H11 tool steel consists of less vanadium than the commonly used H13 hot work tool steel. H11 tool steel is a deep-hardening, air-hardening steel and H11 alloy steel could be deep hardened by heat treatment and air-quenching. That gives minimal size change during heat treatment. H11 how work steel also has super resistance to thermal fatigue cracking and superb resistance to gross cracking and thermal shock when water cooled in service.

H11 steel is inclusive of all hot work tool steel with excellent rigidity and durability along with great thermal conductivity and invulnerability to hot cracking and can be water cooled to a constrained degree. H11 is primarily used for apparatus holders , ejector pins and shrink fit chucks.

Steel Properties:

• Contains 5% Chromium
• Greater strength
• High toughness
• Best thermal physical phenomenon
• Resistant to hot cracking
• Gives fundamental necessities to long tool life in press forging, die-casting, extrusion processes etc.

Application:

This grade isn''t utilized for typical applications in the area of hot-work steels, yet additionally useful for tool holders, bridge kind tools, ejector pins, liner holders, hot work punches, forging dies, and shrink work chucks.

We are offering H11 Stainless Steel Block to our clients.

Chemical Composition - (Typical Analysis in %)

Ventura Alloy and Steels Supplies and Stocks AISI H11 tool steel is a 5% chromium hot work tool steel that is represented by its excellent impact toughness. Chromium hot-work tool steels are designated as group H steels according to the AISI classification system, and specified in ASTM A681 standard. The most commonly used chromium hot-work steels are H11 tool steel, H12 tool steel, and H13 steel, within the series from H1 to H19.

If we compare between H11 and H13, H11 tool steel consists of less vanadium than the commonly used H13 hot work tool steel. This gives H11 steels the higher toughness, with some reduction in wear resistance and tamper resistance. H11 tool steel is a deep-hardening, air-hardening steel and H11 alloy steel could be deep hardened by heat treatment and air-quenching. That gives minimal size change during heat treatment. H11 how work steel also has super resistance to thermal fatigue cracking and superb resistance to gross cracking and thermal shock when water cooled in service.

H11 steel is inclusive of all hot work tool steel with excellent rigidity and durability along with great thermal conductivity and invulnerability to hot cracking and can be water cooled to a constrained degree. H11 is primarily used for apparatus holders, ejector pins and shrink fit chucks.

• Contains 5% Chromium
• Greater strength
• High toughness
• Best thermal physical phenomenon
• Resistant to hot cracking
• Gives fundamental necessities to long tool life in press forging, die-casting, extrusion processes etc.

Application:

This grade isn't utilized for typical applications in the area of hot-work steels, yet additionally useful for tool holders, bridge kind tools, liner holders, hot work punches, forging dies, and shrink work chucks.

We are offering H11 Die Steel Round Bars to our clients.

Chemical Composition - (Typical Analysis in %)

Ventura Alloy and Steels Supplies and Stocks AISI H11 tool steel is a 5% chromium hot work tool steel that is represented by its excellent impact toughness. Chromium hot-work tool steels are designated as group H steels according to the AISI classification system, and specified in ASTM A681 standard. The most commonly used chromium hot-work steels are H11 tool steel, H12 tool steel, and H13 steel, within the series from H1 to H19.

If we compare between H11 and H13, H11 tool steel consists of less vanadium than the commonly used H13 hot work tool steel. This gives H11 steels the higher toughness, with some reduction in wear resistance and tamper resistance. H11 tool steel is a deep-hardening, air-hardening steel and H11 alloy steel could be deep hardened by heat treatment and air-quenching. That gives minimal size change during heat treatment. H11 how work steel also has super resistance to thermal fatigue cracking and superb resistance to gross cracking and thermal shock when water cooled in service.

H11 steel is inclusive of all hot work tool steel with excellent rigidity and durability along with great thermal conductivity and invulnerability to hot cracking and can be water cooled to a constrained degree. H11 is primarily used for apparatus holders , ejector pins and shrink fit chucks.

Steel Properties:

• Contains 5% Chromium

• Greater strength

• High toughness

• Best thermal physical phenomenon

• Resistant to hot cracking

• Gives fundamental necessities to long tool life in press forging, die-casting, extrusion processes etc.

Application:

This grade isn't utilized for typical applications in the area of hot-work steels, yet additionally useful for tool holders, bridge kind tools, ejector pins, liner holders, hot work punches, forging dies, and shrink work chucks.