Minimum Order Quantity | 200 Onwards |
Application | Automobile Industry |
Shape | Rectangular |
Material | SS |
Thickness | 125 to 1000 mm |
Hardness HB | Max 240 |
Hardening Degree C | 840-900 |
Hardness after quenching HRC | 55-57 |
Cooling | Furnace |
Soft annealing Degree C | 650-710 |
Coefficient of thermal expansionat Degree C | 20-700 |
Width | 130 to 1600 mm |
We are offering 56NICRMOV7 Die Steel Block to our clients.
Chemical Composition - (Typical Analysis in %)
STANDARDS | 55NiCrMoV7 | DB6 | DIN 2714 | AISI L6 | AFNOR 55NCDVV7 | JIS SKT4 |
C | Si | Mn | P | S | Cr | Ni | Mo | V |
0.50-0.60 | 0.10-0.40 | 0.65-0.95 | <0.015 | <0.004 | 1.0-1.20 | 1.50-1.80 | 0.45-0.55 | 0.07-0.12 |
USA | Europe | Germany | China | Japan | India | R. of Korea | Russia |
AISI / SAE | En | DIN, WNr | GB | JIS | IS | KS | GOST |
A681 L6 | 55NiCrMoV7 | 56NiCrMoV7 | 5CrNiMo | SKT4 | T55Ni7Cr4Mo5V1 | STF4 | 4ChMNFS |
Ventura Alloy and Steels Stocks and Supplies Die Block Steels DB6 / 2714 in India and abroad. DB6 Steel is an extreme pass on steel with high treating resistance and great through-solidifying properties. Its nickel substance has it uncommonly effect safe – a highly recommendable element for vast mallet & press bites the dust alike. This evaluation is generally supplied in toughened condition or extinguished and tempered to 1300 N/mm² & a working hardness of 370 to 410 HB (round) or 355 to 400 HB (square, level).
Utilized as standard steel for manufacturing passes on of different kinds, press bites the dust, expulsion kicks the bucket, retainer plates, heavily clad trim bites the dust, hot shear sharpened pieces of steels and instrument holder.
Process Route:
Eaf+Lf+Vd+Upset+Forged+Annealed+Rough Turned For Rounds/Milled For Flats+Oil Quenched And Double Tempered+ Rough Turned For Rounds/Milled For Flats
Steel Properties:
The special Hot Work Pre-hardened Steel has great toughness and high wear resistance. DB6 Steel is generally supplied in hard, quenched, tempered and also in annealed condition in special cases. Usually it's working hardness is 360-430 BHN. This steel grade is the upgraded version of DIN 2713 for greater efficiency and performance.
Application:
Dies for Specially Drop and Close Die Forgings for Hammers & Mechanical Presses, Die Moulds, Shoe Blocks, Die Holder, Cassettes, Piston Rods, Cranks, Boaster, Shearing Blades, Tools, Plastic Moulds etc.
Minimum Order Quantity | 200 Onwards |
Application | Automobile Industry |
Shape | Rectangular |
Technique | Hot Rolled |
Thickness | 125 to 1000 mm |
Hardness HB | Max 240 |
Hardening Degree C | 840 - 900 Deg C |
Hardness after quenching HRC | 55 - 57 HRC |
Cooling | Furnace |
We are manufacturer and supplier of DB6 Steel Die Block .
Chemical Composition - (Typical Analysis in %)
STANDARDS |
55NiCrMoV7 |
DB6 |
DIN 2714 |
AISI L6 |
AFNOR 55NCDVV7 |
JIS SKT4 |
C |
Si |
Mn |
P |
S |
Cr |
Ni |
Mo |
V |
0.50-0.60 |
0.10-0.40 |
0.65-0.95 |
<0.015 |
<0.004 |
1.0-1.20 |
1.50-1.80 |
0.45-0.55 |
0.07-0.12 |
USA |
Europe |
Germany |
China |
Japan |
India |
R. of Korea |
Russia |
AISI / SAE |
En |
DIN, WNr |
GB |
JIS |
IS |
KS |
GOST |
A681 L6 |
55NiCrMoV7 |
56NiCrMoV7 |
5CrNiMo |
SKT4 |
T55Ni7Cr4Mo5V1 |
STF4 |
4ChMNFS |
Ventura Alloy and Steels Stocks and Supplies Die Block Steels DB6 / 2714 in India and abroad. DB6 Steel is an extreme pass on steel with high treating resistance and great through-solidifying properties. Its nickel substance has it uncommonly effect safe – a highly recommendable element for vast mallet & press bites the dust alike. This evaluation is generally supplied in toughened condition or extinguished and tempered to 1300 N/mm² & a working hardness of 370 to 410 HB (round) or 355 to 400 HB (square, level).
Utilized as standard steel for manufacturing passes on of different kinds, press bites the dust, expulsion kicks the bucket, retainer plates, heavily clad trim bites the dust, hot shear sharpened pieces of steels and instrument holder.
Utilized as standard steel for manufacturing passes on of different kinds, press bites the dust, expulsion kicks the bucket, retainer plates, heavily clad trim bites the dust, hot shear sharpened pieces of steels and instrument holder.
Process Route:
Eaf+Lf+Vd+Upset+Forged+Annealed+Rough Turned For Rounds/Milled For Flats+Oil Quenched And Double Tempered+ Rough Turned For Rounds/Milled For Flats
Steel Properties:
The special Hot Work Pre-hardened Steel has great toughness and high wear resistance. DB6 Steel is generally supplied in hard, quenched, tempered and also in annealed condition in special cases. Usually it's working hardness is 360-430 BHN. This steel grade is the upgraded version of DIN 2713 for greater efficiency and performance.
Application:
Dies for Specially Drop and Close Die Forgings for Hammers & Mechanical Presses, Die Moulds, Shoe Blocks, Die Holder, Cassettes, Piston Rods, Cranks, Boaster, Shearing Blades, Tools, Plastic Moulds etc.
Minimum Order Quantity | 200 Kg |
Application | Automobile Industry |
Shape | Rectangular |
Hardness HB | Max 240 |
Hardening Degree C | 1030-1060 |
Hardness after quenching HRC | 55 |
Cooling | Furnace |
Soft annealing Degree C | 760 - 810 |
Coefficient of thermal expansionat Degree C | 20-700 |
Thickness | 20 to 400 mm |
Width | 40 to 700 mm |
We are offering 1.2344 Stainless Steel Block to our clients.
Chemical Composition - (Typical Analysis in %)
STANDARDS | X40CrMoV5 | H13 | DIN 2344 | AISI H13 | AFNOR Z40CDV5 | JIS SKD61 |
C | Si | Mn | P | S | Cr | Mo | V |
0.35-0.45 | 0.90-1.20 | 0.30-0.50 | <0.03 | <0.004 | 4.90-5.40 | 1.20-1.75 | 0.90-1.20 |
Ventura Alloy and Steels supplies and stocks H13 tool steel in flat, square and round bar. We provide steel in all sizes as your requirements. Consult our team who will assist you for any query related to H13 steel.
SAE AISI H13 steel equivalent with JIS SKD61, GB 4Cr5MoSiV1 and DIN 1.2344 Tool Steel. AISI H13 steel consists of chromium, molybdenum and vanadium and is known for its high hardenability and great toughness.
The molybdenum and vanadium act as strengthening agents while the chromium content helps the AISI H-13 tool steel to withstand softening when used at high temperatures.
H13 Tool Steel has high hot-wear resistance abilities along with great strength, heat conductivity and invulnerability to hot cracking. H13 has Uniform and high level of machinability and polish ability. It has high-temperature strength and resistance to thermal fatigue, glorious through-hardening properties and shows very limited distortion during hardening.
H3 ESR is the most purified material with the conventional VD route. The nature of material increase the strength, exceptionally increase the micro-cleanness level. H13 ESR is most refined, has greater homogeneity and an exceptionally fine structure, resulting in improved machinability, polishing & high temperaturetensile strength. Exceptionally suggest the use of AISI-H13 ESR grade for Aluminum Pressure Die Casting and other part subjected to high working temperatures and high weight quality. H13 is completely ultrasonic examined with 100% positive outcomes according to NDT standards.
Steel Properties:
Application:
This steel is especially used for ejector pins, tool holders and shrink work chucks. It is majorly widely utilized for manufacture of hot forging die & inserts, hot gripper dies, hot nut tools, hot header dies, brass forging and pressing dies, hot forging aluminum base dies, aluminum casting and extrusion dies, zinc die casting dies, extrusion mandrels, cores, die holder blocks, hot press dies, hot work punches, etc.
Minimum Order Quantity | 200 Kg |
Usage/Application | Construction |
Shape | Rectangular |
Technique | Hot Rolled |
Thickness | 125 to 1000 mm |
Hardness HB | Max 240 |
Hardening Degree C | 840-900 Deg C |
Hardness after quenching HRC | 55-57 HRC |
Cooling | Furnace |
Soft annealing Degree C | 650-710 Deg C |
Coefficient of thermal expansionat Degree C | 20-700 Deg C |
Width | 130 to 1600 mm |
We are offering DB6 Hot Work Stainless Steel Block to our clients.
Chemical Composition - (Typical Analysis in %)
STANDARDS | 55NiCrMoV7 | DB6 | DIN 2714 | AISI L6 | AFNOR 55NCDVV7 | JIS SKT4 |
C | Si | Mn | P | S | Cr | Ni | Mo | V |
0.50-0.60 | 0.10-0.40 | 0.65-0.95 | <0.015 | <0.004 | 1.0-1.20 | 1.50-1.80 | 0.45-0.55 | 0.07-0.12 |
USA | Europe | Germany | China | Japan | India | R. of Korea | Russia |
AISI / SAE | En | DIN, WNr | GB | JIS | IS | KS | GOST |
A681 L6 | 55NiCrMoV7 | 56NiCrMoV7 | 5CrNiMo | SKT4 | T55Ni7Cr4Mo5V1 | STF4 | 4ChMNFS |
Ventura Alloy and Steels Stocks and Supplies Die Block Steels DB6 / 2714 in India and abroad. DB6 Steel is an extreme pass on steel with high treating resistance and great through-solidifying properties. Its nickel substance has it uncommonly effect safe – a highly recommendable element for vast mallet & press bites the dust alike. This evaluation is generally supplied in toughened condition or extinguished and tempered to 1300 N/mm² & a working hardness of 370 to 410 HB (round) or 355 to 400 HB (square, level).
Utilized as standard steel for manufacturing passes on of different kinds, press bites the dust, expulsion kicks the bucket, retainer plates, heavily clad trim bites the dust, hot shear sharpened pieces of steels and instrument holder.
Process Route:
Eaf+Lf+Vd+Upset+Forged+Annealed+Rough Turned For Rounds/Milled For Flats+Oil Quenched And Double Tempered+ Rough Turned For Rounds/Milled For Flats
Steel Properties:
The special Hot Work Pre-hardened Steel has great toughness and high wear resistance. DB6 Steel is generally supplied in hard, quenched, tempered and also in annealed condition in special cases. Usually it's working hardness is 360-430 BHN. This steel grade is the upgraded version of DIN 2713 for greater efficiency and performance.
Application:
Dies for Specially Drop and Close Die Forgings for Hammers & Mechanical Presses, Die Moulds, Shoe Blocks, Die Holder, Cassettes, Piston Rods, Cranks, Boaster, Shearing Blades, Tools, Plastic Moulds etc.
Minimum Order Quantity | 200 Kg |
Application | Construction |
Shape | Rectangular |
Material | SS |
Hardness HB | max 240 |
Hardening Degree C | 840-900 Deg C |
Hardness after quenching HRC | 55-57 HRC |
Cooling | Furnace |
Soft annealing Degree C | 650-710 Deg C |
Coefficient of thermal expansionat Degree C | 20-700 Deg C |
Thickness | 125 - 1000 mm |
Width | 130 to 1600 mm |
Chemical Composition - (Typical Analysis in %)
STANDARDS | 55NiCrMoV7 | DB6 | DIN 2714 | AISI L6 | AFNOR 55NCDVV7 | JIS SKT4 |
C | Si | Mn | P | S | Cr | Ni | Mo | V |
0.50-0.60 | 0.10-0.40 | 0.65-0.95 | <0.015 | <0.004 | 1.0-1.20 | 1.50-1.80 | 0.45-0.55 | 0.07-0.12 |
USA | Europe | Germany | China | Japan | India | R. of Korea | Russia |
AISI / SAE | En | DIN, WNr | GB | JIS | IS | KS | GOST |
A681 L6 | 55NiCrMoV7 | 56NiCrMoV7 | 5CrNiMo | SKT4 | T55Ni7Cr4Mo5V1 | STF4 | 4ChMNFS |
Ventura Alloy and Steels Stocks and Supplies Die Block Steels DB6 / 2714 in India and abroad. DB6 Steel is an extreme pass on steel with high treating resistance and great through-solidifying properties. Its nickel substance has it uncommonly effect safe – a highly recommendable element for vast mallet & press bites the dust alike. This evaluation is generally supplied in toughened condition or extinguished and tempered to 1300 N/mm² & a working hardness of 370 to 410 HB (round) or 355 to 400 HB (square, level).
Utilized as standard steel for manufacturing passes on of different kinds, press bites the dust, expulsion kicks the bucket, retainer plates, heavily clad trim bites the dust, hot shear sharpened pieces of steels and instrument holder.
Peocess Route:
EAF+LF+VD+UPSET+FORGED+ANNEALED+ROUGH TURNED FOR ROUNDS/MILLED FOR FLATS+OIL QUENCHED AND DOUBLE TEMPERED+ROUGH TURNED FOR ROUNDS/MILLED FOR FLATS
Steel Properties:
The exceptional Hot Work Pre-solidified Steel has great toughness and high wear resistance. DB6 Steel is generally provided in hard, quenched, tempered and annealed condition in strengthened condition in exceptional cases. Normally it's working hardness is 360-430 BHN. This steel grade is the updated type of DIN 2713 for higher efficiency and performance.
Application:
Dies for Specially Drop and Close Die Forgings for Hammers & Mechanical Presses, Die Moulds, Shoe Blocks, Die Holder, Piston Rods, Bolster, Cranks, Cassettes, Plastic Moulds, Shearing Blades, Tools etc.