Ventura Alloy And Steels Private Limited

SAE 4140 is a versatile low-alloy steel that contains chromium, molybdenum, and manganese. It is widely recognized for its high tensile strength, excellent toughness, good ductility, and superior wear resistance. It offers a balanced combination of strength, hardness, and fatigue resistance, making it ideal for demanding applications in various industries.

• Chemical Composition:

  • Carbon (C): 0.38 – 0.43%

  • Chromium (Cr): 0.75 – 1.00%

  • Manganese (Mn): 0.75 – 1.00%

  • Molybdenum (Mo): 0.15 – 0.25%

  • Silicon (Si): 0.15 – 0.30%

• Mechanical Properties (Typical after heat treatment):

  • Tensile Strength: 850 – 1000 MPa

  • Yield Strength: 655 MPa (min)

  • Elongation: 20%

  • Hardness: 28–32 HRC (can go up to 55 HRC after hardening)

• Heat Treatment:

  • Normalizing

  • Annealing

  • Quenching & Tempering

  • Nitriding (for surface hardness)

• Excellent strength-to-weight ratio

• Good toughness and fatigue strength

• High hardenability and wear resistance

• Machinable in annealed condition

• Weldable with proper precautions

• Gears and shafts

• Crankshafts and axles

• Bolts and fasteners

• Oil & gas industry components

• Automotive and aerospace parts

• Tool holders and dies

We are offering 2365 Die Stainless Steel Rods to our clients.

Chemical Composition - (Typical Analysis in %)

Ventura Alloy and Steels Supplies & Stocks H10 Steel in India and abroad. H10 is an amazing high-temperature quality and treating resistance, thermal conductivity and low powerlessness to hot cracking. Utilized for press and penetrating mandrels pass on supplements, massive metal die casting tools.

Steel Properties:

• Hot Work Steel H10 is equivalent steel of DIN 2365
• Great tempering resistance
• Less susceptible for high hot cracking
• Excellent thermal conductivity
• High-temperature durability
• Can be water-cooled to a constrained degree

Application:

This tool steel is used for hot press and mandrels, press dieinserts and forging die, remarkable hot metal die casting tools, die-casting moulds for non-ferrous overwhelming metal pressure die-casting.

Physical Properties:

Heat Treatment:

Chemical Composition - (Typical Analysis in %)

VENTURA EN47 Chromium Vanadium type spring steel supplied in the as rolled condition as well as spheroidized annealed condition. EN47 is suitable for oil hardening and tempering. When used in the oil hardened and tempered condition EN47 spring steel combines spring characteristics with good wear and abrasion resistance. When hardened EN47 offers excellent toughness and shock resistance which make it a suitable alloy spring steel for parts exposed to stress, shock and vibration.

Applications:

En47 steels, highlight the advantage is good hardenability, another hot working performance, comprehensive mechanical properties, decarburization resistance is also good big cross section of various important spring, such as automobile, locomotive, large plate spring, spring, etc. SUP10 Spring main used for heavy vehicles, tractors, industrial production load, stress and the diameter of the larger plate spring and helical spring. It is also used widely in the motor vehicle industry and many general engineering applications. Suitable for applications that require high tensile strength and toughness. Typical applications include crankshafts, steering knuckles, gears, spindles and pumps.

Forging:

Forge at 1050°C. Do not work this steel when it has fallen below 840°C.

Annealing:

Heat slowly to 820-840°C, soak well. Cool slowly in the furnace.

( Our annealing is done in electric furnace to avoid decarburization. )

Hardening:

Pre heat slowly to 650/700°C and thoroughly soak. Continue heating to the final hardening temperature of 830/860°C and allow the component to be heated through. Quench in oil.

Tempering:

Temper the EN47 spring steel component immediately after quenching whilst tools are still hand warm. Re-heat to the tempering temperature then soak for one hour per 25 millimetre of total thickness (2 hours minimum) Cool in air. For most applications tempering of this grade will be between 400-600°C.

Heat Treatment:

Heat treatment temperatures, including rate of heating, cooling and soaking times etc. will vary due to factors such as the shape and size of each component. Other considerations during the heat treatment process include the type of furnace, quenching medium and workpiece transfer facilities. Please consult your heat treatment provider for full guidance on heat treatment of EN47.

Chemical Composition - (Typical Analysis in %)

H21 Steel is a hot work tool steel for oil or air hardening to develop high hot quality, support of hardness, and warmth checking resistance.

This is mostly utilized as hot work devices, instruments for manufacture of hollows, screws, rivets, nuts and bolts. Die casting tools, forming dies, die inserts, hot shear blades.

Steel Properties:

Hot work steel has great toughness and contains Tungsten, Chromium, Carbon, Vanadium and generally its working hardness is 40.0 to 55.0 HRC size and is accessible in round, level and square shapes.

Application:

The H21 tungsten hot-work tool steels are primarily utilized for hot-working dies and tooling. For example extrusion, die casting & hot-forming of parts.

Physical Properties:

• Standard high-speed steel grade
• Contains well-balanced alloy composition
• High toughness
• Great cutting edge retention

Chemical Composition - (Typical Analysis in %)

H12 Hot Work Die Steel could be a five-hitter Cr, general hot work steel that is characterized by wonderful effect strength. It contains less vanadium than the broadly utilized H13 hot work tool steel, and furthermore the tungsten content gives higher temper resistance. It has smart resistance to thermal fatigue cracking (heat checking) and excellent resistance to gross cracking and thermal shock once water cooled in commission. TLS H12 hot work tool steel is normally prescribed for warm tooling applications wherever most resistance from cracking is required. Such applications grasp die casting, hot punches, hot shear cutting edges, shaping dies, extrusion tooling and hot gripper dies.

Steel Properties:

• Magnificent Resistance to Wear

• High Strength at Elevated Temperature

• Homogenizing with High Toughness

• Additional Fine Structure without Grain-Boundary Carbide

Physical Properties:

Price range: 350-750 per kg

Chemical Composition - (Typical Analysis in %)

H21 Steel is a hot work tool steel for oil or air hardening to develop high hot quality, support of hardness, and warmth checking resistance.

This is mostly utilized as hot work devices, instruments for manufacture of hollows, screws, rivets, nuts and bolts. Die casting tools, forming dies, die inserts, hot shear blades.

Steel Properties:

Hot work steel has great toughness and contains Tungsten, Chromium, Carbon, Vanadium and generally its working hardness is 40.0 to 55.0 HRC size and is accessible in round, level and square shapes.

Application:

The H21 tungsten hot-work tool steels are primarily utilized for hot-working dies and tooling. For example extrusion, die casting & hot-forming of parts.

Physical Properties:

Heat Treatment:

We are offering SKD7 Die Steel Round Bar to our clients.

Chemical Composition - (Typical Analysis in %)

Ventura Alloy and Steels Supplies & Stocks H10 Steel in India and abroad. H10 is an amazing high-temperature quality and treating resistance, thermal conductivity and low powerlessness to hot cracking. It can be water cooled to a restricted degree and also suitable for cold hobbing. Utilized for press and penetrating mandrels pass on supplements, massive metal die casting tools.

Steel Properties:

• Hot Work Steel H10 is equivalent steel of DIN 2365
• Great tempering resistance
• Less susceptible for high hot cracking
• Excellent thermal conductivity
• High-temperature durability
• Can be water-cooled to a constrained degree

Application:

This tool steel is used for hot press and mandrels, press dieinserts and forging die, remarkable hot metal die casting tools, die-casting moulds for non-ferrous overwhelming metal pressure die-casting.

Physical Properties:

Heat Treatment

Chemical Composition - (Typical Analysis in %)

H21 Steel is a hot work tool steel for oil or air hardening to develop high hot quality, support of hardness, and warmth checking resistance.

This is mostly utilized as hot work devices, instruments for manufacture of hollows, screws, rivets, nuts and bolts. Die casting tools, forming dies, die inserts, hot shear blades.

Steel Properties:

Hot work steel has great toughness and contains Tungsten, Chromium, Carbon, Vanadium and generally its working hardness is 40.0 to 55.0 HRC size and is accessible in round, level and square shapes.

Application:

The H21 tungsten hot-work tool steels are primarily utilized for hot-working dies and tooling. For example extrusion, die casting & hot-forming of parts.

Physical Properties:

Chemical Composition - (Typical Analysis in %)

H21 Steel is a hot work tool steel for oil or air hardening to develop high hot quality, support of hardness, and warmth checking resistance.

This is mostly utilized as hot work devices, instruments for manufacture of hollows, screws, rivets, nuts and bolts. Die casting tools, forming dies, die inserts, hot shear blades.

Steel Properties:

Hot work steel has great toughness and contains Tungsten, Chromium, Carbon, Vanadium and generally its working hardness is 40.0 to 55.0 HRC size and is accessible in round, level and square shapes.

Application:

The H21 tungsten hot-work tool steels are primarily utilized for hot-working dies and tooling. For example extrusion, die casting & hot-forming of parts.

Physical Properties:

Chemical Composition - (Typical Analysis in %)

H21 Steel is a hot work tool steel for oil or air hardening to develop high hot quality, support of hardness, and warmth checking resistance.

This is mostly utilized as hot work devices, instruments for manufacture of hollows, screws, rivets, nuts and bolts. Die casting tools, forming dies, die inserts, hot shear blades.

Steel Properties:

Hot work steel has great toughness and contains Tungsten, Chromium, Carbon, Vanadium and generally its working hardness is 40.0 to 55.0 HRC size and is accessible in round, level and square shapes.

Application:

The H21 tungsten hot-work tool steels are primarily utilized for hot-working dies and tooling. For example extrusion, die casting & hot-forming of parts.

Physical Properties: