Call 0804605175580% Response Rate
Send E-mail

Alloy Steel Rods

Leading Wholesale Trader of 2344 steel round bars, skt4 steel round bars, en series steel, 1.2367 cold work steel round bar, 2080 cold work round bars and 50crv4 steel round bar from Mumbai.
Get CALLBACK

2344 Steel Round Bars

2344 Steel Round Bars
  • +9
 
Get Best Quote
Approx. Rs 192 / Kilogram
Get Latest Price
Product Brochure

Product Details:
Minimum Order Quantity200 Kilogram
Single Piece Length3 - 18 Meter
TechniqueHot Rolled
ApplicationAutomobile Industry
ShapeRounds
Soft annealing Degree C760 - 810 Deg C
CoolingFurnace
Thermal Conductivity Degree C20-700 Deg C
Diameter10 - 500 mm
Hardening Degree C1030-1060 Deg C
Hardness HBmax 240

Chemical Composition - (Typical Analysis in %)

STANDARDS

X40CrMoV5

H13

DIN 2344

AISI H13

AFNOR Z40CDV5

JIS SKD61

 

C

Si

Mn

P

S

Cr

Mo

V

0.35-0.45

0.90-1.20

0.30-0.50

<0.03

<0.004

4.90-5.40

1.20-1.75

0.90-1.20


Ventura Alloy and Steels supplies and stocks H13 tool steel in flat, square and round bar. We provide steel in all sizes as your requirements. Consult our team who will assist you for any query related to H13 steel.


SAE AISI H13 steel equivalent with JIS SKD61, GB 4Cr5MoSiV1 and DIN 1.2344 Tool Steel. AISI H13 steel consists of chromium, molybdenum and vanadium and is known for its high hardenability and great toughness.


The molybdenum and vanadium act as strengthening agents while the chromium content helps the AISI H-13 tool steel to withstand softening when used at high temperatures. It also combines shock and abrasion resistance, has good red hardness, can resist rapid cooling and withstand premature heat checking.


H13 Tool Steel has high hot-wear resistance abilities along with great strength, heat conductivity and invulnerability to hot cracking. It has good resistance to abrasion at each low and high temperature. It displays high level of toughness and ductility. H13 has Uniform and high level of machinability and polish ability. It has high-temperature strength and resistance to thermal fatigue, glorious through-hardening properties and shows very limited distortion during hardening.

 

H3 ESR is the most purified material with the conventional VD route. The nature of material increase the strength, exceptionally increase the micro-cleanness level. H13 ESR is most refined, has greater homogeneity and an exceptionally fine structure, resulting in improved machinability, polishing & high temperature tensile strength. Exceptionally suggest the use of AISI-H13 ESR grade for Aluminum Pressure Die Casting and other part subjected to high working temperatures and high weight quality. H13 is completely ultrasonic examined with 100% positive outcomes according to NDT standards.

 

Steel Properties

  • Great toughness

  • Thermal conductivity

  • High hot-wear resistance

  • Hot tensile strength

  • Insusceptible for hot cracking (Hot Crack resistant)

  • Can be water-cooled to a restricted degree

  • High Hardenability

Application:

This steel is especially used for ejector pins, tool holders and shrink work chucks. It is majorly widely utilized for manufacture of hot forging die & inserts, hot gripper dies, hot nut tools, hot header dies, brass forging and pressing dies, hot forging aluminum base dies, aluminum casting and extrusion dies, zinc die casting dies, extrusion mandrels, cores, die holder blocks, hot press dies, hot work punches, etc.

 

Yes! I am interested
Get CALLBACK

SKT4 Steel Round Bars

SKT4 Steel Round Bars
  • +2
 
Get Best Quote
Approx. Rs 150 / Kilogram
Get Latest Price

Product Details:
Minimum Order Quantity200 Kilogram
Single Piece Length6 meter
TechniqueHot Rolled
ApplicationConstruction
ShapeRounds
CoolingFurnace
Soft annealing Degree C650-710 Deg C
Hardening Degree C840-900 Deg C
Hardness after quenching HRC55-57 HRC
Coefficient of thermal expansionat Degree C20-700 Deg C
Diameter60 to 1000 mm
Hardness HBmax 240

Chemical Composition - (Typical Analysis in %)

STANDARDS

55NiCrMoV7

DB6

DIN 2714

AISI L6

AFNOR 55NCDVV7

JIS SKT4

 

C

Si

Mn

P

S

Cr

Ni

Mo

V

0.50-0.60

0.10-0.40

0.65-0.95

<0.015

<0.004

1.0-1.20

1.50-1.80

0.45-0.55

0.07-0.12

 

USA

Europe

Germany

China

Japan

India

R. of Korea

Russia

AISI / SAE

En

DIN, WNr

GB

JIS

IS

KS

GOST

A681 L6

55NiCrMoV7

56NiCrMoV7

5CrNiMo

SKT4

T55Ni7Cr4Mo5V1

STF4

4ChMNFS

 

Ventura Alloy and Steels Stocks and Supplies Die Block Steels DB6 / 2714 in India and abroad. DB6 Steel is an extreme pass on steel with high treating resistance and great through-solidifying properties. Its nickel substance has it uncommonly effect safe – a highly recommendable element for vast mallet & press bites the dust alike. This evaluation is generally supplied in toughened condition or extinguished and tempered to 1300 N/mm² & a working hardness of 370 to 410 HB (round) or 355 to 400 HB (square, level).

Utilized as standard steel for manufacturing passes on of different kinds, press bites the dust, expulsion kicks the bucket, retainer plates, heavily clad trim bites the dust, hot shear sharpened pieces of steels and instrument holder.


Process Route:

EAF+LF+VD+UPSET+FORGED+ANNEALED+ROUGH TURNED FOR ROUNDS/MILLED FOR FLATS+OIL QUENCHED AND DOUBLE TEMPERED+ROUGH TURNED FOR ROUNDS/MILLED FOR FLATS


Steel Properties:

The exceptional Hot Work Pre-solidified Steel has great toughness and high wear resistance. DB6 Steel is generally provided in hard, quenched, tempered and annealed condition in strengthened condition in exceptional cases. Normally it's working hardness is 360-430 BHN. This steel grade is the updated type of DIN 2713 for higher efficiency and performance.


Application:

Dies for Specially Drop and Close Die Forgings for Hammers & Mechanical Presses, Die Moulds, Shoe Blocks, Die Holder, Piston Rods, Bolster, Cranks, Cassettes, Plastic Moulds, Shearing Blades, Tools etc.

 

Yes! I am interested
Get CALLBACK

EN Series Steel

EN Series Steel
 
Get Best Quote
Approx. Rs 90 / Kg
Get Latest Price

Product Details:
Material GradeEN 8
Usage/ApplicationAutomobile Industry
ShapeRounds and Flats
Size5.5 - 100mm
GradeEN8, En9, En18, En19
Length6000mm

En Series steel is extensively used in Automobile Industry and Components Manufacturing. A versatile material
Yes! I am interested
Get CALLBACK

1.2367 Cold Work Steel Round Bar

1.2367 Cold Work Steel Round Bar
  • +3
 
Get Best Quote
Approx. Rs 150 / Kilogram
Get Latest Price
Product Brochure

Product Details:
Minimum Order Quantity200 Kilogram
Usage/ApplicationConstruction
ShapeRound
Single Piece Length3 - 18 Meter
TechniqueCold Rolled
Thickness/Diameter50 - 500 mm
MaterialAlloy Steel
CoolingFurnace
Thermal Conductivity at Degree C20-700 Deg C
Soft annealing Degree C840-870 Deg C
Coefficient of thermal expansionat Degree C20-400 Deg C
Hardness HBMax. 250
Hardness after quenching HRC63 HRC

We are offering 1.2367 Cold Work SS Round Bar to our clients at reasonable price.


Features:

  • Wear resistance to dies
  • Plastic Deformation resistance
  • Minimum chipping off
  • Crack resistant
  • Greater hardness & strength
  • More toughness
  • Good machinability and grind ability
Yes! I am interested
Get CALLBACK

2080 Cold Work Round Bars

2080 Cold Work Round Bars
  • +9
 
Get Best Quote
Approx. Rs 120 / Kg
Get Latest Price
Product Brochure

Product Details:
Minimum Order Quantity200 Kg
ShapeRound
Thickness/Diameter20 to 450 mm
Single Piece Length3 - 18 Meter
Usage/ApplicationConstruction
TechniqueCold Rolled
Hardness after quenching HRC64.5 HRC
Hardening Degree C940-980 Deg C
Tempering Degree C after Quenching100-600 Deg c
Coefficient of thermal expansionat Degree C20-700 Deg C
Soft annealing Degree C810 -850 Deg C
QuenchingOil, Air (up to 30 mm thickness)

We are offering 2080 Cold Work Round Bars to our clients.

Steel Properties:

  • P20+Ni is upgrade version of plastic mold steel 0f 2311, which normally supplied in Prehardened condition
  • Hardness in supplied condition is 280-320 HB
  • Additional nickel content of 1 % increases through hardening
  • It is micro-alloyed
  • Good machinability
  • Suitable for texturing
  • Outstanding Polishability
  • Corrosion resistance
  • Vacuum-degassed steel with the following excellent features.


Application:

P20 is equivalent grade of most popular steel grade of DIN 2738 which is applicable for large & small plastic mould dies for Automotive Industries, Dies for Domestic goods , High finishing plastic Die, Bolster Plates of Presses, Die Holders & Shoe blocks for drop Hammers, Press Cassettes , Upsetter Blocker, forging dies, Different dies & mold for plastic products etc.


Physical Properties:

Coefficient of Thermal Expansion at °C

10¯??? m / (m*K)

20-100

11.2

20-200

12.8

20-300

13.5

20-400

13.7

20-500

14.3

20-600

14.7

20-700

14.9

 

Thermal Conductivity at °C

W / (m*K)

20

35

350

34

700

33



Heat Treatment:

Soft Annealing °C

710-740

Cooling

Furnace

Hardness HB

max. 235

Hardening °C

840-870

Quenching

Polymer or Oil

Hardness after quenching HRC

51

 

Tempering°C after quenching

100

200

300

400

500

600

700

HRC

51.5

50.2

48

46.2

43

39

29


Price Range
:

  • Rs.140-180 per Kg
Yes! I am interested
Get CALLBACK

50CRV4 Steel Round Bar

50CRV4 Steel Round Bar
  • +9
 
Get Best Quote
Approx. Rs 85 / Kilogram
Get Latest Price
Product Brochure

Product Details:
Minimum Order Quantity200 Kilogram
Usage/ApplicationConstruction
Single Piece Length6 meter
Reduction RatioBillet size minimum 180 x 180
Spark and Spectral100% spark & spectral tested Material and free from mix up
ApplicationAutomobile Industry
MicrostructureFerrite and Pearlite
Diameter8 - 32 mm
ShapeRound
Hardness350 BHN max
Gas ContentN2-80PPM max, H2-2PPM max, O2-15PPM max

We are offering 50CRV4 SS Round Bar to our clients.

Chemical Composition - (Typical Analysis in %)

C

Cr

Mn

V

Si

P

S

0.47-0.55

0.80-1.20

0.70-1.10

0.15min

0.15-0.40

0.30max

0.30max


VENTURA EN47 Chromium Vanadium type spring steel supplied in the as rolled condition as well as spheroidized annealed condition. EN47 is suitable for oil hardening and tempering. When used in the oil hardened and tempered condition EN47 spring steel combines spring characteristics with good wear and abrasion resistance. When hardened EN47 offers excellent toughness and shock resistance which make it a suitable alloy spring steel for parts exposed to stress, shock andvibration.


Applications:

En47 steels, highlight the advantage is good hardenability, another hot working performance, comprehensive mechanical properties, decarburization resistance is also good big cross section of various important spring, such as automobile, locomotive, large plate spring, spring, etc. SUP10 Spring main used for heavy vehicles, tractors, industrial production load, stress and the diameter of the larger plate spring and helical spring. It is also used widely in the motor vehicle industry and many general engineering applications. Suitable for applications that require high tensile strength and toughness. Typical applications include crankshafts, steering knuckles, gears, spindles and pumps.


Forging:

Forge at 1050°C. Do not work this steel when it has fallen below 840°C.


Annealing:

Heat slowly to 820-840°C, soak well. Cool slowly in the furnace. (Our annealing is done in electric furnace to avoid decarburization.)


Hardening:

Pre heat slowly to 650/700°C and thoroughly soak. Continue heating to the final hardening temperature of 830/860°C and allow the component to be heated through. Quench in oil.


Tempering:

Temper the EN47 spring steel component immediately after quenching whilst tools are still handwarm. Re-heat to the tempering temperature then soak for one hour per 25 millimetre of total thickness (2 hours minimum) Cool in air. For most applications tempering of this grade will be between 400-600°C.


Heat Treatment:

Heat treatment temperatures, including rate of heating, cooling and soaking times etc. will vary due to factors such as the shape and size of each component. Other considerations during the heat treatment process include the type of furnace, quenching medium and workpiece transfer facilities. Please consult your heat treatment provider for full guidance on heat treatment of EN47.


Sizes Available:

20 x 20 mm, 22 x 22 mm, 25 x 25 mm, 25 x 60 mm, 28 x 28 mm, 28 x 36 mm, 32 x 32 mm, 36 x 36 mm, 36 x 45 mm, 55 x 55 mm, 40 x 40 mm, 45 x 45 mm, 45 x 55 mm

Yes! I am interested
Get CALLBACK

SKD61 Alloy Steel Round Bar

SKD61 Alloy Steel Round Bar
 
Get Best Quote
Approx. Rs 170 / Kg
Get Latest Price

Product Details:
Minimum Order Quantity200 Kg
Usage/ApplicationConstruction
Single Piece Length3 - 18 Meter
TechniqueHot Rolled
ShapeRounds
Thickness/Diameter10 - 500 mm
MaterialSS
Hardening Degree C1030-1060 Deg C
CoolingFurnace
Thermal Conductivity Degree C20-700 Deg C
Hardness HBmax 240
Hardness after quenching HRC55 HRC
Soft annealing Degree C760 - 810 Deg C

Chemical Composition - (Typical Analysis in %)

STANDARDS

X40CrMoV5

H13

DIN 2344

AISI H13

AFNOR Z40CDV5

JIS SKD61

 

C

Si

Mn

P

S

Cr

Mo

V

0.35-0.45

0.90-1.20

0.30-0.50

<0.03

<0.004

4.90-5.40

1.20-1.75

0.90-1.20


Ventura Alloy and Steels supplies and stocks H13 tool steel in flat, square and round bar. We provide steel in all sizes as your requirements. Consult our team who will assist you for any query related to H13 steel.


SAE AISI H13 steel equivalent with JIS SKD61, GB 4Cr5MoSiV1 and DIN 1.2344 Tool Steel. AISI H13 steel consists of chromium, molybdenum and vanadium and is known for its high hardenability and great toughness.


The molybdenum and vanadium act as strengthening agents while the chromium content helps the AISI H-13 tool steel to withstand softening when used at high temperatures. It also combines shock and abrasion resistance, has good red hardness, can resist rapid cooling and withstand premature heat checking.


H13 Tool Steel has high hot-wear resistance abilities along with great strength, heat conductivity and invulnerability to hot cracking. It has good resistance to abrasion at each low and high temperature. It displays high level of toughness and ductility. H13 has Uniform and high level of machinability and polish ability. It has high-temperature strength and resistance to thermal fatigue, glorious through-hardening properties and shows very limited distortion during hardening.

 

H3 ESR is the most purified material with the conventional VD route. The nature of material increase the strength, exceptionally increase the micro-cleanness level. H13 ESR is most refined, has greater homogeneity and an exceptionally fine structure, resulting in improved machinability, polishing & high temperature tensile strength. Exceptionally suggest the use of AISI-H13 ESR grade for Aluminum Pressure Die Casting and other part subjected to high working temperatures and high weight quality. H13 is completely ultrasonic examined with 100% positive outcomes according to NDT standards.

 

Steel Properties:

  • Great toughness

  • Thermal conductivity

  • High hot-wear resistance

  • Hot tensile strength

  • Insusceptible for hot cracking (Hot Crack resistant)

  • Can be water-cooled to a restricted degree

  • High Hardenability

Application:

This steel is especially used for ejector pins, tool holders and shrink work chucks. It is majorly widely utilized for manufacture of hot forging die & inserts, hot gripper dies, hot nut tools, hot header dies, brass forging and pressing dies, hot forging aluminum base dies, aluminum casting and extrusion dies, zinc die casting dies, extrusion mandrels, cores, die holder blocks, hot press dies, hot work punches, etc.

 

Yes! I am interested
Get CALLBACK

SKD61 Hot Die Steel Rods

SKD61 Hot Die Steel Rods
 
Get Best Quote
Approx. Rs 140 / Onwards
Get Latest Price

Product Details:
Minimum Order Quantity200 Onwards
Usage/ApplicationConstruction
Single Piece Length6 meter
TechniqueHot Rolled
ShapeRounds
Thickness/Diameter10 - 500 mm
Soft annealing Degree C760 - 810 Deg C
Thermal Conductivity Degree C20-700 Deg C
Hardening Degree C1030-1060 Deg C
Hardness HBMax 240
CoolingFurnace
Hardness after quenching HRC55 HRC

Chemical Composition - (Typical Analysis in %)

STANDARDS

X40CrMoV5

H13

DIN 2344

AISI H13

AFNOR Z40CDV5

JIS SKD61

 

C

Si

Mn

P

S

Cr

Mo

V

0.35-0.45

0.90-1.20

0.30-0.50

<0.03

<0.004

4.90-5.40

1.20-1.75

0.90-1.20


Ventura Alloy and Steels supplies and stocks H13 tool steel in flat, square and round bar. We provide steel in all sizes as your requirements. Consult our team who will assist you for any query related to H13 steel.


SAE AISI H13 steel equivalent with JIS SKD61, GB 4Cr5MoSiV1 and DIN 1.2344 Tool Steel. AISI H13 steel consists of chromium, molybdenum and vanadium and is known for its high hardenability and great toughness.


The molybdenum and vanadium act as strengthening agents while the chromium content helps the AISI H-13 tool steel to withstand softening when used at high temperatures. It also combines shock and abrasion resistance, has good red hardness, can resist rapid cooling and withstand premature heat checking.


H13 Tool Steel has high hot-wear resistance abilities along with great strength, heat conductivity and invulnerability to hot cracking. It has good resistance to abrasion at each low and high temperature. It displays high level of toughness and ductility. H13 has Uniform and high level of machinability and polish ability. It has high-temperature strength and resistance to thermal fatigue, glorious through-hardening properties and shows very limited distortion during hardening.

 

H3 ESR is the most purified material with the conventional VD route. The nature of material increase the strength, exceptionally increase the micro-cleanness level. H13 ESR is most refined, has greater homogeneity and an exceptionally fine structure, resulting in improved machinability, polishing & high temperature tensile strength. Exceptionally suggest the use of AISI-H13 ESR grade for Aluminum Pressure Die Casting and other part subjected to high working temperatures and high weight quality. H13 is completely ultrasonic examined with 100% positive outcomes according to NDT standards.

 

Steel Properties:

  • Great toughness

  • Thermal conductivity

  • High hot-wear resistance

  • Hot tensile strength

  • Insusceptible for hot cracking (Hot Crack resistant)

  • Can be water-cooled to a restricted degree

  • High Hardenability

Application:

This steel is especially used for ejector pins, tool holders and shrink work chucks. It is majorly widely utilized for manufacture of hot forging die & inserts, hot gripper dies, hot nut tools, hot header dies, brass forging and pressing dies, hot forging aluminum base dies, aluminum casting and extrusion dies, zinc die casting dies, extrusion mandrels, cores, die holder blocks, hot press dies, hot work punches, etc.

Yes! I am interested
Get CALLBACK

EN24 Alloy Steel Bar

EN24 Alloy Steel Bar
 
Get Best Quote
Approx. Rs 80 / KG
Get Latest Price

Product Details:
Minimum Order Quantity200 KG
Single Piece Length3 - 18 Meter
Usage/ApplicationConstruction
ShapeRound
Surface FinishPolished
MaterialAlloy Steel
Thickness/Diameter6 - 450 mm Dia.

As rolled and Spheroidized Annealed
Standard Grade C Mn P S Si Ni Cr Mo
ASTM A29 4340 0.38-0.43 0.60-0.80 0.035 max 0.040 max 0.15-0.35 1.65-2.00 0.70-0.90 0.20-0.30
EN 10250 36CrNiMo4 / 1.6511 0.32-0.40 0.50-0.80 0.035 max 0.035 max 0.40 max 0.90-1.20 0.90-1.2 0.15-0.30
BS 970 EN24 / 817M40 0.36-0.44 0.45-0.70 0.035 max 0.040 max 0.10-0.40 1.30-1.70 1.00-1.40 0.20-0.35
JIS G4103 SNCM 439 / SNCM 8 0.36-0.43 0.60-0.90 0.035 max 0.030 max 0.15-0.35 1.60-2.00 0.60-1.00 0.15-0.30

EN24 steel is a medium carbon, low alloy steel known for its toughness and strength in generally large sections. EN24 is likewise one kind of nickel chromium molybdenum steels. It can be supplied hardened and tempered in the tensile range of 930-1080 Mpa as well as annealed condition. Pre hardened and tempered EN24 steels can be further surface hardened by flame or induction hardening and by nitriding. EN24 steel is high tensile alloy steel famous for its excellent wear resistance properties and in addition to where high strength properties are required. This Grade is used in components affiliated to shafts, gears, studs and bolts. Its hardness is within the range of 248~302 HB.

Steel Properties:
  • Standard high-speed steel grade
  • Contains well-balanced alloy composition
  • High toughness
  • Great cutting edge retention

Physical Properties:
Thermal Conductivity at °C W / (m*K)
20 40.5
350 32.5
700 25.5


Heat Treatments:
Soft Annealing °C 650-700
Cooling Slowly
Hardness HB max. 280
Stress-relief Annealing °C 630-650
Cooling Furnace

1st Pre-Heating °C up to approx. 400 in an air-circulating furnace
2nd and 3rd 780 and 1000
Hardening °C 1190-1230
Quenching Salt Bath, at least 520°C Oil, Air
Tempering °C at least twice 530-560
Hardness after Temperature HRC 64-66

Price range: Rs.350 to 750 per kg
Yes! I am interested
Get CALLBACK

EN24 Steel Round Bars

EN24 Steel Round Bars
 
Get Best Quote
Approx. Rs 70 / Kilogram
Get Latest Price

Product Details:
Minimum Order Quantity200 Kilogram
Single Piece Length3 - 18 Meter
Usage/ApplicationConstruction
ShapeRound
Surface FinishPolished
MaterialAlloy Steel
Thickness/Diameter6 to 450 mm Dia.

As rolled and Spheroidized Annealed
StandardGradeCMnPSSiNiCrMo
ASTM A2943400.38-0.430.60-0.800.035 max0.040 max0.15-0.351.65-2.000.70-0.900.20-0.30
EN 1025036CrNiMo4 / 1.65110.32-0.400.50-0.800.035 max0.035 max0.40 max0.90-1.200.90-1.20.15-0.30
BS 970EN24 / 817M400.36-0.440.45-0.700.035 max0.040 max0.10-0.401.30-1.701.00-1.400.20-0.35
JIS G4103SNCM 439 / SNCM 80.36-0.430.60-0.900.035 max0.030 max0.15-0.351.60-2.000.60-1.000.15-0.30

EN24 steel is a medium carbon, low alloy steel known for its toughness and strength in generally large sections. EN24 is likewise one kind of nickel chromium molybdenum steels. It can be supplied hardened and tempered in the tensile range of 930-1080 Mpa as well as annealed condition. Pre hardened and tempered EN24 steels can be further surface hardened by flame or induction hardening and by nitriding. EN24 steel is high tensile alloy steel famous for its excellent wear resistance properties and in addition to where high strength properties are required. This Grade is used in components affiliated to shafts, gears, studs and bolts. Its hardness is within the range of 248~302 HB.

Steel Properties:
  • Standard high-speed steel grade
  • Contains well-balanced alloy composition
  • High toughness
  • Great cutting edge retention

Physical Properties:
Thermal Conductivity at °CW / (m*K)
2040.5
35032.5
70025.5


Heat Treatment:
Soft Annealing °C650-700
CoolingSlowly
Hardness HBmax. 280
Stress-relief Annealing °C630-650
CoolingFurnace

1st Pre-Heating °Cup to approx. 400 in an air-circulating furnace
2nd and 3rd780 and 1000
Hardening °C1190-1230
QuenchingSalt Bath, at least 520°C Oil, Air
Tempering °Cat least twice 530-560
Hardness after Temperature HRC64-66
Yes! I am interested
Get CALLBACK

En24 Steel Rod

En24 Steel Rod
 
Get Best Quote
Approx. Rs 150 / kg
Get Latest Price

Product Details:
Usage/ApplicationAs Per Requirement
ThicknessAs per requirement
GradeAs per requirement
MaterialAs per requirement
BrandAs per requirement
CarbonAs per requirement
CurrentAs per requirement
DiameterAs per requirement
ElongationAs per requirement
ImperialAs per requirement

Highly hardeanable steel (more than 36HNM) that does not show tempering brittleness, which enables to create very strong and ductile parts thick up to 150mm.

Additional Information:
  • Production Capacity: As per requirement
  • Delivery Time: As per requirement
  • Packaging Details: As per requirement
Yes! I am interested
Get CALLBACK

X38CRMOV5-1 Die Steel Round Bar

X38CRMOV5-1 Die Steel Round Bar
 
Get Best Quote
Approx. Rs 145 / Kg
Get Latest Price

Product Details:
Minimum Order Quantity200 Kg
ApplicationAutomobile Industry
Single Piece Length6 meter
ShapeRound
Length3 - 18 Meter
Hardness after quenching HRC54 HRC
CoolingFurnace
Diameter71 - 300 mm
Hardness HBmax 230
Hardening Degree C1000-1030 Deg C

Chemical Composition - (Typical Analysis in %)

STANDARDS

X37CrMoV5

H11

DIN 2343

AISI H11

AFNOR Z38CDV5

JIS SKD6


C

Si

Mn

P

S

Cr

Mo

V

0.33-0.41

0.80-1.00

0.25-0.50

0.003 max

0.030max

4.80-5.50

1.10-1.50

0.30-0.50


USA

Europe

Germany

China

Japan

India

R. of Korea

Russia

AISI / SAE

En

DIN, WNr

GB

JIS

IS

KS

GOST

H11

X37CrMoV5-1

X38CrMoV5-1

4Cr5MoSiV

SKD6

XT35Cr5Mo1V3

STD 6

4Ch5MFS


Ventura Alloy and Steels Supplies and Stocks AISI H11 tool steel is a 5% chromium hot work tool steel that is represented by its excellent impact toughness. Chromium hot-work tool steels are designated as group H steels according to the AISI classification system, and specified in ASTM A681 standard. The most commonly used chromium hot-work steels are H11 tool steel, H12 tool steel, and H13 steel, within the series from H1 to H19.


If we compare between H11 and H13, H11 tool steel consists of less vanadium than the commonly used H13 hot work tool steel. This gives H11 steels the higher toughness, with some reduction in wear resistance and tamper resistance. H11 tool steel is a deep-hardening, air-hardening steel and H11 alloy steel could be deep hardened by heat treatment and air-quenching. That gives minimal size change during heat treatment. H11 how work steel also has super resistance to thermal fatigue cracking and superb resistance to gross cracking and thermal shock when water cooled in service.


H11 steel is inclusive of all hot work tool steel with excellent rigidity and durability along with great thermal conductivity and invulnerability to hot cracking and can be water cooled to a constrained degree. H11 is primarily used for apparatus holders , ejector pins and shrink fit chucks.


Steel Properties:

  • Contains 5% Chromium

  • Greater strength

  • High toughness

  • Best thermal physical phenomenon

  • Resistant to hot cracking

  • Gives fundamental necessities to long tool life in press forging, die-casting, extrusion processes etc.


Application:

This grade isn't utilized for typical applications in the area of hot-work steels, yet additionally useful for tool holders, bridge kind tools, ejector pins, liner holders, hot work punches, forging dies, and shrink work chucks.

Yes! I am interested
Get CALLBACK

X40CRMOV5-1 Die Steel Round Bar

X40CRMOV5-1 Die Steel Round Bar
 
Get Best Quote
Approx. Rs 170 / Kg
Get Latest Price

Product Details:
Minimum Order Quantity200 Kg
ApplicationAutomobile Industry
Single Piece Length3 - 18 Meter
MaterialAlloy Steel
ShapeRound
CoolingFurnace
Soft annealing Degree C760 - 810 Deg C
Diameter10 to 500 mm
Hardness HBMax 240
Hardening Degree C1030-1060 Deg C
Thermal Conductivity Degree C20-700 Deg C
Hardness after quenching HRC55 HRC

We are offering X40CRMOV5-1 Die Steel Round Bar  to our clients.

Chemical Composition - (Typical Analysis in %)

STANDARDS

X40CrMoV5

H13

DIN 2344

AISI H13

AFNOR Z40CDV5

JIS SKD61

 

C

Si

Mn

P

S

Cr

Mo

V

0.35-0.45

0.90-1.20

0.30-0.50

<0.03

<0.004

4.90-5.40

1.20-1.75

0.90-1.20


Ventura Alloy and Steels supplies and stocks H13 tool steel in flat, square and round bar. We provide steel in all sizes as your requirements. Consult our team who will assist you for any query related to H13 steel.


SAE AISI H13 steel equivalent with JIS SKD61, GB 4Cr5MoSiV1 and DIN 1.2344 Tool Steel. AISI H13 steel consists of chromium, molybdenum and vanadium and is known for its high hardenability and great toughness.


The molybdenum and vanadium act as strengthening agents while the chromium content helps the AISI H-13 tool steel to withstand softening when used at high temperatures.


H13 Tool Steel has high hot-wear resistance abilities along with great strength, heat conductivity and invulnerability to hot cracking. It has good resistance to abrasion at each low and high temperature. It displays high level of toughness and ductility. H13 has Uniform and high level of machinability and polish ability. It has high-temperature strength and resistance to thermal fatigue, glorious through-hardening properties and shows very limited distortion during hardening.

 

H3 ESR is the most purified material with the conventional VD route. The nature of material increase the strength, exceptionally increase the micro-cleanness level. Exceptionally suggest the use of AISI-H13 ESR grade Aluminum Pressure Die Casting and other part subjected to high working temperatures and high weight quality. H13 is completely ultrasonic examined with 100% positive outcomes according to NDT standards.

 

Steel Properties:

  • Great toughness
  • Thermal conductivity
  • High hot-wear resistance
  • Hot tensile strength
  • Insusceptible for hot cracking (Hot Crack resistant)
  • Can be water-cooled to a restricted degree
  • High Hardenability


Application:

This steel is especially used for ejector pins, tool holders and shrink work chucks. It is majorly widely utilized for manufacture of hot forging die & inserts, hot gripper dies, hot nut tools, hot header dies, brass forging and pressing dies, hot forging aluminum base dies, aluminum casting and extrusion dies, zinc die casting dies, extrusion mandrels, cores, die holder blocks, hot press dies, hot work punches, etc.

 

Yes! I am interested
Get CALLBACK

4CR5MOSIV Hot Work Steel Bars

4CR5MOSIV Hot Work Steel Bars
 
Get Best Quote
Approx. Rs 145 / Kg
Get Latest Price

Product Details:
Minimum Order Quantity200 Kg
Usage/ApplicationConstruction
ShapeRound
Single Piece Length3 - 18 Meter
TechniqueHot Rolled
Thickness/Diameter60 to 1000 mm
Hardening Degree C1000 - 1030 Deg C
Hardness HBMax 230
CoolingFurnace
Soft annealing Degree C750 - 800 Deg C

We are offering 4CR5MOSIV Hot Work Stainless Steel Bars to our clients. Utilized as standard steel for manufacturing passes on of different kinds, press bites the dust, expulsion kicks the bucket, retainer plates, heavily clad trim bites the dust, hot shear sharpened pieces of steels and instrument holder.


Process Route

EAF+LF+VD+UPSET+FORGED+ANNEALED+ROUGH TURNED FOR ROUNDS/MILLED FOR FLATS+OIL QUENCHED AND DOUBLE TEMPERED+ROUGH TURNED FOR ROUNDS/MILLED FOR FLATS


Steel Properties :

The exceptional Hot Work Pre-solidified Steel has great toughness and high wear resistance. DB6 Steel is generally provided in hard, quenched, tempered and annealed condition in strengthened condition in exceptional cases. Normally it's working hardness is 360-430 BHN. This steel grade is the updated type of DIN 2713 for higher efficiency and performance.


Application:

Dies for Specially Drop and Close Die Forgings for Hammers & Mechanical Presses, Die Moulds, Shoe Blocks, Die Holder, Piston Rods, Bolster, Cranks, Cassettes, Plastic Moulds, Shearing Blades, Tools etc.

 

Yes! I am interested
Get CALLBACK

X155CRVMO12 Cold Work Steel Rods

X155CRVMO12 Cold Work Steel Rods
 
Get Best Quote
Approx. Rs 200 / Kg
Get Latest Price

Product Details:
Minimum Order Quantity200 Kg
Single Piece Length3 - 18 Meter
TechniqueCold Rolled
ApplicationConstruction, Automobile Industry
Diameter20 to 450 mm
Stress relief annealing Degree CApprox 660 -710 Deg C
Hardness HBMax 250
CoolingFurnace
Soft annealing Degree C840-870 Deg C
Hardness after quenching HRC63 HRC

We are offering X155CRVMO12 Cold Work Stainless Steel Rods to our clients.

Chemical Composition - (Typical Analysis in %)

STANDARDS

X153CrMoV12

HCHCR-D2

DIN 2379

AISI D2

AFNOR Z160CDV12

JIS SKD10


C

Si

Mn

P

S

Cr

Mo

V

1.40-1.60

0.10-0.60

0.20-0.60

0.030max

0.030max

11.00-13.00

0.70-1.00

0.80-1.20


Ventura Alloy and Steels Supplies and Stocks HCHCR D2 in India and abroad. D2 steel is an air hardening, high-carbon, high-chromium tool steel. It has high wear and abrasion resistant properties. It is heat treatable and will offer a hardness in the range 55-62 HRC, and is machinable in the annealed condition. It tends to be used as threading rolls and dies, icy trimming, cutting & stamping tools for sheet thickness up to 6mm, accuracy cutting instruments for sheet thicknesses up to 12 mm.

Steel Properties:

  • High Carbon High Chromium contents.
  • High wear resistant and toughness due to Vanadium addition of 0.90%.
  • Supply condition is an Annealed which offer hardness to reach 57-59 HRC.
  • Machinable in annealed condition.
  • Better steel than D3 due to high alloy properties.


Application:

HCHCR D2 tool steel can be utilized for cold stamping or forming dies, cold forming rolls, slitters, shear blades, tools, tyre shredders, chipper knives, punches, trimming, cutting threading dies, stamping tools and more.


Physical Properties:

Coefficient of Thermal Expansion at °C

10-??? m / (m*K)

20-100

10.6

20-200

11.5

20-300

11.8

20-400

12.3

 

Thermal Conductivity at °C

W / (m*K)

20

16.7

350

20.5

700

24.2

 

Heat Treatment:

Soft Annealing °C

840-870

Cooling

Furnace

Hardness HB

max. 250

Stress-relief Annealing °C

approx. 660-710

Hardening °C

1000-1050

Quenching

Air, Oil, Salt Bath 500-550°C

Hardness after quenching HRC

63

 

Tempering°C after quenching

100

200

300

400

500

525

550

600

HRC

64

61.5

58.5

58.5

59

60

57

50

 

Yes! I am interested
Get CALLBACK

2714 Steel Round Bars

2714 Steel Round Bars
 
Get Best Quote
Approx. Rs 150 / Kilogram
Get Latest Price

Product Details:
Minimum Order Quantity200 Kilogram
Usage/ApplicationConstruction
Single Piece Length3 - 18 Meter
TechniqueHot Rolled
ShapeRounds
Hardness after quenching HRC55-57 HRC
Hardness HBMax 240
Hardening Degree C840-900 Deg C
CoolingFurnace
Thickness/Diameter60 - 1000 mm

We are manufacturer and supplier Of 2714 Steel Round Bars.


Chemical Composition - (Typical Analysis in %)

STANDARDS

55NiCrMoV7

DB6

DIN 2714

AISI L6

AFNOR 55NCDVV7

JIS SKT4

 

C

Si

Mn

P

S

Cr

Ni

Mo

V

0.50-0.60

0.10-0.40

0.65-0.95

<0.015

<0.004

1.0-1.20

1.50-1.80

0.45-0.55

0.07-0.12

 

USA

Europe

Germany

China

Japan

India

R. of Korea

Russia

AISI / SAE

En

DIN, WNr

GB

JIS

IS

KS

GOST

A681 L6

55NiCrMoV7

56NiCrMoV7

5CrNiMo

SKT4

T55Ni7Cr4Mo5V1

STF4

4ChMNFS

 

Ventura Alloy and Steels Stocks and Supplies Die Block Steels DB6 / 2714 in India and abroad. DB6 Steel is an extreme pass on steel with high treating resistance and great through-solidifying properties. Its nickel substance has it uncommonly effect safe – a highly recommendable element for vast mallet & press bites the dust alike. This evaluation is generally supplied in toughened condition or extinguished and tempered to 1300 N/mm² & a working hardness of 370 to 410 HB (round) or 355 to 400 HB (square, level).

Utilized as standard steel for manufacturing passes on of different kinds, press bites the dust, expulsion kicks the bucket, retainer plates, heavily clad trim bites the dust, hot shear sharpened pieces of steels and instrument holder.


Utilized as standard steel for manufacturing passes on of different kinds, press bites the dust, expulsion kicks the bucket, retainer plates, heavily clad trim bites the dust, hot shear sharpened pieces of steels and instrument holder.

 

Process Route:

Eaf+Lf+Vd+Upset+Forged+Annealed+Rough Turned For Rounds/Milled For Flats+Oil Quenched And Double Tempered+ Rough Turned For Rounds/Milled For Flats


Steel Properties:
The special Hot Work Pre-hardened Steel has great toughness and high wear resistance. DB6 Steel is generally supplied in hard, quenched, tempered and also in annealed condition in special cases. Usually it's working hardness is 360-430 BHN. This steel grade is the upgraded version of DIN 2713 for greater efficiency and performance.


Application:
Dies for Specially Drop and Close Die Forgings for Hammers & Mechanical Presses, Die Moulds, Shoe Blocks, Die Holder, Cassettes, Piston Rods, Cranks, Boaster, Shearing Blades, Tools, Plastic Moulds etc.

Yes! I am interested
Get CALLBACK

EN24 Flat Steel Bars

EN24 Flat Steel Bars
 
Get Best Quote
Approx. Rs 80 / Kg
Get Latest Price

Product Details:
Minimum Order Quantity200 Kg
Material GradeEN24
Single Piece Length3 - 18 Meter
Usage/ApplicationConstruction
ShapeRound
Surface FinishPolished
MaterialAlloy Steel
Thickness/Diameter6 - 450 mm Dia.

As rolled and Spheroidized Annealed
Standard Grade C Mn P S Si Ni Cr Mo
ASTM A29 4340 0.38-0.43 0.60-0.80 0.035 max 0.040 max 0.15-0.35 1.65-2.00 0.70-0.90 0.20-0.30
EN 10250 36CrNiMo4 / 1.6511 0.32-0.40 0.50-0.80 0.035 max 0.035 max 0.40 max 0.90-1.20 0.90-1.2 0.15-0.30
BS 970 EN24 / 817M40 0.36-0.44 0.45-0.70 0.035 max 0.040 max 0.10-0.40 1.30-1.70 1.00-1.40 0.20-0.35
JIS G4103 SNCM 439 / SNCM 8 0.36-0.43 0.60-0.90 0.035 max 0.030 max 0.15-0.35 1.60-2.00 0.60-1.00 0.15-0.30

EN24 steel is a medium carbon, low alloy steel known for its toughness and strength in generally large sections. EN24 is likewise one kind of nickel chromium molybdenum steels. It can be supplied hardened and tempered in the tensile range of 930-1080 Mpa as well as annealed condition. Pre hardened and tempered EN24 steels can be further surface hardened by flame or induction hardening and by nitriding. EN24 steel is high tensile alloy steel famous for its excellent wear resistance properties and in addition to where high strength properties are required. This Grade is used in components affiliated to shafts, gears, studs and bolts. Its hardness is within the range of 248~302 HB.

Steel Properties:
  • Standard high-speed steel grade
  • Contains well-balanced alloy composition
  • High toughness
  • Great cutting edge retention

Physical Properties:
Thermal Conductivity at °C W / (m*K)
20 40.5
350 32.5
700 25.5

Heat Properties:
Soft Annealing °C 650-700
Cooling Slowly
Hardness HB max. 280
Stress-relief Annealing °C 630-650
Cooling Furnace

1st Pre-Heating °C up to approx. 400 in an air-circulating furnace
2nd and 3rd 780 and 1000
Hardening °C 1190-1230
Quenching Salt Bath, at least 520°C Oil, Air
Tempering °C at least twice 530-560
Hardness after Temperature HRC 64-66

Price range: Rs.85 to 110 per kg
Yes! I am interested
Get CALLBACK

DB6 Hot Die Steel Rods

DB6 Hot Die Steel Rods
 
Get Best Quote
Approx. Rs 150 / Kg
Get Latest Price

Product Details:
Minimum Order Quantity200 Kg
Single Piece Length3 - 18 Meter
Usage/ApplicationConstruction
Surface FinishGalvanized
ShapeRounds
Thickness/Diameter60 - 1000 mm
TechniqueHot Rolled
Hardening Degree C840 - 900 Deg C
CoolingFurnace
Hardness after quenching HRC55 - 57 HRC
Hardness HBMax 240

We are manufacturer and supplier Of DB6 Hot Die Steel Rods.


Chemical Composition - (Typical Analysis in %)

STANDARDS

55NiCrMoV7

DB6

DIN 2714

AISI L6

AFNOR 55NCDVV7

JIS SKT4

 

C

Si

Mn

P

S

Cr

Ni

Mo

V

0.50-0.60

0.10-0.40

0.65-0.95

<0.015

<0.004

1.0-1.20

1.50-1.80

0.45-0.55

0.07-0.12

 

USA

Europe

Germany

China

Japan

India

R. of Korea

Russia

AISI / SAE

En

DIN, WNr

GB

JIS

IS

KS

GOST

A681 L6

55NiCrMoV7

56NiCrMoV7

5CrNiMo

SKT4

T55Ni7Cr4Mo5V1

STF4

4ChMNFS

 

Ventura Alloy and Steels Stocks and Supplies Die Block Steels DB6 / 2714 in India and abroad. DB6 Steel is an extreme pass on steel with high treating resistance and great through-solidifying properties. Its nickel substance has it uncommonly effect safe – a highly recommendable element for vast mallet & press bites the dust alike. This evaluation is generally supplied in toughened condition or extinguished and tempered to 1300 N/mm² & a working hardness of 370 to 410 HB (round) or 355 to 400 HB (square, level).

Utilized as standard steel for manufacturing passes on of different kinds, press bites the dust, expulsion kicks the bucket, retainer plates, heavily clad trim bites the dust, hot shear sharpened pieces of steels and instrument holder.

Utilized as standard steel for manufacturing passes on of different kinds, press bites the dust, expulsion kicks the bucket, retainer plates, heavily clad trim bites the dust, hot shear sharpened pieces of steels and instrument holder.

 

Process Route:

Eaf+Lf+Vd+Upset+Forged+Annealed+Rough Turned For Rounds/Milled For Flats+Oil Quenched And Double Tempered+ Rough Turned For Rounds/Milled For Flats


Steel Properties:
The special Hot Work Pre-hardened Steel has great toughness and high wear resistance. DB6 Steel is generally supplied in hard, quenched, tempered and also in annealed condition in special cases. Usually it's working hardness is 360-430 BHN. This steel grade is the upgraded version of DIN 2713 for greater efficiency and performance.


Application:
Dies for Specially Drop and Close Die Forgings for Hammers & Mechanical Presses, Die Moulds, Shoe Blocks, Die Holder, Cassettes, Piston Rods, Cranks, Boaster, Shearing Blades, Tools, Plastic Moulds etc.


Yes! I am interested
Get CALLBACK

D2 Cold Work Steel Round Bars

D2 Cold Work Steel Round Bars
 
Get Best Quote
Approx. Rs 200 / Kilogram
Get Latest Price

Product Details:
Minimum Order Quantity200 Kilogram
Usage/ApplicationConstruction
ShapeRound
Single Piece Length6 meter
TechniqueCold Rolled
Stress relief annealing CApprox 660-710
CoolingFurnace
Hardness after quenching HRC63 HRC
Hardening Degree C1000-1050 Deg C
QuenchingAir, Oil or Salt Bath, 500-550 Degree C
Thickness/Diameter20 to 450 mm

Chemical Composition - (Typical Analysis in %)

STANDARDS

X153CrMoV12

HCHCR-D2

DIN 2379

AISI D2

AFNOR Z160CDV12

JIS SKD10


C

Si

Mn

P

S

Cr

Mo

V

1.40-1.60

0.10-0.60

0.20-0.60

0.030max

0.030max

11.00-13.00

0.70-1.00

0.80-1.20


Ventura Alloy and Steels Supplies and Stocks HCHCR D2 in India and abroad. D2 steel is an air hardening, high-carbon, high-chromium tool steel. It has high wear and abrasion resistant properties. It is heat treatable and will offer a hardness in the range 55-62 HRC, and is machinable in the annealed condition. It tends to be used as threading rolls and dies, icy trimming, cutting & stamping tools for sheet thickness up to 6mm, accuracy cutting instruments for sheet thicknesses up to 12 mm.


Steel Properties:

  • High Carbon High Chromium contents.
  • High wear resistant and toughness due to Vanadium addition of 0.90%.
  • Supply condition is an Annealed which offer hardness to reach 57-59 HRC.
  • Machinable in annealed condition.
  • Better steel than D3 due to high alloy properties.


Application:

HCHCR D2 tool steel can be utilized for cold stamping or forming dies, cold forming rolls, slitters, shear blades, tools, tyre shredders, chipper knives, punches, trimming, cutting threading dies, stamping tools and more.


Physical Properties:

Coefficient of Thermal Expansion at °C

10-??? m / (m*K)

20-100

10.6

20-200

11.5

20-300

11.8

20-400

12.3

 

Thermal Conductivity at °C

W / (m*K)

20

16.7

350

20.5

700

24.2



Heat Treatment:

Soft Annealing °C

840-870

Cooling

Furnace

Hardness HB

max. 250

Stress-relief Annealing °C

approx. 660-710

Hardening °C

1000-1050

Quenching

Air, Oil, Salt Bath 500-550°C

Hardness after quenching HRC

63

 

Tempering°C after quenching

100

200

300

400

500

525

550

600

HRC

64

61.5

58.5

58.5

59

60

57

50



Price Range:

  • Rs.200-300 per Kg
Yes! I am interested
Get CALLBACK

40NICRMO84 Alloy Steel Round Bars

40NICRMO84 Alloy Steel Round Bars
 
Get Best Quote
Approx. Rs 70 / Kg
Get Latest Price

Product Details:
Minimum Order Quantity200 Kg
ApplicationConstruction
Single Piece Length3 - 18 Meter
Surface FinishPolished
MaterialAlloy Steel
Thickness/Diameter6 - 450 mm Dia.
ShapeRound

As rolled and Spheroidized Annealed
StandardGradeCMnPSSiNiCrMo
ASTM A2943400.38-0.430.60-0.800.035 max0.040 max0.15-0.351.65-2.000.70-0.900.20-0.30
EN 1025036CrNiMo4 / 1.65110.32-0.400.50-0.800.035 max0.035 max0.40 max0.90-1.200.90-1.20.15-0.30
BS 970EN24 / 817M400.36-0.440.45-0.700.035 max0.040 max0.10-0.401.30-1.701.00-1.400.20-0.35
JIS G4103SNCM 439 / SNCM 80.36-0.430.60-0.900.035 max0.030 max0.15-0.351.60-2.000.60-1.000.15-0.30

EN24 steel is a medium carbon, low alloy steel known for its toughness and strength in generally large sections. EN24 is likewise one kind of nickel chromium molybdenum steels. It can be supplied hardened and tempered in the tensile range of 930-1080 Mpa as well as annealed condition. Pre hardened and tempered EN24 steels can be further surface hardened by flame or induction hardening and by nitriding. EN24 steel is high tensile alloy steel famous for its excellent wear resistance properties and in addition to where high strength properties are required. This Grade is used in components affiliated to shafts, gears, studs and bolts. Its hardness is within the range of 248~302 HB.

Steel Properties:
  • Standard high-speed steel grade
  • Contains well-balanced alloy composition
  • High toughness
  • Great cutting edge retention

Physical Properties:
Thermal Conductivity at °CW / (m*K)
2040.5
35032.5
70025.5

Heat Treatment:
Soft Annealing °C650-700
CoolingSlowly
Hardness HBmax. 280
Stress-relief Annealing °C630-650
CoolingFurnace
1st Pre-Heating °Cup to approx. 400 in an air-circulating furnace
2nd and 3rd780 and 1000
Hardening °C1190-1230
QuenchingSalt Bath, at least 520°C Oil, Air
Tempering °Cat least twice 530-560
Hardness after Temperature HRC64-66
Yes! I am interested
Get CALLBACK

H13 Hot Die Steel Rods

H13 Hot Die Steel Rods
 
Get Best Quote
Approx. Rs 140 / Onwards
Get Latest Price

Product Details:
Minimum Order Quantity200 Onwards
Usage/ApplicationConstruction
Single Piece Length3 - 18 Meter
TechniqueHot Rolled
ShapeRound
Thickness/Diameter10 to 500 mm
Hardness after quenching HRC55 HRC
Soft annealing Degree C760 - 810 Deg C
CoolingFurnace
Thermal Conductivity Degree C20-700 Deg C
Hardness HBMax 240
Tempering Degree C100-700 Deg C

We are offering H13 Hot Die Stainless Steel Rods to our clients.

Chemical Composition - (Typical Analysis in %)

STANDARDS

X40CrMoV5

H13

DIN 2344

AISI H13

AFNOR Z40CDV5

JIS SKD61

 

C

Si

Mn

P

S

Cr

Mo

V

0.35-0.45

0.90-1.20

0.30-0.50

<0.03

<0.004

4.90-5.40

1.20-1.75

0.90-1.20


Ventura Alloy and Steels supplies and stocks H13 tool steel in flat, square and round bar. We provide steel in all sizes as your requirements. Consult our team who will assist you for any query related to H13 steel.


SAE AISI H13 steel equivalent with JIS SKD61, GB 4Cr5MoSiV1 and DIN 1.2344 Tool Steel. AISI H13 steel consists of chromium, molybdenum and vanadium and is known for its high hardenability and great toughness.


The molybdenum and vanadium act as strengthening agents while the chromium content helps the AISI H-13 tool steel to withstand softening when used at high temperatures. It also combines shock and abrasion resistance, has good red hardness, can resist rapid cooling and withstand premature heat checking.


H13 Tool Steel has high hot-wear resistance abilities along with great strength, heat conductivity and invulnerability to hot cracking. It has good resistance to abrasion at each low and high temperature. It displays high level of toughness and ductility. H13 has Uniform and high level of machinability and polish ability. It has high-temperature strength and resistance to thermal fatigue, glorious through-hardening properties and shows very limited distortion during hardening.

 

H3 ESR is the most purified material with the conventional VD route. The nature of material increase the strength, exceptionally increase the micro-cleanness level. H13 ESR is most refined, has greater homogeneity and an exceptionally fine structure, resulting in improved machinability, polishing & high temperature tensile strength. Exceptionally suggest the use of AISI-H13 ESR grade for Aluminum Pressure Die Casting and other part subjected to high working temperatures and high weight quality. H13 is completely ultrasonic examined with 100% positive outcomes according to NDT standards.

 

Steel Properties:

  • Great toughness

  • Thermal conductivity

  • High hot-wear resistance

  • Hot tensile strength

  • Insusceptible for hot cracking (Hot Crack resistant)

  • Can be water-cooled to a restricted degree

  • High Hardenability

Application:

This steel is especially used for ejector pins, tool holders and shrink work chucks. It is majorly widely utilized for manufacture of hot forging die & inserts, hot gripper dies, hot nut tools, hot header dies, brass forging and pressing dies, hot forging aluminum base dies, aluminum casting and extrusion dies, zinc die casting dies, extrusion mandrels, cores, die holder blocks, hot press dies, hot work punches, etc.

Yes! I am interested
Get CALLBACK

Cold Rolled Steel Rods

Cold Rolled Steel Rods
 
Get Best Quote
Approx. Rs 143 / Onwards
Get Latest Price

Product Details:
Minimum Order Quantity1000 Onwards
Single Piece Length3 - 18 Meter
TechniqueCold Rolled
ApplicationAutomobile Industry, Construction
Hardness HBMax 230
Thermal Conductivity at Degree C20-700 Deg C
CoolingFurnace
FinishingPolished
Hardening Degree C78 - 820 Deg C
Diameter60 - 500 mm

Cold Work  Steel Rods having the high hardened ability and dimensional stability during the process of heat treatment. We provide high-quality products to our clients.
Yes! I am interested
Get CALLBACK

Hot Rolled Steel Round Bars

Hot Rolled Steel Round Bars
 
Get Best Quote
Approx. Rs 150 / Kg
Get Latest Price

Product Details:
Minimum Order Quantity200 Kg
ShapeRound
ApplicationConstruction, Automobile Industry, Pharmaceutical / Chemical Industry
Materialspring Steel
Hardness Tolerance3 HRC
Diameter60 to 1000 mm
CoolingFurnace
Hardening Degree C840-900 Deg C
Forging Ratio41
Hardness HBMax 240
Hardness after quenching HRC55-57 HRC

Ventura Alloy and Steels Stocks and Supplies Stainless Steel Round Bars in India and abroad. DB6 Steel is an extreme pass on steel with high treating resistance and great through-solidifying properties. Its nickel substance has it uncommonly effect safe – a highly recommendable element for vast mallet & press bites the dust alike. This evaluation is generally supplied in toughened condition or extinguished and tempered to 1300 N/mm² & a working hardness of 370 to 410 HB (round) or 355 to 400 HB (square, level).

Utilized as standard steel for manufacturing passes on of different kinds, press bites the dust, expulsion kicks the bucket, retainer plates, heavily clad trim bites the dust, hot shear sharpened pieces of steels and instrument holder.

Utilized as standard steel for manufacturing passes on of different kinds, press bites the dust, expulsion kicks the bucket, retainer plates, heavily clad trim bites the dust, hot shear sharpened pieces of steels and instrument holder.

 

Process Route:

Eaf+Lf+Vd+Upset+Forged+Annealed+Rough Turned For Rounds/Milled For Flats+Oil Quenched And Double Tempered+ Rough Turned For Rounds/Milled For Flats


Steel Properties:
The special Hot Work Pre-hardened Steel has great toughness and high wear resistance. DB6 Steel is generally supplied in hard, quenched, tempered and also in annealed condition in special cases. Usually it's working hardness is 360-430 BHN. This steel grade is the upgraded version of DIN 2713 for greater efficiency and performance.


Application:
Dies for Specially Drop and Close Die Forgings for Hammers & Mechanical Presses, Die Moulds, Shoe Blocks, Die Holder, Cassettes, Piston Rods, Cranks, Boaster, Shearing Blades, Tools, Plastic Moulds etc.

Yes! I am interested
Get CALLBACK

OHNS Cold Work Round Bar

OHNS Cold Work Round Bar
 
Get Best Quote
Approx. Rs 200 / Kg
Get Latest Price

Product Details:
Minimum Order Quantity1000 Kg
Usage/ApplicationConstruction
ShapeRound
Single Piece Length3 - 18 Meter
TechniqueCold Rolled
Thickness/Diameter60 to 1000 mm
CoolingFurnace
FinishingPolished
Tempering Degree C after Quenching100 - 600 Deg C
Hardening Degree C780 - 820 Deg C
Thermal Conductivity at Degree C20 - 700 Deg C

Our offered OHNS Cold Work Round Baris a very popular grade of through hardening alloy steel, which is readily machinable. Furthermore, this is capable of retaining good impact values at low temperatures.
Yes! I am interested
Get CALLBACK

Hot Work Steel Round Rods

Hot Work Steel Round Rods
 
Get Best Quote
Approx. Rs 150 / Kg
Get Latest Price

Product Details:
Minimum Order Quantity200 Kg
Usage/ApplicationConstruction
Single Piece Length18 meter
TechniqueHot Rolled
ShapeRounds
Thickness/Diameter60 - 1000 mm
CoolingFurnace
Hardness after quenching HRC55-57
Hardness HBMax. 240
Soft annealing Degree C650-710
Hardening Degree C840-900
QuenchingOil,Air
Thermal Conductivity Degree C20-700

We are offering Hot Work Steel Round Rods to our clients.

Chemical Composition - (Typical Analysis in %)

STANDARDS

55NiCrMoV7

DB6

DIN 2714

AISI L6

AFNOR 55NCDVV7

JIS SKT4

 

C

Si

Mn

P

S

Cr

Ni

Mo

V

0.50-0.60

0.10-0.40

0.65-0.95

<0.015

<0.004

1.0-1.20

1.50-1.80

0.45-0.55

0.07-0.12

 

USA

Europe

Germany

China

Japan

India

R. of Korea

Russia

AISI / SAE

En

DIN, WNr

GB

JIS

IS

KS

GOST

A681 L6

55NiCrMoV7

56NiCrMoV7

5CrNiMo

SKT4

T55Ni7Cr4Mo5V1

STF4

4ChMNFS

 

Ventura Alloy and Steels Stocks and Supplies Die Block Steels DB6 / 2714 in India and abroad. DB6 Steel is an extreme pass on steel with high treating resistance and great through-solidifying properties. Its nickel substance has it uncommonly effect safe – a highly recommendable element for vast mallet & press bites the dust alike. This evaluation is generally supplied in toughened condition or extinguished and tempered to 1300 N/mm² & a working hardness of 370 to 410 HB (round) or 355 to 400 HB (square, level).

Utilized as standard steel for manufacturing passes on of different kinds, press bites the dust, expulsion kicks the bucket, retainer plates, heavily clad trim bites the dust, hot shear sharpened pieces of steels and instrument holder.

 

Process Route:

Eaf+Lf+Vd+Upset+Forged+Annealed+Rough Turned For Rounds/Milled For Flats+Oil Quenched And Double Tempered+ Rough Turned For Rounds/Milled For Flats


Steel Properties:
The special Hot Work Pre-hardened Steel has great toughness and high wear resistance. DB6 Steel is generally supplied in hard, quenched, tempered and also in annealed condition in special cases. Usually it's working hardness is 360-430 BHN. This steel grade is the upgraded version of DIN 2713 for greater efficiency and performance.


Application:
Dies for Specially Drop and Close Die Forgings for Hammers & Mechanical Presses, Die Moulds, Shoe Blocks, Die Holder, Cassettes, Piston Rods, Cranks, Boaster, Shearing Blades, Tools, Plastic Moulds etc.


Yes! I am interested
Get CALLBACK

X40CRMOV5-1 Hot Rolled Steel Rods

X40CRMOV5-1 Hot Rolled Steel Rods
 
Get Best Quote
Approx. Rs 170 / Kg
Get Latest Price

Product Details:
Minimum Order Quantity200 Kg
Usage/ApplicationConstruction
Single Piece Length3 - 18 Meter
TechniqueHot Rolled
ShapeRounds
Thickness/Diameter10 - 500 mm
Hardness HBMax 240
CoolingFurnace
Soft annealing Degree C760 - 810 Deg C
Hardening Degree C1030-1060 Deg C
Hardness after quenching HRC55 HRC
Thermal Conductivity Degree C20-700 Deg C

We are offering X40CRMOV5-1 Stainless Stel Rodsto our clients.

Chemical Composition - (Typical Analysis in %)

STANDARDS

X40CrMoV5

H13

DIN 2344

AISI H13

AFNOR Z40CDV5

JIS SKD61

 

C

Si

Mn

P

S

Cr

Mo

V

0.35-0.45

0.90-1.20

0.30-0.50

<0.03

<0.004

4.90-5.40

1.20-1.75

0.90-1.20


Ventura Alloy and Steels supplies and stocks H13 tool steel in flat, square and round bar. We provide steel in all sizes as your requirements. Consult our team who will assist you for any query related to H13 steel.


SAE AISI H13 steel equivalent with JIS SKD61, GB 4Cr5MoSiV1 and DIN 1.2344 Tool Steel. AISI H13 steel consists of chromium, molybdenum and vanadium and is known for its high hardenability and great toughness.


The molybdenum and vanadium act as strengthening agents while the chromium content helps the AISI H-13 tool steel to withstand softening when used at high temperatures. It also combines shock and abrasion resistance, has good red hardness, can resist rapid cooling and withstand premature heat checking.


H13 Tool Steel has high hot-wear resistance abilities along with great strength, heat conductivity and invulnerability to hot cracking. It has good resistance to abrasion at each low and high temperature. It has high-temperature strength and resistance to thermal fatigue, glorious through-hardening properties and shows very limited distortion during hardening.

 

H3 ESR is the most purified material with the conventional VD route. The nature of material increase the strength, exceptionally increase the micro-cleanness level. Exceptionally suggest the use of AISI-H13 ESR grade for Aluminum Pressure Die Casting and other part subjected to high working temperatures and high weight quality. H13 is completely ultrasonic examined with 100% positive outcomes according to NDT standards.

 

Steel Properties:

· Great toughness

· Thermal conductivity

· High hot-wear resistance

· Hot tensile strength

· Insusceptible for hot cracking (Hot Crack resistant)

· Can be water-cooled to a restricted degree

· High Hardenability

Application:

This steel is especially used for ejector pins, tool holders and shrink work chucks. It is majorly widely utilized for manufacture of hot forging die & inserts, hot gripper dies, hot nut tools, hot header dies, brass forging and pressing dies, hot forging aluminum base dies, aluminum casting and extrusion dies, zinc die casting dies, extrusion mandrels, cores, die holder blocks, hot press dies, hot work punches, etc.

Size Range:

ROUNDS - 10 to 500 MM DIA

FLATS - Thickness - 20 to 400 MM MAX | Width - 40 to 700 MM MAX

Price Range:

Rs.150 to 230 per Kg

 


Stocking Partners:
We keep the materials from Germany and China.

Yes! I am interested
Get CALLBACK

SKT4 Hot Work Steel Round Bar

SKT4 Hot Work Steel Round Bar
 
Get Best Quote
Approx. Rs 150 / Kg
Get Latest Price

Product Details:
Minimum Order Quantity200 Kg
Usage/ApplicationConstruction
Single Piece Length3 - 18 Meter
TechniqueHot Rolled
ShapeRounds
Thickness/Diameter60 to 1000 mm
Hardening Degree C840 - 900 Deg C
Coefficient of thermal expansionat Degree C20-700 Deg C
Hardness HBMax 240
Hardness after quenching HRC55 - 57 HRC
CoolingFurnace
Soft annealing Degree C650-710 Deg C

Chemical Composition - (Typical Analysis in %)

STANDARDS

55NiCrMoV7

DB6

DIN 2714

AISI L6

AFNOR 55NCDVV7

JIS SKT4

 

C

Si

Mn

P

S

Cr

Ni

Mo

V

0.50-0.60

0.10-0.40

0.65-0.95

<0.015

<0.004

1.0-1.20

1.50-1.80

0.45-0.55

0.07-0.12

 

USA

Europe

Germany

China

Japan

India

R. of Korea

Russia

AISI / SAE

En

DIN, WNr

GB

JIS

IS

KS

GOST

A681 L6

55NiCrMoV7

56NiCrMoV7

5CrNiMo

SKT4

T55Ni7Cr4Mo5V1

STF4

4ChMNFS

 

Ventura Alloy and Steels Stocks and Supplies Die Block Steels DB6 / 2714 in India and abroad. DB6 Steel is an extreme pass on steel with high treating resistance and great through-solidifying properties. Its nickel substance has it uncommonly effect safe – a highly recommendable element for vast mallet & press bites the dust alike. This evaluation is generally supplied in toughened condition or extinguished and tempered to 1300 N/mm² & a working hardness of 370 to 410 HB (round) or 355 to 400 HB (square, level).

Utilized as standard steel for manufacturing passes on of different kinds, press bites the dust, expulsion kicks the bucket, retainer plates, heavily clad trim bites the dust, hot shear sharpened pieces of steels and instrument holder.


Process Route

EAF+LF+VD+UPSET+FORGED+ANNEALED+ROUGH TURNED FOR ROUNDS/MILLED FOR FLATS+OIL QUENCHED AND DOUBLE TEMPERED+ROUGH TURNED FOR ROUNDS/MILLED FOR FLATS


Steel Properties:

The exceptional Hot Work Pre-solidified Steel has great toughness and high wear resistance. DB6 Steel is generally provided in hard, quenched, tempered and annealed condition in strengthened condition in exceptional cases. Normally it's working hardness is 360-430 BHN. This steel grade is the updated type of DIN 2713 for higher efficiency and performance.


Application:

Dies for Specially Drop and Close Die Forgings for Hammers & Mechanical Presses, Die Moulds, Shoe Blocks, Die Holder, Piston Rods, Bolster, Cranks, Cassettes, Plastic Moulds, Shearing Blades, Tools etc.

 

Yes! I am interested
Get CALLBACK

2343 Die Steel Round Bars

2343 Die Steel Round Bars
 
Get Best Quote
Approx. Rs 145 / Kg
Get Latest Price

Product Details:
Minimum Order Quantity200 Kg
ApplicationAutomobile Industry
Single Piece Length3 - 18 Meter
TechniqueHot Rolled
ShapeRound
Diameter71 - 300 mm
MaterialSpring Steel
Hardness HBMax 230
Hardening Degree C1000-1030 Deg C
Hardness after quenching HRC54 HRC
CoolingFurnace

We are offering 2343 Die Steel Round Bars to our clients.

Chemical Composition - (Typical Analysis in %)

STANDARDS

X37CrMoV5

H11

DIN 2343

AISI H11

AFNOR Z38CDV5

JIS SKD6

 

C

Si

Mn

P

S

Cr

Mo

V

0.33-0.41

0.80-1.00

0.25-0.50

0.003 max

0.030max

4.80-5.50

1.10-1.50

0.30-0.50

 

USA

Europe

Germany

China

Japan

India

R. of Korea

Russia

AISI / SAE

En

DIN, WNr

GB

JIS

IS

KS

GOST

H11

X37CrMoV5-1

X38CrMoV5-1

4Cr5MoSiV

SKD6

XT35Cr5Mo1V3

STD 6

4Ch5MFS

 

Ventura Alloy and Steels Supplies and Stocks AISI H11 tool steel is a 5% chromium hot work tool steel that is represented by its excellent impact toughness. The most commonly used chromium hot-work steels are H11 tool steel, and H13 steel, within the series from H1 to H19.


If we compare between H11 and H13, H11 tool steel consists of less vanadium than the commonly used H13 hot work tool steel. This gives H11 steels the higher toughness, with some reduction in wear resistance and tamper resistance. H11 tool steel is a deep-hardening, air-hardening steel and H11 alloy steel could be deep hardened by heat treatment and air-quenching. That gives minimal size change during heat treatment. H11 how work steel also has super resistance to thermal fatigue cracking and superb resistance to gross cracking and thermal shock when water cooled in service.


H11 steel is inclusive of all hot work tool steel with excellent rigidity and durability along with great thermal conductivity and invulnerability to hot cracking and can be water cooled to a constrained degree. H11 is primarily used for apparatus holders ,ejector pins and shrink fit chucks.


Steel Properties:

  • Contains 5% Chromium
  • Greater strength
  • High toughness
  • Best thermal physical phenomenon
  • Resistant to hot cracking
  • Gives fundamental necessities to long tool life in press forging, die-casting, extrusion processes etc.


Application:

This grade isn't utilized for typical applications in the area of hot-work steels, yet additionally useful for tool holders, bridge kind tools, ejector pins, liner holders, hot work punches, forging dies, and shrink work chucks.

    Yes! I am interested
    Get CALLBACK

    Hot Work Round Bar

    Hot Work Round Bar
     
    Get Best Quote
    Approx. Rs 150 / Kilogram
    Get Latest Price

    Product Details:
    Minimum Order Quantity200 Kilogram
    ShapeRound
    Single Piece Length3 - 18 Meter
    TechniqueCold Rolled
    ApplicationConstruction, Automobile Industry
    Thickness/Diameter60 to 1000 mm
    Yield StrengthCorresponding to Tensile 1100 N/mm2 Minimum
    Forging Ratio4 1
    Tensile StrengthCorresponding to Hardness 1220 -1390 N/mm2
    Soft annealing Degree C650 - 710 Deg C
    Hardness Tolerance3 HRC
    Diameter Tolerance0 /+10 mm ( max ) But aim 5 mm
    Standard Width Available mm160 - 610 mm
    Standard Thickness Available mm126 - 458 mm

    Ventura Alloy and Steels Stocks and Supplies Hot Work Round Bar in India and abroad. DB6 Steel is an extreme pass on steel with high treating resistance and great through-solidifying properties. Its nickel substance has it uncommonly effect safe – a highly recommendable element for vast mallet & press bites the dust alike. This evaluation is generally supplied in toughened condition or extinguished and tempered to 1300 N/mm² & a working hardness of 370 to 410 HB (round) or 355 to 400 HB (square, level).

    Utilized as standard steel for manufacturing passes on of different kinds, press bites the dust, expulsion kicks the bucket, retainer plates, heavily clad trim bites the dust, hot shear sharpened pieces of steels and instrument holder.

    Utilized as standard steel for manufacturing passes on of different kinds, press bites the dust, expulsion kicks the bucket, retainer plates, heavily clad trim bites the dust, hot shear sharpened pieces of steels and instrument holder.


    Process Route:

    Eaf+Lf+Vd+Upset+Forged+Annealed+Rough Turned For Rounds/Milled For Flats+Oil Quenched And Double Tempered+ Rough Turned For Rounds/Milled For Flats


    Steel Properties:
    The special Hot Work Pre-hardened Steel has great toughness and high wear resistance. DB6 Steel is generally supplied in hard, quenched, tempered and also in annealed condition in special cases. Usually it's working hardness is 360-430 BHN. This steel grade is the upgraded version of DIN 2713 for greater efficiency and performance.


    Application:
    Dies for Specially Drop and Close Die Forgings for Hammers & Mechanical Presses, Die Moulds, Shoe Blocks, Die Holder, Cassettes, Piston Rods, Cranks, Boaster, Shearing Blades, Tools, Plastic Moulds etc.

    Yes! I am interested
    Get CALLBACK

    2379 Cold Work Steel Rods

    2379 Cold Work Steel Rods
     
    Get Best Quote
    Approx. Rs 200 / Kilogram
    Get Latest Price

    Product Details:
    Minimum Order Quantity200 Kilogram
    TechniqueCold Rolled
    ApplicationAutomobile Industry, Construction
    Size/Diameter20 to 450 mm
    Single Piece Length6 meter, 18 meter, 3 meter
    Coefficient of thermal expansion at Degree C20-400 Deg c
    Hardness HBMax 250
    Hardness after quenching HRC63 HRC
    Hardening Degree C1000-1050 Deg C
    Soft annealing Degree C840-870 Deg C

    Chemical Composition - (Typical Analysis in %)

    STANDARDS

    X153CrMoV12

    HCHCR-D2

    DIN 2379

    AISI D2

    AFNOR Z160CDV12

    JIS SKD10


    C

    Si

    Mn

    P

    S

    Cr

    Mo

    V

    1.40-1.60

    0.10-0.60

    0.20-0.60

    0.030max

    0.030max

    11.00-13.00

    0.70-1.00

    0.80-1.20


    Ventura Alloy and Steels Supplies and Stocks HCHCR D2 in India and abroad. D2 steel is an air hardening, high-carbon, high-chromium tool steel. It has high wear and abrasion resistant properties. It is heat treatable and will offer a hardness in the range 55-62 HRC, and is machinable in the annealed condition. It tends to be used as threading rolls and dies, icy trimming, cutting & stamping tools for sheet thickness up to 6mm, accuracy cutting instruments for sheet thicknesses up to 12 mm.

    Steel Properties:

    • High Carbon High Chromium contents.
    • High wear resistant and toughness due to Vanadium addition of 0.90%.
    • Supply condition is an Annealed which offer hardness to reach 57-59 HRC.
    • Machinable in annealed condition.
    • Better steel than D3 due to high alloy properties.


    Application:

    HCHCR D2 tool steel can be utilized for cold stamping or forming dies, cold forming rolls, slitters, shear blades, tools, tyre shredders, chipper knives, punches, trimming, cutting threading dies, stamping tools and more.


    Physical Properties:

    Coefficient of Thermal Expansion at °C

    10-??? m / (m*K)

    20-100

    10.6

    20-200

    11.5

    20-300

    11.8

    20-400

    12.3

     

    Thermal Conductivity at °C

    W / (m*K)

    20

    16.7

    350

    20.5

    700

    24.2



    Heat Treatment:

    Soft Annealing °C

    840-870

    Cooling

    Furnace

    Hardness HB

    max. 250

    Stress-relief Annealing °C

    approx. 660-710

    Hardening °C

    1000-1050

    Quenching

    Air, Oil, Salt Bath 500-550°C

    Hardness after quenching HRC

    63

     

    Tempering°C after quenching

    100

    200

    300

    400

    500

    525

    550

    600

    HRC

    64

    61.5

    58.5

    58.5

    59

    60

    57

    50

     

    Yes! I am interested
    Get CALLBACK

    En19 Alloy Steel Round Bar

    En19 Alloy Steel Round Bar
    • +1
     
    Get Best Quote
    Approx. Rs 80 / kg
    Get Latest Price
    Product Brochure

    Product Details:
    Thickness/DiameterAll Available
    ShapeAll Shapes Available
    BrandVentura Alloy And Steel Private Limited
    Single Piece LengthAll length Available
    Material GradeAs per your requirement
    Surface FinishAll finish Available
    Usage/ApplicationAll uses
    MaterialAs per your requirement
    SizeAs Per Your Requirement
    Delivery Details3-5 days

    en19 round bar is a high quality alloy steel with tensile strength. en19 rod is suitable for applications with very high loading such as engine gear boxes, With a combination of good ductility and shock resistance
    Yes! I am interested
    Get CALLBACK

    SKD6 Alloy Steel Round Rods

    SKD6 Alloy Steel Round Rods
     
    Get Best Quote
    Approx. Rs 145 / Kg
    Get Latest Price

    Product Details:
    Minimum Order Quantity200 Kg
    Single Piece Length3 - 18 Meter
    ApplicationAutomobile Industry
    ShapeRounds
    Hardness after quenching HRC54 HRC
    CoolingFurnace
    Coefficient of thermal expansionat Degree C20-700 Deg C
    Hardness HBMax 230
    Soft annealing Degree C750 - 800 Deg C
    Stress relief annealing Degree CApprox 600 - 650 Deg C
    Diameter71 - 300 mm
    Hardening Degree C1000-1030 Deg C

    We are offering SKD6 SS Round Rods to our clients.

    Chemical Composition - (Typical Analysis in %)

    STANDARDS

    X37CrMoV5

    H11

    DIN 2343

    AISI H11

    AFNOR Z38CDV5

    JIS SKD6


    C

    Si

    Mn

    P

    S

    Cr

    Mo

    V

    0.33-0.41

    0.80-1.00

    0.25-0.50

    0.003 max

    0.030max

    4.80-5.50

    1.10-1.50

    0.30-0.50


    USA

    Europe

    Germany

    China

    Japan

    India

    R. of Korea

    Russia

    AISI / SAE

    En

    DIN, WNr

    GB

    JIS

    IS

    KS

    GOST

    H11

    X37CrMoV5-1

    X38CrMoV5-1

    4Cr5MoSiV

    SKD6

    XT35Cr5Mo1V3

    STD 6

    4Ch5MFS


    Ventura Alloy and Steels Supplies and Stocks AISI H11 tool steel is a 5% chromium hot work tool steel that is represented by its excellent impact toughness. Chromium hot-work tool steels are designated as group H steels according to the AISI classification system, and specified in ASTM A681 standard. The most commonly used chromium hot-work steels are H11 tool steel, H12 tool steel, and H13 steel, within the series from H1 to H19.


    If we compare between H11 and H13, H11 tool steel consists of less vanadium than the commonly used H13 hot work tool steel. This gives H11 steels the higher toughness. That gives minimal size change during heat treatment. H11 how work steel also has super resistance to thermal fatigue cracking and superb resistance to gross cracking and thermal shock when water cooled in service.


    H11 steel is inclusive of all hot work tool steel with excellent rigidity and durability along with great thermal conductivity and invulnerability to hot cracking and can be water cooled to a constrained degree. H11 is primarily used for apparatus holders , ejector pins and shrink fit chucks.

     

    Steel Properties:

    • Contains 5% Chromium
    • Greater strength
    • High toughness
    • Best thermal physical phenomenon
    • Resistant to hot cracking
    • Gives fundamental necessities to long tool life in press forging, die-casting, extrusion processes etc.


    Application:

    This grade isn't utilized for typical applications in the area of hot-work steels, yet additionally useful for tool holders, bridge kind tools, ejector pins, liner holders, hot work punches, forging dies, and shrink work chucks.


    Yes! I am interested
    Get CALLBACK

    SKD61 Hot Work Steel Rods

    SKD61 Hot Work Steel Rods
     
    Get Best Quote
    Approx. Rs 170 / Onwards
    Get Latest Price

    Product Details:
    Minimum Order Quantity200 Onwards
    Single Piece Length3 - 18 Meter
    TechniqueHot Rolled
    Length3 - 18 Meter
    MaterialSpring Steel
    ShapeRounds
    ApplicationConstruction, Automobile Industry
    Thickness/Diameter10 - 500 mm
    QuenchingAir,Oil or Saltbath,500 - 550 Degree C
    CoolingFurnace
    Thermal Conductivity Degree C20-700 Deg C
    Hardening degree C1030 - 1060 Deg C
    Hardness HBMax 240
    Coefficient of thermal expansionat Degree C20-700 Deg C
    Hardness after quenching HRC55 HRC
    Soft annealing Degree C760 - 810 Deg C
    Stress Relief Annealing Degree CApprox. 610-660 Deg C

    We are offering SKD61 Hot Work  Steel Rods to our clients.

    Chemical Composition - (Typical Analysis in %)

    STANDARDS

    X40CrMoV5

    H13

    DIN 2344

    AISI H13

    AFNOR Z40CDV5

    JIS SKD61

     

    C

    Si

    Mn

    P

    S

    Cr

    Mo

    V

    0.35-0.45

    0.90-1.20

    0.30-0.50

    <0.03

    <0.004

    4.90-5.40

    1.20-1.75

    0.90-1.20


    Ventura Alloy and Steels supplies and stocks H13 tool steel in flat, square and round bar. We provide steel in all sizes as your requirements. Consult our team who will assist you for any query related to H13 steel.


    SAE AISI H13 steel equivalent with JIS SKD61, GB 4Cr5MoSiV1 and DIN 1.2344 Tool Steel. AISI H13 steel consists of chromium, molybdenum and vanadium and is known for its high hardenability and great toughness.


    The molybdenum and vanadium act as strengthening agents while the chromium content helps the AISI H-13 tool steel to withstand softening when used at high temperatures.


    H13 Tool Steel has high hot-wear resistance abilities along with great strength, heat conductivity and invulnerability to hot cracking. It displays high level of toughness and ductility. H13 has Uniform and high level of machinability and polish ability. It has high-temperature strength and resistance to thermal fatigue, glorious through-hardening properties and shows very limited distortion during hardening.

     

    H3 ESR is the most purified material with the conventional VD route. The nature of material increase the strength, exceptionally increase the micro-cleanness level. Exceptionally suggest the use of AISI-H13 ESR grade for Aluminum Pressure Die Casting and other part subjected to high working temperatures and high weight quality. H13 is completely ultrasonic examined with 100% positive outcomes according to NDT standards.

     

    Steel Properties:

    • Great toughness
    • Thermal conductivity
    • High hot-wear resistance
    • Hot tensile strength
    • Insusceptible for hot cracking (Hot Crack resistant)
    • Can be water-cooled to a restricted degree
    • High Hardenability

     


    Application:

    This steel is especially used for ejector pins, tool holders and shrink work chucks. It is majorly widely utilized for manufacture of hot forging die & inserts, hot gripper dies, hot nut tools, hot header dies, brass forging and pressing dies, hot forging aluminum base dies, aluminum casting and extrusion dies, zinc die casting dies, extrusion mandrels, cores, die holder blocks, hot press dies, hot work punches, etc.

     



    Yes! I am interested
    Get CALLBACK

    X40CRMOV5-1 Hot Work Steel Round Bars

    X40CRMOV5-1 Hot Work Steel Round Bars
     
    Get Best Quote
    Approx. Rs 170 / Kg
    Get Latest Price

    Product Details:
    Minimum Order Quantity200 Kg
    Single Piece Length3 - 18 Meter
    Usage/ApplicationConstruction
    Surface FinishGalvanized
    ShapeRounds
    Thickness/Diameter10 - 500 mm
    TechniqueHot Rolled
    CoolingFurnace
    Hardness after quenching HRC55 HRC
    Hardening Degree C1030-1060 Deg C
    Hardness HBmax 240
    Soft annealing Degree C760 - 810 Deg C
    Thermal Conductivity Degree C20-700 Deg C

    Chemical Composition - (Typical Analysis in %)

    STANDARDS

    X40CrMoV5

    H13

    DIN 2344

    AISI H13

    AFNOR Z40CDV5

    JIS SKD61

     

    C

    Si

    Mn

    P

    S

    Cr

    Mo

    V

    0.35-0.45

    0.90-1.20

    0.30-0.50

    <0.03

    <0.004

    4.90-5.40

    1.20-1.75

    0.90-1.20


    Ventura Alloy and Steels supplies and stocks H13 tool steel in flat, square and round bar. We provide steel in all sizes as your requirements. Consult our team who will assist you for any query related to H13 steel.


    SAE AISI H13 steel equivalent with JIS SKD61, GB 4Cr5MoSiV1 and DIN 1.2344 Tool Steel. AISI H13 steel consists of chromium, molybdenum and vanadium and is known for its high hardenability and great toughness.


    The molybdenum and vanadium act as strengthening agents while the chromium content helps the AISI H-13 tool steel to withstand softening when used at high temperatures. It also combines shock and abrasion resistance, has good red hardness, can resist rapid cooling and withstand premature heat checking.


    H13 Tool Steel has high hot-wear resistance abilities along with great strength, heat conductivity and invulnerability to hot cracking. It has good resistance to abrasion at each low and high temperature. It displays high level of toughness and ductility. H13 has Uniform and high level of machinability and polish ability. It has high-temperature strength and resistance to thermal fatigue, glorious through-hardening properties and shows very limited distortion during hardening.

     

    H3 ESR is the most purified material with the conventional VD route. The nature of material increase the strength, exceptionally increase the micro-cleanness level. H13 ESR is most refined, has greater homogeneity and an exceptionally fine structure, resulting in improved machinability, polishing & high temperature tensile strength. Exceptionally suggest the use of AISI-H13 ESR grade for Aluminum Pressure Die Casting and other part subjected to high working temperatures and high weight quality. H13 is completely ultrasonic examined with 100% positive outcomes according to NDT standards.

     

    Steel Properties:

    • Great toughness

    • Thermal conductivity

    • High hot-wear resistance

    • Hot tensile strength

    • Insusceptible for hot cracking (Hot Crack resistant)

    • Can be water-cooled to a restricted degree

    • High Hardenability

    Application:

    This steel is especially used for ejector pins, tool holders and shrink work chucks. It is majorly widely utilized for manufacture of hot forging die & inserts, hot gripper dies, hot nut tools, hot header dies, brass forging and pressing dies, hot forging aluminum base dies, aluminum casting and extrusion dies, zinc die casting dies, extrusion mandrels, cores, die holder blocks, hot press dies, hot work punches, etc.

    Yes! I am interested
    Get CALLBACK

    H13 Die Steel Round Rods

    H13 Die Steel Round Rods
     
    Get Best Quote
    Approx. Rs 170 / Kg
    Get Latest Price

    Product Details:
    Minimum Order Quantity200 Kg
    ApplicationAutomobile Industry
    Single Piece Length3 - 18 Meter
    ShapeRound
    Hardness HBmax 240
    Diameter10 - 500 mm
    Soft annealing Degree C760 - 810 Deg C
    Hardness after quenching HRC55 HRC
    Hardening Degree C1030-1060 Deg C
    CoolingFurnace
    Thermal Conductivity Degree C20-700 Deg C

    Chemical Composition - (Typical Analysis in %)

    STANDARDS

    X40CrMoV5

    H13

    DIN 2344

    AISI H13

    AFNOR Z40CDV5

    JIS SKD61

     

    C

    Si

    Mn

    P

    S

    Cr

    Mo

    V

    0.35-0.45

    0.90-1.20

    0.30-0.50

    <0.03

    <0.004

    4.90-5.40

    1.20-1.75

    0.90-1.20


    Ventura Alloy and Steels supplies and stocks H13 tool steel in flat, square and round bar. We provide steel in all sizes as your requirements. Consult our team who will assist you for any query related to H13 steel.


    SAE AISI H13 steel equivalent with JIS SKD61, GB 4Cr5MoSiV1 and DIN 1.2344 Tool Steel. AISI H13 steel consists of chromium, molybdenum and vanadium and is known for its high hardenability and great toughness.


    The molybdenum and vanadium act as strengthening agents while the chromium content helps the AISI H-13 tool steel to withstand softening when used at high temperatures. It also combines shock and abrasion resistance, has good red hardness, can resist rapid cooling and withstand premature heat checking.


    H13 Tool Steel has high hot-wear resistance abilities along with great strength, heat conductivity and invulnerability to hot cracking. It has good resistance to abrasion at each low and high temperature. It displays high level of toughness and ductility. H13 has Uniform and high level of machinability and polish ability. It has high-temperature strength and resistance to thermal fatigue, glorious through-hardening properties and shows very limited distortion during hardening.

     

    H3 ESR is the most purified material with the conventional VD route. The nature of material increase the strength, exceptionally increase the micro-cleanness level. H13 ESR is most refined, has greater homogeneity and an exceptionally fine structure, resulting in improved machinability, polishing & high temperature tensile strength. Exceptionally suggest the use of AISI-H13 ESR grade for Aluminum Pressure Die Casting and other part subjected to high working temperatures and high weight quality. H13 is completely ultrasonic examined with 100% positive outcomes according to NDT standards.

     

    Steel Properties:

    • Great toughness

    • Thermal conductivity

    • High hot-wear resistance

    • Hot tensile strength

    • Insusceptible for hot cracking (Hot Crack resistant)

    • Can be water-cooled to a restricted degree

    • High Hardenability

    Application:

    This steel is especially used for ejector pins, tool holders and shrink work chucks. It is majorly widely utilized for manufacture of hot forging die & inserts, hot gripper dies, hot nut tools, hot header dies, brass forging and pressing dies, hot forging aluminum base dies, aluminum casting and extrusion dies, zinc die casting dies, extrusion mandrels, cores, die holder blocks, hot press dies, hot work punches, etc.

    Yes! I am interested
    Get CALLBACK

    SKD6 Die Steel Round Bars

    SKD6 Die Steel Round Bars
     
    Get Best Quote
    Approx. Rs 145 / Kilogram
    Get Latest Price

    Product Details:
    Minimum Order Quantity200 Kilogram
    Single Piece Length3 - 18 Meter
    Usage/ApplicationConstruction
    Surface FinishGalvanized
    ShapeRound
    Diameter71 - 300 mm
    Hardness HBmax 230
    CoolingFurnace
    Hardness after quenching HRC54 HRC
    Hardening Degree C1000-1030 Deg C

    Chemical Composition - (Typical Analysis in %)

    STANDARDS

    X37CrMoV5

    H11

    DIN 2343

    AISI H11

    AFNOR Z38CDV5

    JIS SKD6


    C

    Si

    Mn

    P

    S

    Cr

    Mo

    V

    0.33-0.41

    0.80-1.00

    0.25-0.50

    0.003 max

    0.030max

    4.80-5.50

    1.10-1.50

    0.30-0.50


    USA

    Europe

    Germany

    China

    Japan

    India

    R. of Korea

    Russia

    AISI / SAE

    En

    DIN, WNr

    GB

    JIS

    IS

    KS

    GOST

    H11

    X37CrMoV5-1

    X38CrMoV5-1

    4Cr5MoSiV

    SKD6

    XT35Cr5Mo1V3

    STD 6

    4Ch5MFS


    Ventura Alloy and Steels Supplies and Stocks AISI H11 tool steel is a 5% chromium hot work tool steel that is represented by its excellent impact toughness. Chromium hot-work tool steels are designated as group H steels according to the AISI classification system, and specified in ASTM A681 standard. The most commonly used chromium hot-work steels are H11 tool steel, H12 tool steel, and H13 steel, within the series from H1 to H19.


    If we compare between H11 and H13, H11 tool steel consists of less vanadium than the commonly used H13 hot work tool steel. This gives H11 steels the higher toughness, with some reduction in wear resistance and tamper resistance. H11 tool steel is a deep-hardening, air-hardening steel and H11 alloy steel could be deep hardened by heat treatment and air-quenching. That gives minimal size change during heat treatment. H11 how work steel also has super resistance to thermal fatigue cracking and superb resistance to gross cracking and thermal shock when water cooled in service.


    H11 steel is inclusive of all hot work tool steel with excellent rigidity and durability along with great thermal conductivity and invulnerability to hot cracking and can be water cooled to a constrained degree. H11 is primarily used for apparatus holders , ejector pins and shrink fit chucks.


    STEEL PROPERTIES

    • Contains 5% Chromium

    • Greater strength

    • High toughness

    • Best thermal physical phenomenon

    • Resistant to hot cracking

    • Gives fundamental necessities to long tool life in press forging, die-casting, extrusion processes etc.


    APPLICATION

    This grade isn't utilized for typical applications in the area of hot-work steels, yet additionally useful for tool holders, bridge kind tools, ejector pins, liner holders, hot work punches, forging dies, and shrink work chucks.


    SIZE RANGE

    ROUNDS - 71 to 300 MM DIA

    FLATS - Thickness - 20 to 400 MM MAX | Width - 40 to 700 MM MAX


    PRICE RANGE -
    Rs.130-180 per Kg


    STOCKING PARTNERS

    We keep the materials from China.


    Yes! I am interested
    Get CALLBACK

    Alloy Steel Rounds Bars

    Alloy Steel Rounds Bars
     
    Get Best Quote
    Approx. Rs 150 / Kilogram
    Get Latest Price

    Product Details:
    Minimum Order Quantity200 Kilogram
    ShapeRound
    Single Piece Length3 - 18 Meter
    Usage/ApplicationConstruction
    TechniqueHot Rolled
    MaterialAlloy Steel
    Thickness/Diameter60 to 1000 mm
    Hardness HBMax 240
    CoolingFurnace
    Standard Thickness Available mm126 - 458 mm
    Standard Width Available mm160 - 610 mm
    Hardening Degree C840 - 900 Deg C
    Tensile StrengthCorresponding to Hardness 1220 -1390 N/mm2

    Ventura Alloy and Steels Stocks and Supplies Stainless Steel Rounds Bars in India and abroad. DB6 Steel is an extreme pass on steel with high treating resistance and great through-solidifying properties. Its nickel substance has it uncommonly effect safe – a highly recommendable element for vast mallet & press bites the dust alike. This evaluation is generally supplied in toughened condition or extinguished and tempered to 1300 N/mm² & a working hardness of 370 to 410 HB (round) or 355 to 400 HB (square, level).


    Utilized as standard steel for manufacturing passes on of different kinds, press bites the dust, expulsion kicks the bucket, retainer plates, heavily clad trim bites the dust, hot shear sharpened pieces of steels and instrument holder.

    Utilized as standard steel for manufacturing passes on of different kinds, press bites the dust, expulsion kicks the bucket, retainer plates, heavily clad trim bites the dust, hot shear sharpened pieces of steels and instrument holder.

    Utilized as standard steel for manufacturing passes on of different kinds, press bites the dust, expulsion kicks the bucket, retainer plates, heavily clad trim bites the dust, hot shear sharpened pieces of steels and instrument holder.

     

    Process Route:

    Eaf+Lf+Vd+Upset+Forged+Annealed+Rough Turned For Rounds/Milled For Flats+Oil Quenched And Double Tempered+ Rough Turned For Rounds/Milled For Flats


    Steel Properties:
    The special Hot Work Pre-hardened Steel has great toughness and high wear resistance. DB6 Steel is generally supplied in hard, quenched, tempered and also in annealed condition in special cases. Usually it's working hardness is 360-430 BHN. This steel grade is the upgraded version of DIN 2713 for greater efficiency and performance.


    Application:
    Dies for Specially Drop and Close Die Forgings for Hammers & Mechanical Presses, Die Moulds, Shoe Blocks, Die Holder, Cassettes, Piston Rods, Cranks, Boaster, Shearing Blades, Tools, Plastic Moulds etc.

    Yes! I am interested
    Get CALLBACK

    2606 Die Steel Round Bar

    2606 Die Steel Round Bar
     
    Get Best Quote
    Approx. Rs 350 / Kilogram
    Get Latest Price

    Product Details:
    Minimum Order Quantity200 Kilogram
    Single Piece Length3 - 18 Meter
    ShapeRound
    Hardening Degree C1030-1130
    CoolingFurnace
    Soft annealing Degree C820
    Coefficient of thermal expansionat Degree C20-500
    MaterialAlloy Steel
    Hardness HBmax 240
    Hardness after quenching HRC57
    QuenchingOil or Hot Bath 500-550 Degree C

    Chemical Composition - (Typical Analysis in %)

    STANDARDS

    X37CrMoW5-1

    H12

    DIN 2606

    AISI H12

    AFNOR 32CDV12-28

    JIS SKD62


    C

    Si

    Mn

    P

    S

    Cr

    W

    Mo

    V

    0.30-0.40

    0.80-1.25

    0.20-0.60

    0.003 max

    0.030max

    4.75-5.50

    1.00-1.70

    1.25-1.75

    0.20-0.50


    USA

    Germany

    Japan

    British

    AISI / SAE

    DIN, WNr

    JIS G4404

    BS 4659

    H12 / T20812

    1.2605 / X35CrWMoV5

    SKD62

    BH12


    H12 Hot Work Die Steel could be a five-hitter Cr, general hot work steel that is characterized by wonderful effect strength. It contains less vanadium than the broadly utilized H13 hot work tool steel, and furthermore the tungsten content gives higher temper resistance. It has smart resistance to thermal fatigue cracking (heat checking) and excellent resistance to gross cracking and thermal shock once water cooled in commission. TLS H12 hot work tool steel is normally prescribed for warm tooling applications wherever most resistance from cracking is required. Such applications grasp die casting, hot punches, hot shear cutting edges, shaping dies, extrusion tooling and hot gripper dies.


    Steel Properties:

    • Magnificent Resistance to Wear
    • High Strength at Elevated Temperature
    • Homogenizing with High Toughness
    • Additional Fine Structure without Grain-Boundary Carbide


    Physical Properties:

    Coefficient of Thermal Expansion at °C

    10¯??? m / (m*K)

    20-100

    11.7

    20-250

    12.4

    20-500

    12.9

     

    Price Range: Rs.350 to 750/ Kg

    Yes! I am interested
    Get CALLBACK

    DB6 Alloy Steel Rods

    DB6 Alloy Steel Rods
     
    Get Best Quote
    Approx. Rs 150 / Kilogram
    Get Latest Price

    Product Details:
    Minimum Order Quantity200 Kilogram
    Single Piece Length6 meter
    TechniqueHot Rolled
    ApplicationConstruction
    ShapeRounds
    MaterialAlloy Steel
    Hardness after quenching HRC55-57 HRC
    CoolingFurnace
    Round60 to 1000 mm
    Hardness HBMax 240
    Hardening Degree C840-900 Deg C

    We are offering DB6 Stainless Steel Rods to our clients.


    Chemical Composition - (Typical Analysis in %)


    STANDARDS

    55NiCrMoV7

    DB6

    DIN 2714

    AISI L6

    AFNOR 55NCDVV7

    JIS SKT4

     

    C

    Si

    Mn

    P

    S

    Cr

    Ni

    Mo

    V

    0.50-0.60

    0.10-0.40

    0.65-0.95

    <0.015

    <0.004

    1.0-1.20

    1.50-1.80

    0.45-0.55

    0.07-0.12

     

    USA

    Europe

    Germany

    China

    Japan

    India

    R. of Korea

    Russia

    AISI / SAE

    En

    DIN, WNr

    GB

    JIS

    IS

    KS

    GOST

    A681 L6

    55NiCrMoV7

    56NiCrMoV7

    5CrNiMo

    SKT4

    T55Ni7Cr4Mo5V1

    STF4

    4ChMNFS

     

    Ventura Alloy and Steels Stocks and Supplies Die Block Steels DB6 / 2714 in India and abroad. DB6 Steel is an extreme pass on steel with high treating resistance and great through-solidifying properties. Its nickel substance has it uncommonly effect safe – a highly recommendable element for vast mallet & press bites the dust alike. This evaluation is generally supplied in toughened condition or extinguished and tempered to 1300 N/mm² & a working hardness of 370 to 410 HB (round) or 355 to 400 HB (square, level).

    Utilized as standard steel for manufacturing passes on of different kinds, press bites the dust, expulsion kicks the bucket, retainer plates, heavily clad trim bites the dust, hot shear sharpened pieces of steels and instrument holder.


    Utilized as standard steel for manufacturing passes on of different kinds, press bites the dust, expulsion kicks the bucket, retainer plates, heavily clad trim bites the dust, hot shear sharpened pieces of steels and instrument holder.

     

    Process Route:

    Eaf+Lf+Vd+Upset+Forged+Annealed+Rough Turned For Rounds/Milled For Flats+Oil Quenched And Double Tempered+ Rough Turned For Rounds/Milled For Flats


    Steel Properties:
    The special Hot Work Pre-hardened Steel has great toughness and high wear resistance. DB6 Steel is generally supplied in hard, quenched, tempered and also in annealed condition in special cases. Usually it's working hardness is 360-430 BHN. This steel grade is the upgraded version of DIN 2713 for greater efficiency and performance.


    Application:
    Dies for Specially Drop and Close Die Forgings for Hammers & Mechanical Presses, Die Moulds, Shoe Blocks, Die Holder, Cassettes, Piston Rods, Cranks, Boaster, Shearing Blades, Tools, Plastic Moulds etc.

    Yes! I am interested
    Get CALLBACK

    EN31/AISI 52100/100Cr6

    EN31/AISI 52100/100Cr6
    Approx. Price: 83 / Kg
     
    Get Best Quote
    Explore More Products
    X
    Find UsAashish Shah (Chairman & Managing Director) Ventura Alloy And Steels Private Limited
    Unit No.1201 & 1202, Ghanshyam Enclave P. Co-Op, Soc. Ltd., New Link Road, Kandivali West, Mumbai - 400067, Maharashtra, India
    SEND SMS
    SEND E-MAIL
    Share Us: